Siemens 6ES7134-4JB00-0AB0 2-Channel Analog Input Module | Replacement, Equivalent & Selection Guide
The Siemens 6ES7134-4JB00-0AB0 is a 2-channel analog input electronic module for the SIMATIC ET 200S distributed I/O system. Designed for high-precision signal acquisition in demanding industrial environments, this module supports current and voltage measurement with 15-bit resolution. Whether you are sourcing an original unit, evaluating a compatible replacement, or selecting the right analog input module for your application, this guide covers everything you need.
Technical Specifications
- Part Number: 6ES7134-4JB00-0AB0
- Series: SIMATIC ET 200S
- Module Type: Electronic Module — Analog Input
- Number of Channels: 2
- Input Signal Types: Current (0–20 mA, 4–20 mA) / Voltage (±10 V, 0–10 V)
- Resolution: 15-bit + sign
- Conversion Time: 2 ms per channel (basic cycle)
- Supply Voltage: 24 V DC (via backplane bus)
- Isolation: Electrically isolated between channels and backplane
- Dimensions (W×H×D): 15 mm × 81 mm × 52 mm
- Weight: approx. 80 g
- Operating Temperature: 0 °C to +60 °C
- Protection Rating: IP20
- Certifications: CE, UL, cULus, ATEX (Zone 2)
- Compatible Interface Module: IM 151-1 / IM 151-3 PN / IM 151-7 CPU
Compatible Replacement & Equivalent Models
If the 6ES7134-4JB00-0AB0 is discontinued, out of stock, or over budget, the following models offer functional compatibility or direct replacement:
- 6ES7134-4FB01-0AB0 — ET 200S 2-ch analog input, 4-wire transducer, direct functional equivalent (same channel count, same signal range)
- 6ES7134-4GB01-0AB0 — ET 200S 2-ch analog input for RTD/TC, suitable if temperature measurement is the primary requirement
- 6ES7134-4LB02-0AB0 — ET 200S 4-ch analog input, upgrade option when additional channel density is needed
- 6ES7331-7KF02-0AB0 — S7-300 SM 331 8-ch analog input, suitable for migration to S7-300 rack-based architecture
- Third-party equivalents: Consult Konmask.com for cross-reference to compatible Phoenix Contact, Wago, or Beckhoff analog input modules with equivalent signal ranges
Note: Always verify firmware version, terminal assignment, and parameter settings before substituting modules in a live system.
Why Choose the Original Model
- Guaranteed compatibility with all ET 200S interface modules and STEP 7 / TIA Portal parameter sets
- Siemens-certified quality — factory-tested, traceable serial number, full warranty
- Proven field reliability in automotive, chemical, and process industries worldwide
- Seamless integration with PROFIBUS DP and PROFINET ET 200S stations without additional configuration
- Long-term spare parts availability through Konmask.com authorized sourcing channels
Typical Applications
- Process control: pressure, flow, and level transmitter signal acquisition (4–20 mA loops)
- Machine automation: analog sensor feedback for servo and drive systems
- Building automation: HVAC sensor integration via ET 200S distributed I/O
- Pharmaceutical and food & beverage: precise analog measurement in validated environments
- Energy management: current and voltage monitoring at field level
System Compatibility
- Interface Modules: IM 151-1 Standard, IM 151-1 FO, IM 151-3 PN, IM 151-7 CPU
- Communication: PROFIBUS DP (up to 12 Mbit/s) / PROFINET IO
- Engineering Software: STEP 7 V5.x, TIA Portal V13 and above
- Power Module: PM-E 24 V DC (6ES7138-4CA01-0AA0) required in station
- Terminal Module: TM-E15S26-A1 (6ES7193-4CA40-0AA0) or equivalent
Selection Guide
Use the table below to select the correct ET 200S analog input module for your application:
| Requirement | Recommended Model | Channels | Signal Type |
|---|---|---|---|
| Standard 4–20 mA / ±10 V, 2-ch | 6ES7134-4JB00-0AB0 | 2 | Current / Voltage |
| 4-wire transducer, 2-ch | 6ES7134-4FB01-0AB0 | 2 | Current / Voltage |
| RTD / Thermocouple, 2-ch | 6ES7134-4GB01-0AB0 | 2 | RTD / TC |
| Higher channel density, 4-ch | 6ES7134-4LB02-0AB0 | 4 | Current / Voltage |
| S7-300 migration, 8-ch | 6ES7331-7KF02-0AB0 | 8 | Current / Voltage / RTD |
Quality Assurance & Sourcing
- All units sourced through verified industrial supply channels with full traceability
- Pre-shipment inspection: visual check, label verification, and functional test where applicable
- Anti-counterfeit measures: hologram label, serial number cross-check with Siemens product database
- Packaging: original Siemens ESD-safe packaging or equivalent protective packaging for refurbished units
- Warranty: 12-month warranty on new units; 6-month warranty on tested refurbished units
How to Order
- Confirm your ET 200S interface module model and firmware version
- Verify the required signal type (current / voltage / RTD) and channel count
- Add 6ES7134-4JB00-0AB0 to cart or contact us for bulk pricing
- Specify quantity and preferred lead time at checkout
- For OEM / project orders (>10 units), request a formal quotation via support@konmask.com
Replacement & Compatibility FAQ
Q: Is 6ES7134-4JB00-0AB0 discontinued?
A: Siemens has phased out certain ET 200S variants. Konmask.com maintains stock of both new and tested refurbished units. Contact us for current availability.
Q: Can I replace 6ES7134-4JB00-0AB0 with 6ES7134-4FB01-0AB0 directly?
A: In most cases yes — both are 2-channel analog input modules for ET 200S. However, verify the terminal module type and re-parameterize in STEP 7 / TIA Portal after replacement.
Q: Does this module work with PROFINET ET 200S stations?
A: Yes, when used with a PROFINET-capable interface module such as IM 151-3 PN.
Q: What is the difference between 6ES7134-4JB00-0AB0 and 6ES7134-4LB02-0AB0?
A: The 4JB00 provides 2 channels; the 4LB02 provides 4 channels. Choose 4LB02 when higher channel density is required in the same slot width.
Q: Can Konmask.com provide a certificate of conformity?
A: Yes. A certificate of conformity and test report are available upon request for new units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






