SIEMENS 6SE7090-0XX84-2FA0 SIMOVERT MASTERDRIVES Technology Board | Replacement, Equivalent & Selection Guide
The SIEMENS 6SE7090-0XX84-2FA0 is a Technology Board (T400) designed for use with the SIMOVERT MASTERDRIVES series of AC drives. It provides advanced motion control and technology functions including cam controllers, synchronization, and positioning — enabling precise, high-performance drive applications in industrial automation environments. Konmask.com supplies genuine and compatible units with full traceability.
Technical Specifications
- Manufacturer: SIEMENS
- Part Number / SKU: 6SE7090-0XX84-2FA0
- Series: SIMOVERT MASTERDRIVES (Vector Control / Motion Control)
- Module Type: Technology Board T400 (Option Board)
- Function: Cam controller, synchronization, positioning, technology functions
- Processor: Dedicated DSP-based technology processor
- Interface: Plugs into SIMOVERT MASTERDRIVES option slot
- Communication: Compatible with PROFIBUS-DP and internal drive bus
- Power Supply: Supplied via drive backplane (no external supply required)
- Operating Temperature: 0 °C to +55 °C
- Storage Temperature: −25 °C to +70 °C
- Weight: Approx. 200 g
- Compliance: CE, UL listed (drive-level)
- Country of Origin: Germany
Compatible Replacement & Equivalent Models
If the 6SE7090-0XX84-2FA0 is unavailable or discontinued, the following models may serve as functional replacements or equivalents depending on your drive configuration:
- 6SE7090-0XX84-2FA0 — Original / Genuine (this listing)
- 6SE7090-0XX84-0KA0 — T100 Technology Board (basic technology functions, lower cost alternative)
- 6SE7090-0XX84-0AB0 — CB Communication Board (for PROFIBUS-only applications)
- 6SE7090-0XX84-2EA0 — T300 Technology Board (intermediate feature set)
- 6SE7090-0XX84-2FB0 — T400 variant with extended encoder interface
- 6SL3055-0AA00-4BA0 — SINAMICS S120 CU320-2 (next-generation platform upgrade path)
Note: Always verify firmware version and drive chassis compatibility before substituting option boards. Contact Konmask.com for pre-sales compatibility verification.
Why Choose the Original 6SE7090-0XX84-2FA0
- Full T400 Feature Set: Cam controller, electronic gearbox, synchronization, and positioning functions not available on T100/T300 boards.
- Proven Reliability: Designed and manufactured by SIEMENS to operate within SIMOVERT MASTERDRIVES for the full product lifecycle.
- Seamless Integration: Plug-and-play installation into existing MASTERDRIVES chassis — no rewiring or external power required.
- Firmware Compatibility: Fully supported by SIMOVERT MASTERDRIVES DriveMonitor and STARTER commissioning tools.
- Long-Term Availability: Konmask.com maintains stock of legacy SIEMENS drive components to support installed base maintenance.
Typical Applications
- Printing and converting machinery (register control, web tension)
- Packaging lines (synchronization of multiple drive axes)
- Textile machinery (winding, unwinding, dancer control)
- Metal processing (coil lines, cut-to-length systems)
- Material handling and conveyor systems requiring positioning
- Paper and board production lines
- Plastics extrusion and film lines
System Compatibility
- Compatible Drive Series: SIMOVERT MASTERDRIVES MC (Motion Control), VC (Vector Control)
- Chassis Sizes: Compact PLUS, Compact, and chassis units with option board slots
- Power Range: 0.55 kW to 2300 kW (drive-dependent)
- Firmware: MASTERDRIVES firmware V3.x and above recommended
- Engineering Tools: DriveMonitor, STARTER, SIMATIC S7 with MASTERDRIVES function blocks
- Not Compatible With: SINAMICS G120, S120 (different option board architecture — see upgrade path above)
Selection Guide
Use the table below to select the correct technology board for your SIMOVERT MASTERDRIVES application:
- Basic speed/torque control only → No technology board required (standard CU board)
- Simple technology functions (ramp, PID) → T100: 6SE7090-0XX84-0KA0
- Intermediate positioning & synchronization → T300: 6SE7090-0XX84-2EA0
- Full cam control, electronic gearbox, multi-axis sync → T400: 6SE7090-0XX84-2FA0 ✓ (this product)
- PROFIBUS communication only → CB: 6SE7090-0XX84-0AB0
- New project / platform upgrade → SINAMICS S120 CU320-2: 6SL3055-0AA00-4BA0
Not sure which board fits your drive? Send us your drive nameplate data and we will confirm compatibility within 24 hours.
Quality Assurance & Sourcing
- Source: Authorized distribution channels and verified surplus stock
- Inspection: Each unit visually inspected and function-tested prior to dispatch
- Packaging: Anti-static ESD packaging with original or equivalent protective materials
- Traceability: Batch records and serial number documentation available on request
- Warranty: 12-month warranty against manufacturing defects
- Certification: CE compliant; documentation available upon request
How to Order
- Add 6SE7090-0XX84-2FA0 to your cart and proceed to checkout.
- For bulk orders (5+ units), contact us for volume pricing: [email protected]
- Provide your drive nameplate data if you need compatibility confirmation before ordering.
- Lead time: In-stock units ship within 1–3 business days. Out-of-stock units: 7–21 days sourcing lead time.
- International shipping available — DHL, FedEx, UPS with full export documentation.
Replacement & Compatibility FAQ
Q: Is 6SE7090-0XX84-2FA0 still in production?
A: This part is in the SIEMENS legacy portfolio. Konmask.com maintains stock from verified surplus and authorized channels. Contact us to confirm current availability.
Q: Can I use a T300 board instead of the T400?
A: Only if your application does not require cam control or electronic gearbox functions. The T300 (6SE7090-0XX84-2EA0) has a reduced feature set. We recommend confirming with your machine OEM before substituting.
Q: Will this board work with my SINAMICS G120 or S120 drive?
A: No. The 6SE7090-0XX84-2FA0 is exclusively for SIMOVERT MASTERDRIVES. SINAMICS drives use a different option board architecture.
Q: Do you provide installation support?
A: Yes. Our technical team can provide parameter backup guidance and commissioning checklists. Contact [email protected].
Q: What is the difference between 2FA0 and 2FB0?
A: The 2FB0 variant includes an extended encoder interface for additional encoder types. If your application uses HTL/TTL encoders only, the 2FA0 is sufficient.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
