KUKA KPP600-20-320 Servo Drive | KRC4 Power Supply Module – Replacement, Equivalent & Selection Guide
The KUKA KPP600-20-320 (Part No. 00-245-213) is the dedicated servo drive power supply module for the KUKA KRC4 robot controller platform. It provides regulated DC bus power to the KSP (Servo Pack) axes drives, enabling precise motion control for KUKA industrial robots including the KR 30 and related series. Konmask.com supplies genuine and compatible-grade units with full traceability for B2B industrial buyers.
Technical Specifications
- Part Number: KPP600-20-320 / 00-245-213
- Compatible Controller: KUKA KRC4
- Function: Servo Drive Power Supply Module (KPP)
- DC Bus Output: 320 V DC
- Input Voltage: 3-phase AC 400 V / 480 V ±10%
- Rated Current: 20 A continuous
- Associated Robot Models: KR 30, KR 60, KR 120, KR 150 (KRC4 platform)
- Related Part Numbers: 00-184-319, 00-107-224
- Country of Origin: Germany
- Weight: ~300 g (module only)
- Communication Interface: EtherCAT (KRC4 internal bus)
Compatible Replacement & Equivalent Models
When sourcing a replacement for the KPP600-20-320, the following models are functionally equivalent or directly interchangeable within the KRC4 ecosystem:
- KUKA 00-245-213 – OEM part number, identical unit
- KUKA 00-184-319 – Alternate revision, same electrical spec
- KUKA 00-107-224 – Earlier BOM revision, compatible with KRC4 firmware ≥ V8.2
- Mitsubishi RV320E-185 / RV-20E-121 – Reduction gear units referenced in multi-axis configurations; not a direct electrical substitute but commonly co-sourced in KR30 rebuild kits
Always verify firmware version and cabinet revision before substituting. Contact Konmask.com for cross-reference validation.
Why Choose the Original KPP600-20-320
- Factory-calibrated DC bus voltage ensures axis synchronization accuracy
- Plug-and-play replacement — no KRC4 parameter re-teaching required
- Full KUKA SafeOperation and WorkVisual compatibility
- Designed for 24/7 industrial duty cycles with integrated thermal protection
- Genuine units carry KUKA serial traceability for warranty and service records
Typical Applications
- KUKA KRC4 controller cabinet power restoration after drive fault
- Preventive maintenance replacement in high-cycle automotive welding lines
- Spare parts inventory for KUKA KR 30 / KR 60 robot cells
- System integrator builds using refurbished KRC4 cabinets
- OEM machine builders requiring certified KUKA drive components
System Compatibility
- Controller: KUKA KRC4 (all variants: KRC4 compact, KRC4 smallsize, KRC4 extended)
- Firmware: KSS 8.2 and above recommended
- Drive Bus: EtherCAT-based KRC4 internal servo bus
- Axis Packs: Compatible with KSP 600-3×40, KSP 600-3×20 servo packs
- Safety: Compatible with KUKA SafeOperation (SOP) and SafeRangeMonitoring (SRM)
Selection Guide
Use the table below to select the correct KPP module for your KRC4 cabinet:
- KPP600-20-320 (this unit) → Standard KRC4 cabinets, robots up to KR 150 payload
- KPP600-3×64 → High-power KRC4 extended cabinets, KR 210 and above
- KPP600-3×32 → KRC4 compact cabinets, KR 6 / KR 10 / KR 16 series
Not sure which module fits your cabinet? Send your KRC4 serial number to support@konmask.com for a free compatibility check.
Quality Assurance & Sourcing
- Units inspected and function-tested prior to dispatch
- Sourced from authorized KUKA distribution channels and certified refurbishers
- Each unit ships with test report and traceability documentation
- Packaging: ESD-safe anti-static bag + foam-lined carton
- Lead time: In-stock units ship within 1–3 business days; special orders 7–14 days
How to Order
- Online: Add to cart directly on this page
- Email RFQ: support@konmask.com — include quantity, delivery address, and required documentation
- Phone / WhatsApp: +0086 19859288691
- Bulk / OEM pricing: Available for orders of 3+ units — contact us for a quote
Replacement & Compatibility FAQ
Q: Can I use 00-184-319 instead of KPP600-20-320?
A: Yes. KUKA 00-184-319 is an alternate part number for the same module family. Confirm your KRC4 cabinet revision matches.
Q: Is the KPP600-20-320 compatible with KRC2 controllers?
A: No. The KPP600 series is exclusively designed for KRC4 architecture. KRC2 uses a different power supply topology.
Q: What does the Mitsubishi RV320E-185 have to do with this product?
A: The RV320E-185 and RV-20E-121 are reduction gear units used in KUKA KR30 robot joints. They are often co-sourced during full robot refurbishment alongside the KPP drive module.
Q: Do you offer a warranty?
A: Yes — 90-day functional warranty on all tested units. Extended warranty available on request.
Q: Can you provide a certificate of conformity?
A: Yes, available upon request for all genuine KUKA units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
