Bently Nevada 21000-16-10-15-075-03-02 Proximity Probe Housing Assemblies | Replacement, Equivalent & Selection Guide
The Bently Nevada 21000-16-10-15-075-03-02 is a precision proximity probe housing assembly designed for continuous vibration and position monitoring in rotating machinery. As an authorized sourcing partner, Konmask.com supplies both original and verified-equivalent units to minimize downtime and simplify procurement.
Technical Specifications
- Part Number: 21000-16-10-15-075-03-02
- Brand: Bently Nevada (Baker Hughes)
- Series: 21000 Proximity Probe Series
- Type: Proximity Probe Housing Assembly
- Probe Diameter: 16 mm
- Cable Length: 1.0 m (extension cable)
- Gap Range: 0.25 – 2.25 mm (typical)
- Output: -18 VDC nominal (Bently Nevada standard)
- Temperature Range: -35°C to +177°C (probe tip)
- Connector: Standard Bently Nevada coaxial
- Weight: ~1,400 g (assembly)
- Compliance: API 670, CE
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 21000-16-10-10-075-03-02 – shorter cable variant
- Bently Nevada 21000-16-10-20-075-03-02 – longer cable variant
- Bently Nevada 330101-00-06-10-02-00 – 3300 XL 8mm probe (functional equivalent for many applications)
- Epro PR6423/010-040 – third-party equivalent, 16 mm eddy-current probe
- Emerson 21000 Series compatible assemblies
Contact Konmask.com for cross-reference verification before ordering a replacement.
Why Choose the Original Model
- Factory-calibrated gap voltage curve ensures measurement accuracy per API 670
- Full traceability and OEM documentation available
- Guaranteed compatibility with Bently Nevada 3500 Series monitoring racks
- Minimizes recalibration effort vs. third-party alternatives
- Long-term availability through authorized distribution channels
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Compressor radial and axial position measurement
- Pump and motor bearing displacement sensing
- Gearbox and fan shaft eccentricity detection
- Critical rotating machinery in oil & gas, power generation, and petrochemical plants
System Compatibility
- Monitors: Bently Nevada 3500 Series, 3300 Series racks
- Drivers/Oscillators: Bently Nevada 3300 XL, 990 Series
- DCS Integration: Compatible with Emerson DeltaV, Honeywell Experion, ABB 800xA via 4–20 mA or FOUNDATION Fieldbus output from monitor rack
- PLC Integration: Signal output from monitor rack interfaces with Siemens S7, Allen-Bradley ControlLogix, Mitsubishi MELSEC via analog input modules
Selection Guide
Use the following parameters to confirm the correct part number for your application:
- Probe diameter: 8 mm, 11 mm, or 16 mm — select based on target gap and installation bore
- Extension cable length: Encoded in part number (e.g., -10- = 1.0 m, -15- = 1.5 m, -20- = 2.0 m)
- Temperature rating: Standard (-35°C to +177°C) vs. high-temp variants
- Connector type: Verify coaxial connector compatibility with existing cabling
- Sensitivity: 7.87 V/mm standard; confirm with your monitor rack input specification
Not sure which model fits your system? Contact our selection team with your rack model and installation drawing.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or OEM-certified supply chains
- Incoming inspection: visual, dimensional, and electrical verification
- Original packaging and documentation preserved where available
- Traceability records available on request
- Warranty: 12 months from date of shipment
How to Order
- Add to cart directly on this page, or
- Email support@konmask.com with your PO or inquiry
- Provide your application details for cross-reference confirmation if needed
- Lead time: typically 3–7 business days for in-stock units; contact us for urgent requirements
Replacement & Compatibility FAQ
Q: Can I use a 3300 XL 8mm probe as a direct replacement?
A: Only if your monitor rack and installation bore support 8 mm probes. Electrical output is compatible, but mechanical fit differs.
Q: Does Konmask.com provide calibration certificates?
A: Yes, calibration documentation is available for OEM units. Contact us to confirm availability for your specific lot.
Q: What is the lead time for the 21000-16-10-15-075-03-02?
A: Typically 3–7 business days for stock units. Expedited options available — email us for details.
Q: Can this probe be used with non-Bently Nevada monitors?
A: Yes, with appropriate signal conditioning. The eddy-current output is industry-standard; verify input impedance and sensitivity requirements of your monitor.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






