Process Control Solution – HONEYWELL MC-PHAI01 | Experion PKS / TDC 3000 Series
The HONEYWELL MC-PHAI01 (51403479-150) is a high-integrity Analog Input Module with HART communication, engineered for mission-critical process measurement in distributed control systems. Designed for seamless integration into Honeywell’s Experion PKS and legacy TDC 3000 platforms, this module delivers accurate, noise-immune signal acquisition from field transmitters across refining, chemical, and power generation environments.
Where This Product Is Used
The MC-PHAI01 is specified by process engineers and control system integrators across the following industries and applications:
- Oil & Gas Refining: Crude distillation column temperature and pressure profiling; feed-forward control loops requiring HART diagnostics from smart transmitters.
- Petrochemical & Chemical Plants: Reactor temperature monitoring, flow measurement via differential pressure transmitters, and level control in storage tanks.
- Power Generation: Boiler drum level, steam header pressure, and turbine inlet temperature acquisition in DCS-based plant control rooms.
- Pulp & Paper: Digester pressure and temperature loops; bleach plant pH and conductivity measurement via HART-enabled analyzers.
- Water & Wastewater Treatment: Flow totalization, pH monitoring, and dissolved oxygen measurement integrated into SCADA/DCS hybrid architectures.
- Pharmaceutical Manufacturing: Validated batch process temperature and pressure acquisition under FDA 21 CFR Part 11 environments.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | MC-PHAI01 / 51403479-150 |
| Manufacturer | Honeywell Process Solutions |
| Module Type | Analog Input with HART |
| Input Channels | 16 channels (single-ended) / 8 channels (differential) |
| Input Signal Range | 4–20 mA (HART), 0–20 mA, 1–5 VDC |
| HART Protocol | HART 5 / HART 7 compatible (pass-through to DCS host) |
| Resolution | 16-bit ADC |
| Accuracy | ±0.05% of full scale |
| Isolation | Channel-to-channel and channel-to-bus isolation |
| Power Consumption | Supplied via I/O Link bus (no external power required) |
| Operating Temperature | 0°C to +60°C (32°F to 140°F) |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% RH, non-condensing |
| Weight | 750 g |
| Compatible Platform | Honeywell Experion PKS, TDC 3000, PlantScape |
| Form Factor | Standard Honeywell I/O card — rack-mounted |
Why Engineers Specify This Model
- Native HART Pass-Through: Enables remote device diagnostics, calibration, and configuration from the DCS operator station without additional HART multiplexers — reducing field maintenance costs.
- High Channel Density: Up to 16 analog inputs per card minimizes rack space and cabinet footprint in brownfield expansions.
- 16-Bit Resolution: Delivers sub-0.1% accuracy critical for custody transfer, emissions monitoring, and advanced process control (APC) applications.
- Galvanic Isolation: Protects the DCS backplane from ground loops and transient surges common in industrial field wiring environments.
- Hot-Swap Capable: Supports online replacement without process shutdown when used with redundant I/O configurations — essential for continuous process plants.
- Backward Compatibility: Drop-in replacement for legacy TDC 3000 AI cards, enabling phased migration to Experion PKS without full I/O rewiring.
Complete System Bill of Materials
For a complete Honeywell Experion PKS analog input subsystem, the following components are typically specified alongside the MC-PHAI01:
- MC-PHAI01 / 51403479-150 — Analog Input Module with HART (this item)
- MC-TAIH02 — I/O Termination Assembly (field wiring termination panel)
- MC-PAIH03 — I/O Link Cable (module-to-termination assembly)
- 51401642-100 — Experion PKS C300 Controller (process controller)
- 51304485-100 — Experion PKS IOLINK Extender (for remote I/O cabinets)
- 51196655-100 — Redundant Power Supply Module
- 51401196-100 — Experion PKS I/O Chassis / Rack
Contact our technical team to verify BOM compatibility with your specific Experion PKS release version.
Compliance & Industry Standards
- CE Marking — Compliant with EU EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
- UL/cUL Listed — UL 508 Industrial Control Equipment
- HART Communication Foundation — HART 5 and HART 7 protocol certified
- IEC 61131-2 — Programmable Controller Hardware Standard
- ISA-5.1 — Instrumentation Symbols and Identification (loop documentation compatibility)
- RoHS Compliant — Restriction of Hazardous Substances Directive 2011/65/EU
- SIL Capable — Suitable for use in Safety Instrumented Systems (SIS) up to SIL 2 when configured per Honeywell SIL documentation
Quality Assurance & Sourcing
At Konmask.com, every Honeywell module undergoes a structured verification process before dispatch:
- Visual Inspection: Board-level examination for physical damage, corrosion, bent pins, and label integrity.
- Firmware Version Check: Confirmed against Honeywell’s published compatibility matrix for the target DCS platform version.
- Functional Bench Test: Where test equipment is available, modules are powered and channel continuity is verified prior to shipment.
- Authentic Sourcing: Procured from authorized Honeywell distributors, certified system integrators, and decommissioned plant inventories with documented chain of custody.
- Packaging: Anti-static ESD bags, foam-lined cartons, and moisture-barrier packaging for international freight.
How to Source This Part
- Add to Cart — Place your order directly on this page. Stock is limited; availability is confirmed at checkout.
- Request a Quote — For bulk orders (5+ units), OEM procurement, or project BOM sourcing, email support@konmask.com with your project details.
- Lead Time: In-stock units ship within 2–5 business days. Out-of-stock items are sourced within 2–4 weeks depending on global availability.
- Export & Customs: We handle export documentation (commercial invoice, packing list, COO) for international shipments. HS Code available on request.
- Payment: T/T (bank transfer), PayPal, and major credit cards accepted. LC available for orders above USD 10,000.
Application-Specific FAQ
Q: Is the MC-PHAI01 compatible with Experion PKS R500 and later releases?
A: Yes. The MC-PHAI01 is supported across Experion PKS R400 through R500+. Confirm your IOLINK firmware version with Honeywell’s compatibility matrix or contact our team for verification.
Q: Can this module replace a legacy TDC 3000 High-Level Analog Input (HLAI) card?
A: The MC-PHAI01 is designed for the Experion PKS IOLINK architecture. For direct TDC 3000 HLAI replacement, the correct part is the 51304362-175 or equivalent. Contact us to confirm the correct migration path for your system.
Q: Does HART pass-through require additional software licensing on the Experion PKS host?
A: HART pass-through is enabled via Honeywell’s FDM (Field Device Manager) software. An FDM license is required on the Experion server. The MC-PHAI01 hardware itself does not require additional licensing.
Q: What is the maximum cable length from the module to field transmitters?
A: Honeywell recommends a maximum loop resistance of 600Ω for 4–20 mA HART loops. Practical cable lengths depend on wire gauge; 24 AWG twisted-pair supports runs up to approximately 1,500 meters under typical conditions.
Q: Can we order a tested/refurbished unit with a warranty?
A: Yes. Konmask offers tested units with a 90-day functional warranty. Extended warranty and on-site commissioning support are available — contact us for terms.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


