Bently Nevada 330103-00-02-05-02-CN – 8mm Proximity Transducer System | 3300 XL Series Platform
Engineering Background
The Bently Nevada 3300 XL Proximity Transducer System is the industry benchmark for non-contact, continuous shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system delivers the measurement accuracy and long-term reliability demanded by petrochemical, power generation, and heavy industrial facilities worldwide.
Product Positioning
The 330103-00-02-05-02-CN is an 8mm eddy-current proximity transducer configured for standard 5-metre extension cable and -CN (China) regional compliance. It is the preferred choice for procurement engineers specifying vibration monitoring on compressors, turbines, pumps, and gearboxes where continuous uptime is non-negotiable.
Complete Technical Specifications
- Part Number: 330103-00-02-05-02-CN
- Series / Platform: Bently Nevada 3300 XL
- Transducer Type: Eddy-Current Proximity Transducer (Non-contact)
- Probe Tip Diameter: 8 mm
- Extension Cable Length: 5 m (standard)
- Linear Range: 0.25 mm – 2.25 mm (10 mil – 90 mil)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC – 10,000 Hz (–3 dB)
- Supply Voltage: –24 VDC (nominal)
- Temperature Range (Operating): –35 °C to +121 °C (probe); –35 °C to +85 °C (driver)
- Ingress Protection: IP67 (probe assembly)
- Connector: Standard BNC / Bently Nevada proprietary driver interface
- Compliance: API 670, CE, RoHS; -CN regional marking
- Weight: Approx. 40 g (probe assembly)
- Compatible Driver / Oscillator: Bently Nevada 3300 XL Driver (330180 series)
Proven Application Environments
- Centrifugal & reciprocating compressors (oil & gas upstream / midstream)
- Steam and gas turbines in power generation plants
- Boiler feed pumps and large process pumps
- Gearboxes and expanders in refinery service
- Rotating machinery subject to API 670 machinery protection requirements
- Continuous process industries requiring 24/7 vibration surveillance
Engineering Advantages
- Non-contact measurement eliminates mechanical wear and extends sensor service life beyond 10 years in typical installations
- Wide frequency bandwidth (DC – 10 kHz) captures both slow-roll runout and high-frequency sub-synchronous instabilities
- API 670 compliance satisfies machinery protection specifications for critical rotating equipment without additional engineering waivers
- Matched system calibration — probe, extension cable, and driver are factory-calibrated as a system, ensuring traceability and eliminating field calibration errors
- -CN regional variant meets Chinese national standards and simplifies customs clearance for domestic installations
- Robust IP67 probe withstands high-pressure wash-down, oil mist, and aggressive process environments
System Architecture & Signal Flow
The 330103-00-02-05-02-CN operates as part of a three-component matched system:
- Probe (330103-00-02-05-02-CN) — 8 mm eddy-current sensing element, threaded body for rigid mounting in proximity probe holder
- Extension Cable (included, 5 m) — low-loss coaxial cable with armoured jacket; connects probe to driver/oscillator
- Driver / Oscillator (330180 series, sold separately) — conditions the raw eddy-current signal into a calibrated DC voltage output (–24 VDC supply, 0 V to –18 V output range) for direct input to Bently Nevada 3500 / 3300 monitoring racks or third-party DCS/PLC systems
Output signal is a linear DC voltage proportional to gap distance, directly compatible with 4–20 mA transmitters via signal conditioners and with Modbus/HART-enabled monitoring systems.
Sourcing & Quality Verification
- All units sourced through authorised distribution channels with full OEM traceability
- Each shipment includes original manufacturer documentation and calibration certificate where applicable
- Batch and date-code verification available upon request prior to order confirmation
- Konmask.com maintains a dedicated quality inspection process: visual inspection, packaging integrity check, and label/serial verification before dispatch
- Counterfeit-risk mitigation: we do not source from grey-market or unverified secondary suppliers
Procurement Process
- Confirm part number — verify 330103-00-02-05-02-CN matches your BOM and system driver compatibility (330180 series)
- Request a quote — contact support@konmask.com with quantity, required delivery date, and destination port
- Lead time — in-stock units ship within 3–5 business days; ex-stock confirmation provided at order placement
- Export documentation — commercial invoice, packing list, and CO (Certificate of Origin) provided for all international shipments
- Payment terms — T/T, L/C, and trade assurance options available; contact us for volume pricing
Technical FAQ
Q: Is the 330103-00-02-05-02-CN interchangeable with the 330103-00-02-05-02-00?
A: The -CN suffix denotes the China regional variant with localised compliance markings. Electrically and mechanically, the units are equivalent; however, always confirm with your site’s instrumentation engineer before substitution on a certified installation.
Q: Can this transducer be used with third-party monitoring systems?
A: Yes. The DC voltage output (0 V to –18 V) is compatible with most DCS and PLC analogue input cards. A signal conditioner may be required to convert to 4–20 mA. Consult your system integrator for interface details.
Q: What is the recommended replacement interval?
A: Bently Nevada recommends functional verification every 12 months as part of a machinery protection system proof-test. Physical replacement is typically driven by cable damage or probe tip wear rather than a fixed interval.
Q: Do you provide calibration certificates?
A: Yes. Factory calibration documentation is available for units sourced through our verified supply chain. Request at time of order.
Q: What is the minimum order quantity?
A: No minimum order quantity. Single units and bulk orders are both accommodated.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






