Turbine & Rotating Machinery Vibration Monitoring Solution — Bently Nevada 21000-16-05-15-084-03-02 | 21000 Series
Where This Product Is Used
The Bently Nevada 21000-16-05-15-084-03-02 proximity transducer system is purpose-built for continuous, real-time vibration and position monitoring of rotating machinery in mission-critical industrial environments. Typical deployment sites include:
- Steam & Gas Turbines — shaft radial vibration, thrust position, and differential expansion monitoring in power generation plants
- Centrifugal & Axial Compressors — rotor dynamic monitoring in oil & gas upstream/downstream facilities and petrochemical plants
- Pumps & Blowers — bearing journal orbit analysis in water treatment, chemical processing, and HVAC systems
- Gearboxes & Expanders — high-speed shaft monitoring in LNG liquefaction trains and refinery process units
- Marine Propulsion Systems — shaft alignment and vibration surveillance on vessels and offshore platforms
Technical Specifications
| Part Number | 21000-16-05-15-084-03-02 |
| Series | Bently Nevada 21000 Proximity Transducer System |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Transducer Type | Eddy-Current Proximity Transducer |
| Probe Tip Diameter | 16 mm |
| Cable Length | 5 m (standard) |
| Extension Cable Length | 15 m |
| Driver/Oscillator | Proximitor® Sensor (3300 XL / 3500 compatible) |
| Output Signal | −24 VDC nominal bias; linear range −2 VDC to −18 VDC |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Frequency Response | DC to 10,000 Hz |
| Target Material | AISI 4140 steel (standard); other alloys available |
| Operating Temperature | −35°C to +177°C (probe); −35°C to +66°C (driver) |
| Weight | 1,380 g (system) |
| Connector Type | 084 series (per part number suffix) |
| Armored Cable | 03 (stainless steel armor) |
| Mounting Thread | 02 (per suffix) |
Why Engineers Specify This Model
- Proven API 670 Compliance — meets the industry standard for machinery protection systems, accepted by EPC contractors and end-users worldwide
- Plug-and-Play with 3300 & 3500 Racks — direct replacement for existing Bently Nevada monitoring rack installations without rewiring
- Stainless Steel Armored Cable — the -03 armor suffix provides superior mechanical protection in high-vibration, high-temperature, and chemically aggressive environments
- Extended 15 m Extension Cable — allows driver/Proximitor® placement in safe areas away from hazardous zones, simplifying ATEX/IECEx compliance
- High-Frequency Bandwidth (DC–10 kHz) — captures sub-synchronous instabilities, oil whirl, and blade-pass frequencies critical for early fault detection
- Long Field Track Record — the 21000 series has accumulated decades of runtime in refineries, power plants, and LNG facilities globally
Complete System Bill of Materials
A fully functional proximity measurement loop using this part typically includes:
- 21000-16-05-15-084-03-02 — Probe + Integral Cable + Extension Cable (this item)
- Bently Nevada 3300 XL Proximitor® Sensor (e.g., 330180-X1-05) — driver/oscillator module
- Bently Nevada 3500/40M or 3500/42M — Proximitor®/Seismic Monitor rack card
- Bently Nevada 3500/20 — rack power supply module
- Bently Nevada 3500/22M — transient data interface (optional, for waveform capture)
- Mounting bracket / probe holder (customer-supplied, per shaft clearance)
- Shielded twisted-pair signal cable (for Proximitor® to rack wiring)
Compliance & Industry Standards
- API 670 — Machinery Protection Systems (5th Edition)
- API 670 Annex D — Proximity Transducer System performance verification
- IEC 61511 — Functional Safety (SIL-rated loop configurations)
- ATEX / IECEx — compatible with certified Proximitor® barriers for Zone 1/Zone 2 hazardous area installations
- ISO 10816 / ISO 20816 — mechanical vibration evaluation of machinery
- CE Marking — applicable to EU-destined system configurations
Quality Assurance & Sourcing
Konmask.com specializes in sourcing genuine and reconditioned industrial automation components for global B2B buyers. Every unit of the 21000-16-05-15-084-03-02 offered through our platform undergoes:
- Visual & Dimensional Inspection — probe tip, cable armor, and connector integrity verified against OEM drawings
- Functional Verification — bias voltage and sensitivity checked against Bently Nevada factory specifications where test equipment is available
- Traceability Documentation — serial number, calibration records, and sourcing chain documentation provided on request
- Secure Packaging — ESD-safe packaging with foam inserts; probe tip protected during transit
How to Source This Part
To place an order or request a quotation for the Bently Nevada 21000-16-05-15-084-03-02:
- Online: Add to cart directly on this page — we accept T/T wire transfer, PayPal, and major credit cards
- Email RFQ: Send your PO or RFQ to support@konmask.com with quantity, required delivery date, and destination port
- Phone / WhatsApp: +0086 19859288691 — available Monday–Saturday, 09:00–18:00 CST
- Lead Time: In-stock units ship within 1–3 business days; sourced units typically 7–21 business days depending on origin
- Export: We ship DDP, DAP, EXW, and FOB Xiamen/Shenzhen — Incoterms negotiable for large orders
Application-Specific FAQ
Q: Is the 21000-16-05-15-084-03-02 compatible with the Bently Nevada 3500 rack?
A: Yes. The 21000 series probe and extension cable connect to a 330180 or equivalent Proximitor® sensor, which interfaces directly with 3500/40M and 3500/42M monitor cards.
Q: What is the linear measurement range of this transducer?
A: The standard linear range is approximately 0.25 mm to 2.25 mm (10 mil to 90 mil) gap, corresponding to an output of approximately −2 VDC to −18 VDC at 7.87 V/mm sensitivity.
Q: Can this probe be used on non-steel target materials such as titanium or Inconel?
A: The standard calibration is for AISI 4140 steel. For non-standard target materials, a target material correction factor (TMCF) must be applied. Contact us for application-specific calibration support.
Q: Is this part suitable for hazardous area (ATEX Zone 1) installations?
A: The probe itself is passive and intrinsically safe when used with a certified Zener barrier or galvanic isolator. The Proximitor® sensor must be located in a safe area or use an ATEX-certified housing. Consult your safety engineer for loop certification.
Q: Do you provide a warranty or return policy?
A: Yes. We offer a 90-day functional warranty on all verified units. Units that fail functional testing upon receipt may be returned within 14 days for full refund or replacement. See our store policy for details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






