Condition Monitoring Solution — EMERSON PR9268/617-100-CNS | PR9268 Series
Where This Product Is Used
The EMERSON PR9268/617-100-CNS is an eddy current proximity probe sensor engineered for continuous vibration and displacement monitoring of rotating machinery in demanding industrial environments. Typical deployment sites include:
- Steam & Gas Turbines — shaft radial vibration and axial position measurement per API 670
- Centrifugal Compressors — real-time rotor orbit tracking in petrochemical and LNG plants
- Pumps & Fans — early-warning bearing fault detection in power generation and water treatment
- Gearboxes — gear mesh frequency monitoring in steel mills and cement plants
- Marine Propulsion Systems — shaft displacement monitoring in offshore platforms
- DCS / Safety Instrumented Systems (SIS) — integrated with Emerson DeltaV, Honeywell Experion, or ABB 800xA for automated trip logic
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number (SKU) | PR9268/617-100-CNS |
| Manufacturer | EMERSON (formerly Epro / Bently Nevada compatible) |
| Series | PR9268 |
| Sensor Type | Eddy Current Proximity Probe |
| Measurement | Radial vibration, axial displacement, shaft speed |
| Output Signal | Voltage (DC, proportional to gap) |
| Cable Length | 100 in (≈ 2.54 m) — integral armored cable |
| Connector | CNS (coaxial, standard) |
| Operating Temperature | −40 °C to +120 °C |
| Weight | 960 g (including cable) |
| Ingress Protection | IP67 |
| Compatible Driver / Conditioner | PR9376, PR9268 series drivers; Bently Nevada 3300 XL compatible |
Why Engineers Specify This Model
- Drop-in Bently Nevada 3300 compatibility — same sensitivity (8 mV/µm) and gap range, enabling direct replacement without recalibration of existing monitoring racks
- Armored integral cable — eliminates field-splice failure points common in high-vibration environments
- CNS connector — industry-standard coaxial termination for fast, tool-free swap-out during planned outages
- Wide temperature range — qualified for hot-section turbine bearing pedestals and cryogenic compressor applications
- Proven EMERSON / Epro lineage — traceable calibration certificates available; preferred by OEM machinery builders worldwide
Complete System Bill of Materials
For a fully functional proximity probe monitoring loop, the following components are typically required:
- Proximity Probe: PR9268/617-100-CNS (this item)
- Extension Cable: PR9268/010-xxx (field-selectable length)
- Driver / Signal Conditioner: PR9376/010-xxx or equivalent
- Monitoring Module: Emerson CSI 6500 / Bently Nevada 3500 rack card
- DCS I/O Card: 4–20 mA or ±24 V DC analog input module
- Mounting Hardware: Probe holder, lock nut, and bracket (application-specific)
Contact [email protected] for complete BOM quotations and system integration support.
Compliance & Industry Standards
- API 670 — Machinery Protection Systems (5th Edition)
- IEC 60068-2 — Environmental testing (vibration, shock, temperature)
- ATEX / IECEx — Consult datasheet for zone classification; intrinsically safe variants available
- ISO 10816 / ISO 20816 — Mechanical vibration evaluation of machines
Quality Assurance & Sourcing
Konmask.com sources the PR9268/617-100-CNS exclusively through authorized industrial distribution channels and verified surplus inventory with full traceability. Every unit shipped includes:
- Original manufacturer packaging (where available) or ESD-safe anti-static packaging
- Batch / date code documentation
- Optional third-party inspection report upon request
- 90-day warranty against manufacturing defects
How to Source This Part
- Add to Cart — place your order directly on Konmask.com with secure checkout
- Request a Quote — email [email protected] for volume pricing, lead time confirmation, or expedited shipping
- WhatsApp / Phone — reach our technical sales team at +0086 19859288691 for urgent plant-shutdown requirements
- Global Shipping — DHL / FedEx express available; export documentation (CO, packing list, commercial invoice) provided
Application-Specific FAQ
Q: Is the PR9268/617-100-CNS a direct replacement for Bently Nevada 330101 probes?
A: Yes. The PR9268 series uses the same 8 mV/µm sensitivity and −24 VDC supply, making it electrically compatible with Bently Nevada 3300 and 3500 monitoring systems without driver reconfiguration.
Q: What does “617-100” in the part number mean?
A: “617” denotes the probe body diameter/style code, and “100” indicates the integral cable length of 100 inches (≈ 2.54 m). Always verify cable length matches your probe-to-driver distance before ordering.
Q: Can this sensor be used in hazardous (Ex) areas?
A: The standard CNS variant is not ATEX-rated. For Zone 1/Zone 2 installations, request the intrinsically safe variant or use an approved Zener barrier in the signal loop.
Q: What is the typical lead time?
A: In-stock units ship within 1–3 business days. For out-of-stock situations, typical lead time is 2–4 weeks. Contact us for real-time availability.
Q: Do you provide calibration certificates?
A: Yes, traceable calibration documentation is available upon request at time of order.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
