Yokogawa ADV551-P50 / ADV551-P00 Analog Output Module | Replacement, Equivalent & Selection Guide
The Yokogawa ADV551-P50 and ADV551-P00 are high-precision analog output modules designed for the Yokogawa CENTUM VP and CENTUM CS 3000 distributed control systems (DCS). These modules deliver reliable 4–20 mA current output signals for process control in demanding industrial environments including oil & gas, petrochemical, power generation, and pharmaceutical manufacturing.
At Konmask.com, we specialize in sourcing genuine, tested, and certified Yokogawa automation components — helping engineers and procurement teams find the right module or a verified equivalent without downtime.
Technical Specifications
- Model Numbers: ADV551-P50 / ADV551-P00
- Manufacturer: Yokogawa Electric Corporation
- Series: CENTUM VP / CENTUM CS 3000
- Module Type: Analog Output (AO)
- Output Signal: 4–20 mA DC (current output)
- Output Channels: 16 channels (isolated)
- Output Resolution: 16-bit D/A conversion
- Accuracy: ±0.1% of full scale
- Load Resistance: 0–750 Ω
- Power Supply: 24 V DC (supplied via backplane)
- Operating Temperature: 0°C to 55°C
- Storage Temperature: −25°C to 70°C
- Humidity: 5% to 95% RH (non-condensing)
- Mounting: DCS I/O nest (CENTUM VP compatible)
- Country of Origin: Japan
- Weight: Approx. 630 g
- Certifications: CE, UL, FM (intrinsically safe variants)
Suffix Differences: ADV551-P50 includes HART communication pass-through; ADV551-P00 is the standard non-HART variant. Confirm your system requirements before ordering.
Compatible Replacement & Equivalent Models
If the ADV551-P50 or ADV551-P00 is unavailable or you are evaluating alternatives, the following models offer functional compatibility or direct replacement potential:
- Yokogawa ADV551-P10 — Same channel count, different suffix; verify HART support requirements
- Yokogawa ADV551-P20 — Alternate variant; confirm firmware and backplane compatibility
- Yokogawa AAV141-S — Legacy CENTUM CS 3000 AO module; suitable for older system revisions
- Yokogawa AAV542-S — 8-channel AO module; use when fewer channels are required
- Yokogawa ADV151-P50 — Analog input counterpart; useful for mixed I/O nest planning
Note: Always verify firmware version, nest slot compatibility, and system software revision before substituting modules. Contact Konmask.com for a free compatibility check.
Why Choose the Original Model
- Guaranteed Compatibility: Factory-matched to CENTUM VP / CS 3000 I/O nests — no firmware conflicts
- HART Pass-Through (P50): Enables device diagnostics and calibration without additional hardware
- 16-Bit Resolution: Superior output precision for tight process control loops
- Channel Isolation: Prevents ground loops and cross-channel interference in multi-loop systems
- Long-Term Support: Yokogawa provides extended lifecycle support and spare parts availability
- Proven Reliability: Deployed in thousands of CENTUM VP installations worldwide across critical industries
Typical Applications
- Oil & gas refinery process control (valve positioner output, flow control)
- Petrochemical plant DCS I/O expansion
- Power generation turbine and boiler control systems
- Pharmaceutical batch process automation
- Pulp & paper mill process loops
- Water treatment and municipal utility SCADA integration
- Chemical reactor temperature and pressure output control
System Compatibility
- Primary Platform: Yokogawa CENTUM VP (all revisions)
- Legacy Platform: Yokogawa CENTUM CS 3000 (R3 and above)
- I/O Nest: ANB10D, ANB10S, and compatible CENTUM VP I/O nests
- Engineering Tool: Yokogawa CENTUM VP Builder / CS 3000 Builder
- Communication: Vnet/IP (CENTUM VP) / Ethernet (CS 3000)
- Not Compatible With: STARDOM, ProSafe-RS (standalone), or third-party DCS platforms without gateway
Selection Guide
Use this guide to select the correct ADV551 variant for your application:
- Need HART device communication? → Select ADV551-P50
- Standard 4–20 mA output only, no HART? → Select ADV551-P00
- Replacing a legacy CS 3000 AO module? → Verify nest type and confirm ADV551 series compatibility with your system revision
- Need fewer than 16 channels? → Consider AAV542-S (8-channel) to reduce cost
- Mixed I/O nest? → Pair with ADV151-P50 (AI) for a balanced I/O configuration
- Unsure? → Send your system model number and I/O nest drawing to support@konmask.com for a free selection review
Quality Assurance & Sourcing
- Source: Genuine Yokogawa OEM modules — no counterfeit or refurbished-as-new stock
- Testing: Each unit undergoes functional power-on and output signal verification before shipment
- Packaging: Anti-static ESD packaging with original Yokogawa labeling preserved
- Documentation: Certificate of conformance and test report available on request
- Warranty: 12-month warranty against manufacturing defects
- Traceability: Full serial number and batch traceability maintained
How to Order
- Confirm your model suffix: ADV551-P50 (HART) or ADV551-P00 (standard)
- Verify your CENTUM VP / CS 3000 system revision and I/O nest model
- Add to cart or contact us for bulk pricing and lead time
- Provide your PO number, shipping address, and any special documentation requirements
- Receive order confirmation with tracking within 1 business day
📧 support@konmask.com | 📞 +0086 19859288691 | 🌐 konmask.com
Replacement & Compatibility FAQ
Q: Can ADV551-P00 replace ADV551-P50 directly?
A: Functionally yes for standard 4–20 mA output. However, P50 includes HART pass-through — if your field devices use HART for diagnostics, you must use P50.
Q: Is ADV551-P50 compatible with CENTUM CS 3000?
A: Yes, with CS 3000 R3 and above. Confirm I/O nest model and system software version before installation.
Q: What is the lead time for ADV551-P50?
A: In-stock units ship within 3–5 business days. Out-of-stock items typically have a 4–8 week lead time. Contact us for current availability.
Q: Do you provide installation support?
A: We provide technical documentation and remote guidance. On-site commissioning support can be arranged through our partner network.
Q: Can I return a module if it’s incompatible?
A: Yes. We offer a 30-day return policy for unused, unopened modules. Contact support before returning.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
