Rotork IQT MOD6G Electric Actuator Module | Replacement, Equivalent & Selection Guide
The Rotork IQT MOD6G is an unprogrammed, standard-temperature electric actuator module from Rotork’s IQT series — engineered for quarter-turn valve automation in demanding industrial environments. This page serves as a comprehensive selection, replacement, and compatibility reference for procurement engineers, system integrators, and MRO buyers.
Technical Specifications
- Manufacturer: Rotork
- Model / SKU: IQT MOD6G
- Series: IQT (Intelligent Quarter-Turn)
- Type: Electric Actuator Module – Unprogrammed
- Temperature Rating: Standard Temperature
- Operation: Quarter-turn (90°)
- Output Torque Range: Refer to IQT series datasheet (MOD6G torque class)
- Power Supply: Configurable (single/three-phase, per site requirements)
- Enclosure: IP68 / NEMA 4X rated (IQT standard)
- Control Interface: Hardwired / HART / Fieldbus (configurable at commissioning)
- Weight: Approx. 800 g (module only)
- Condition: New, unprogrammed — requires site-specific configuration before installation
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as direct or functional replacements for the Rotork IQT MOD6G. Always verify torque class, voltage, and control interface before substitution:
- Rotork IQT MOD6F – Previous-generation equivalent; same torque class, different firmware revision
- Rotork IQT MOD6H – Upgraded variant with extended diagnostics
- Rotork IQT125 / IQT250 – Full actuator assemblies incorporating MOD6G-class modules
- Auma SA 07.2 / SA 10.2 – Cross-brand functional equivalent for quarter-turn duty (verify mounting interface)
- Biffi ICON2000 – Alternative intelligent quarter-turn actuator for comparable applications
- Emerson EIM TEC2000 – Functional equivalent in multi-turn/quarter-turn hybrid configurations
Note: Cross-brand replacements require mechanical adapter kits and control re-wiring. Contact Konmask for compatibility assessment.
Why Choose the Original Rotork IQT MOD6G
- Factory-matched torque and speed characteristics — no field calibration of mechanical parameters required
- Full Rotork IQT ecosystem compatibility: Bluetooth commissioning tool, IQ-Insight software, and Rotork Asset Management
- Genuine Rotork warranty and traceability documentation
- Proven reliability in oil & gas, water treatment, and power generation sectors
- Unprogrammed stock allows flexible site-specific configuration without lead-time penalties
Typical Applications
- Quarter-turn valve automation (ball valves, butterfly valves, plug valves)
- Pipeline isolation and control in oil & gas upstream/midstream/downstream
- Water and wastewater treatment plant valve control
- Power station auxiliary systems
- Chemical and petrochemical process control
- HVAC and building services large-bore valve actuation
System Compatibility
- DCS Integration: Compatible with ABB System 800xA, Honeywell Experion, Emerson DeltaV, Yokogawa CENTUM via hardwired or fieldbus I/O
- PLC Integration: Siemens S7-300/400/1500, Allen-Bradley ControlLogix/CompactLogix, Schneider Modicon M340/M580
- Fieldbus Protocols: HART, PROFIBUS PA/DP, Foundation Fieldbus H1, Modbus RTU (module-dependent; confirm at order)
- Mounting: ISO 5211 quarter-turn flange interface (F05–F14 depending on torque class)
Selection Guide
Use the following criteria to confirm the IQT MOD6G is the correct selection for your application:
- Step 1 – Torque: Calculate required valve torque (breakaway + running). MOD6G covers a specific torque band — confirm against Rotork IQT torque tables.
- Step 2 – Temperature: Standard temperature rating suits –20 °C to +70 °C ambient. For extreme cold or high-temperature duty, specify IQT MOD6G-LT or HT variants.
- Step 3 – Power Supply: Confirm site voltage (110 VAC / 220 VAC / 380 VAC / 24 VDC) and phase configuration before ordering.
- Step 4 – Control Signal: Specify hardwired (open/close/ESD), analog (4–20 mA), or digital fieldbus control at commissioning.
- Step 5 – Hazardous Area: Standard MOD6G is non-Ex. For ATEX/IECEx zones, specify the Ex-rated IQT variant.
Quality Assurance & Sourcing
- All units sourced through authorized Rotork distribution channels or verified surplus with full traceability
- Pre-shipment inspection available upon request (functional test report provided)
- Packaging: original OEM packaging where available; protective anti-static packaging for surplus stock
- Lead time: in-stock units ship within 3–5 business days; factory-order units per Rotork lead time
- Export documentation: commercial invoice, packing list, COO certificate available for international orders
How to Order
- Online: Add to cart directly on this page — our team will confirm stock and configuration before dispatch
- Email RFQ: Send your BOM or datasheet to support@konmask.com for a formal quotation
- Phone / WhatsApp: +0086 19859288691 (Mon–Fri, 09:00–18:00 CST)
- Please provide: quantity, required delivery date, site voltage, and any special certifications needed
Replacement & Compatibility FAQ
Q: Can I use the IQT MOD6G as a direct drop-in replacement for an older IQT module?
A: In most cases yes, provided the torque class and mounting flange match. Firmware re-configuration via Rotork Bluetooth tool is required.
Q: Is the MOD6G compatible with ATEX Zone 1 installations?
A: No — the standard MOD6G is not Ex-rated. Specify the IQT Ex variant for hazardous area use.
Q: Can Konmask supply a programmed/configured unit?
A: Yes. Provide your site configuration data sheet and we can arrange pre-commissioning before shipment.
Q: What is the difference between MOD6G and MOD6F?
A: MOD6G is the current-generation module with updated electronics and improved diagnostics. MOD6F is the prior revision — functionally similar but no longer in production.
Q: Do you offer volume pricing for MRO or project orders?
A: Yes. Contact us with your project quantity for tiered pricing and framework agreement options.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
