Bently Nevada 330102-02-12-50-01-00 – Eddy Current Proximity Transducer System | 3300 XL Series
Engineering Background
The Bently Nevada 3300 XL Series represents the industry benchmark for non-contact shaft vibration and position measurement in rotating machinery. Engineered for continuous operation in harsh industrial environments, this eddy-current proximity transducer system delivers the signal fidelity and long-term stability demanded by turbomachinery OEMs, petrochemical plants, and power generation facilities worldwide.
Product Positioning
Part number 330102-02-12-50-01-00 is a complete proximity transducer system comprising a 5 mm tip-diameter probe, 2 m extension cable, and Proximitor® sensor. It is fully compatible with Bently Nevada 3500 and 3300 Series monitoring racks and is the preferred replacement or spare for critical machinery protection systems where API 670 compliance is required.
Complete Technical Specifications
| Part Number | 330102-02-12-50-01-00 |
| Brand / Manufacturer | Bently Nevada (Baker Hughes) |
| Series / Platform | 3300 XL Proximity Transducer System |
| Probe Tip Diameter | 5 mm (0.197 in) |
| Probe Cable Length | 2 m (6.56 ft) integral cable |
| Extension Cable Length | 5 m (16.4 ft) — total system range 7 m |
| Linear Range | 0.25 – 2.25 mm (10 – 90 mil) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Supply Voltage | -24 VDC (nominal) |
| Frequency Response | DC – 10,000 Hz (–3 dB) |
| Target Material | AISI 4140 steel (standard); other alloys per calibration |
| Operating Temperature | -35 °C to +177 °C (probe); -35 °C to +85 °C (Proximitor) |
| Connector Type | 3-pin MIL-C-5015 (Proximitor output) |
| Ingress Protection | IP67 (probe assembly) |
| Compliance | API 670, CE, ATEX (consult datasheet for zone ratings) |
| Country of Origin | United States |
| Weight (unit) | ~40 g |
Proven Application Environments
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal compressor rotor position and thrust measurement
- Pump and motor bearing housing displacement
- Gearbox differential expansion and eccentricity measurement
- API 670-compliant machinery protection systems
- Petrochemical, LNG, power generation, and offshore platforms
Engineering Advantages
- Non-contact measurement — zero mechanical wear, suitable for continuous 24/7 operation
- High linearity — ±0.5% full-scale error over calibrated range ensures accurate alarm and trip setpoints
- Wide temperature range — probe rated to +177 °C for hot-section turbine installations
- System-matched calibration — probe, extension cable, and Proximitor® shipped as a calibrated set; do not mix components between systems
- Drop-in compatibility — direct replacement for existing 3300 XL installations without rack reconfiguration
- Robust EMI immunity — shielded coaxial cable construction minimises interference in electrically noisy plant environments
System Architecture & Signal Flow
The 330102-02-12-50-01-00 system operates on the eddy-current principle. The Proximitor® sensor drives a high-frequency oscillator signal through the coaxial cable to the probe tip. When a conductive target (shaft) enters the probe’s electromagnetic field, eddy currents are induced, loading the oscillator and producing a DC-proportional output voltage. Signal flow:
Proximitor® Sensor → Extension Cable (5 m) → Integral Probe Cable (2 m) → Probe Tip → Target Shaft → DC Voltage Output → Monitoring Rack (3500/3300 Series)
Output polarity: negative voltage increases as gap decreases (standard Bently Nevada convention).
Sourcing & Quality Verification
- Units sourced from authorised distributors and verified surplus channels with full traceability documentation
- Each system inspected for physical integrity, connector condition, and cable continuity prior to dispatch
- Original Bently Nevada / Baker Hughes labelling and part-number markings verified
- Calibration certificates available upon request for new-production units
- Counterfeit-risk mitigation: all units cross-referenced against Baker Hughes authorised part databases
Procurement Process
- Confirm part number 330102-02-12-50-01-00 matches your existing system’s probe, cable, and Proximitor® configuration
- Verify target material and gap range against your machinery OEM specification
- Place order — standard lead time 1–3 business days for in-stock units; expedited available
- Receive unit with inspection report and packing list
- Commission using Bently Nevada gap voltage procedure per system TDM
For volume orders (>5 units), OEM projects, or EPC procurement, contact our technical sales team for pricing and availability.
Technical FAQ
Q: Can I mix probe and Proximitor® from different 3300 XL part numbers?
A: No. Each system is factory-calibrated as a matched set. Mixing components will invalidate the scale factor and may cause false alarms or missed trips.
Q: Is this compatible with the Bently Nevada 3500 rack?
A: Yes. The 3300 XL system is fully compatible with 3500 Series monitor cards configured for 3300 XL inputs.
Q: What is the maximum shaft speed this system can measure?
A: The 10,000 Hz frequency response supports shaft speeds up to approximately 600,000 RPM for 1× vibration; practical limits depend on monitor card bandwidth.
Q: Do you provide ATEX/IECEx certification documentation?
A: Yes, upon request. Please specify the hazardous area classification required when ordering.
Q: What is the lead time for out-of-stock units?
A: Typically 2–4 weeks for factory-new units. Verified surplus units ship within 1–3 business days.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






