Turbine & Rotating Machinery Vibration Solution — Bently Nevada 21000-16-05-15-102-03-02 | 21000 Series
Where This Product Is Used
The Bently Nevada 21000-16-05-15-102-03-02 is a proximity transducer system engineered for continuous, non-contact vibration and position measurement on critical rotating machinery. It is deployed across the following industrial environments:
- Gas & Steam Turbines — shaft radial vibration and eccentricity monitoring per API 670
- Centrifugal & Axial Compressors — real-time rotor displacement in petrochemical and LNG plants
- Pumps & Fans — bearing journal orbit analysis in power generation and water treatment
- Gearboxes — gear mesh frequency and shaft runout detection
- Marine Propulsion Systems — shaft alignment and vibration trending on vessel drive trains
- Paper & Steel Mills — roll and spindle monitoring in continuous process lines
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 21000-16-05-15-102-03-02 |
| Series | Bently Nevada 21000 Proximity Transducer System |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Transducer Type | Eddy-Current Proximity Transducer |
| Probe Tip Diameter | 16 mm |
| Cable Length | 5 m (standard) |
| Extension Cable Length | 15 m |
| Driver/Oscillator | Included (3300 XL / 3500 rack compatible) |
| Output Signal | –24 VDC nominal, linear voltage proportional to gap |
| Measurement Range | 0.25 mm – 2.25 mm (linear range) |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Operating Temperature | –35°C to +177°C (probe); –35°C to +85°C (driver) |
| Target Material | AISI 4140 steel (standard); other alloys available |
| Connector Type | Integral armored cable with MIL-spec connector |
| Weight | 1,440 g (system) |
| Compliance | API 670, CE, RoHS |
Why Engineers Specify This Model
- API 670 Compliant — meets the machinery protection standard required by EPC contractors and end-users in oil & gas
- 16 mm Probe Tip — larger sensing face delivers superior signal-to-noise ratio on large-diameter shafts (>100 mm)
- 5 m + 15 m Cable Configuration — pre-matched probe-extension-driver set eliminates field calibration errors
- Direct 3500 Rack Compatibility — plug-and-play integration with Bently Nevada 3500 Series monitoring racks
- Armored Cable Construction — withstands high-vibration, high-temperature, and chemically aggressive environments
- Traceable Calibration — each system ships with factory calibration data for audit and commissioning records
Complete System Bill of Materials
A complete proximity transducer installation typically includes:
- Proximity Probe: 21000-16-05-15-102-03-02 (this item)
- Extension Cable: matched 15 m armored extension (included in this part number configuration)
- Oscillator/Driver: integrated driver module (included)
- Mounting Hardware: Bently Nevada probe holder / bracket (sold separately)
- Monitoring Rack: Bently Nevada 3500 Series or 3300 XL rack
- I/O Module: 3500/42M or 3500/40M position monitor card
- Junction Box: field-mount stainless enclosure (site-supplied)
Compliance & Industry Standards
- API 670 — Machinery Protection Systems (5th Edition)
- IEC 61511 — Functional Safety for SIS applications
- ISO 10816 / ISO 20816 — Mechanical vibration evaluation
- CE Marking — EU Machinery Directive 2006/42/EC
- RoHS Compliant — Restriction of Hazardous Substances
- ATEX / IECEx — consult factory for hazardous area certified variants
Quality Assurance & Sourcing
Konmask.com sources the Bently Nevada 21000-16-05-15-102-03-02 through verified industrial automation distributors and authorized surplus channels. Every unit undergoes:
- Visual inspection and part number verification against Bently Nevada documentation
- Functional continuity and impedance check prior to dispatch
- Secure anti-static packaging with tamper-evident sealing
- Photographic documentation available on request
Warranty: 12-month replacement warranty against manufacturing defects. Certificates of conformance available upon request.
How to Source This Part
Ready to order or need a formal quotation for your procurement team?
- Request a Quote: Email support@konmask.com with your required quantity and delivery timeline
- Phone / WhatsApp: +0086 19859288691 (Mon–Sat, 09:00–18:00 CST)
- Lead Time: In-stock units ship within 3–5 business days; ex-stock orders within 2–4 weeks
- Payment: T/T (Wire Transfer), PayPal, and major credit cards accepted
- Export: DDP/DAP worldwide; HS Code 9031.80 (precision instruments)
Application-Specific FAQ
Q: Is the 21000-16-05-15-102-03-02 compatible with the Bently Nevada 3500/42M monitor?
A: Yes. This transducer system is fully compatible with the 3500/42M Vibration Monitor and all standard 3500 rack configurations.
Q: Can this probe be used on stainless steel shafts?
A: The standard calibration is optimized for AISI 4140 steel. For stainless steel or Inconel shafts, a target material correction factor must be applied. Contact us for application-specific calibration data.
Q: What is the difference between the 21000 and 3300 XL series?
A: The 21000 series uses the same eddy-current principle but features a larger 16 mm probe tip and is optimized for heavy-duty turbomachinery with larger shaft diameters. The 3300 XL is the standard 8 mm platform for general rotating equipment.
Q: Do you provide ATEX-certified versions?
A: ATEX/IECEx variants are available for Zone 1/Zone 2 hazardous areas. Please specify your area classification when requesting a quote.
Q: Can I get a calibration certificate with my order?
A: Yes. Factory calibration records and certificates of conformance are available upon request at no additional charge.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






