Process Control Redundancy Solution – Honeywell TC-CCR013 | C300 Controller Series
Where This Product Is Used
The Honeywell TC-CCR013 Redundant Net Interface Module is a critical component deployed in high-availability Distributed Control System (DCS) architectures built on the Honeywell Experion PKS platform. It is specified by process engineers and control system integrators across the following industries and applications:
- Oil & Gas Refineries – Continuous process monitoring and control where unplanned downtime is unacceptable. The TC-CCR013 enables bumpless switchover between primary and redundant controllers.
- Petrochemical & Chemical Plants – Reactor loop control, distillation column management, and safety interlock systems requiring fault-tolerant network communication.
- Power Generation (Thermal, Nuclear, Hydro) – Turbine control, boiler management, and grid synchronization systems where controller redundancy is mandated by plant safety standards.
- Pulp & Paper Mills – Continuous digester and recovery boiler control with zero-tolerance for communication loss between C300 controller pairs.
- Pharmaceutical & Biotech Manufacturing – FDA-regulated batch and continuous processes requiring validated, redundant control infrastructure.
- Water & Wastewater Treatment – Municipal and industrial water systems where controller availability directly impacts public safety compliance.
Technical Specifications
| Part Number | TC-CCR013 |
| Manufacturer | Honeywell Process Solutions |
| Series | C300 Controller / Experion PKS |
| Module Type | Redundant Net Interface Module (RNIM) |
| Function | Provides redundant FTE (Fault Tolerant Ethernet) network interface for C300 controller pairs |
| Communication Protocol | Fault Tolerant Ethernet (FTE) – Honeywell proprietary dual-path Ethernet |
| Redundancy Type | Hot standby, bumpless switchover |
| Mounting | C300 Controller Chassis (Series C backplane) |
| Weight | 440 g |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Humidity | 5% to 95% non-condensing |
| Power Supply | Supplied via C300 chassis backplane |
| Certifications | CE, UL, cUL (refer to Honeywell product documentation for full listing) |
Why Engineers Specify This Model
- True Hot-Standby Redundancy – The TC-CCR013 enables seamless, bumpless failover between primary and backup C300 controllers with no process disruption, meeting IEC 61511 and ISA-84 functional safety requirements.
- FTE Dual-Path Architecture – Honeywell’s Fault Tolerant Ethernet provides two independent network paths, eliminating single points of failure at the network interface level.
- Native Experion PKS Integration – Designed exclusively for the Experion PKS ecosystem, ensuring full compatibility with Honeywell’s engineering tools, diagnostics, and firmware update workflows.
- Reduced MTTR – Hot-swap capability allows module replacement during live operation, minimizing mean time to repair in critical process environments.
- Long Product Lifecycle – Honeywell’s extended support commitment for Experion PKS hardware makes the TC-CCR013 a safe long-term investment for brownfield and greenfield DCS projects.
Complete System Bill of Materials
The TC-CCR013 is typically specified alongside the following Honeywell Experion PKS C300 components:
- TC-CCR014 – C300 Controller Module (primary)
- TC-CCR015 – C300 Controller Module (redundant pair)
- TC-CEN012 – C300 Chassis / Carrier
- TC-PSA021 – Power Supply Assembly for C300 chassis
- 51304485-150 – FTE Network Switch (Cisco IE series, Honeywell-qualified)
- TC-FPCXX – Field Processor Card (series dependent on I/O count)
- CC-TAIX01 / CC-TAOX01 – Analog I/O Termination Assemblies
Contact Konmask for complete BOM assistance and cross-reference support.
Compliance & Industry Standards
- IEC 61511 – Functional Safety: Safety Instrumented Systems for the Process Industry
- ISA-84 – Application of Safety Instrumented Systems for the Process Industries
- IEC 61158 / IEC 61784 – Industrial Communication Networks (Fieldbus standards)
- CE Marking – European conformity for electromagnetic compatibility and low voltage
- UL / cUL Listed – North American safety certification
- RoHS Compliant – Restriction of Hazardous Substances (where applicable per product revision)
Quality Assurance & Sourcing
Konmask.com sources the Honeywell TC-CCR013 through verified industrial automation supply channels. Every unit offered is subject to the following quality controls:
- Visual & Physical Inspection – Connectors, backplane contacts, and module housing inspected for damage, corrosion, or counterfeit indicators prior to listing.
- Traceability Documentation – Original manufacturer labels, date codes, and revision markings are verified and documented.
- Functional Test Records – Where available, factory test records or third-party bench test reports are retained on file.
- Secure Packaging – Modules are shipped in ESD-safe packaging with foam cushioning to prevent transit damage.
- Warranty – 12-month replacement warranty against defects in materials and workmanship.
How to Source This Part
To place an order or request a quotation for the Honeywell TC-CCR013:
- Email: support@konmask.com
- Phone / WhatsApp: +0086 19859288691
- Lead Time: Typically 3–7 business days for in-stock units; 2–4 weeks for sourced orders
- Shipping: DHL Express, FedEx International Priority, and sea freight available worldwide
- Payment: T/T (Wire Transfer), PayPal, and trade credit terms available for qualified accounts
Application-Specific FAQ
Q: Can the TC-CCR013 be used with older Experion PKS releases (e.g., R310, R400)?
A: Compatibility depends on the firmware revision of the module and the Experion PKS release. Konmask recommends confirming the exact revision code before ordering for legacy system upgrades. Contact us with your current system version for guidance.
Q: Is the TC-CCR013 interchangeable with the TC-CCR014?
A: No. The TC-CCR013 is the Redundant Net Interface Module, while the TC-CCR014 is the C300 Controller Module itself. They serve distinct functions within the C300 chassis and are not interchangeable.
Q: What happens if the TC-CCR013 fails during operation?
A: In a properly configured redundant C300 pair, the system will automatically switch to the backup controller’s network interface. The failed TC-CCR013 can be replaced hot (without shutting down the process) in most configurations.
Q: Do you supply the full C300 redundant controller pair (TC-CCR013 + controller modules)?
A: Yes. Konmask can supply complete C300 redundant controller assemblies including chassis, power supplies, controller modules, and interface modules. Contact us for a complete BOM quote.
Q: What is the export classification for this product?
A: The TC-CCR013 may be subject to US EAR export controls. Buyers are responsible for verifying applicable export regulations in their jurisdiction. Konmask provides documentation support for export compliance upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
