Rotating Machinery Vibration Monitoring Solution – Bently Nevada 330103-00-19-10-01-00 | 3300 XL Series
The Bently Nevada 330103-00-19-10-01-00 is a precision eddy-current proximity transducer system engineered for continuous, non-contact measurement of shaft vibration, axial position, and differential expansion in critical rotating machinery. Part of the industry-standard 3300 XL Series, this system is the go-to choice for plant engineers who cannot afford unplanned downtime.
Where This Product Is Used
This transducer system is deployed across the most demanding industrial environments where shaft dynamics must be monitored 24/7:
- Steam & Gas Turbines – Continuous radial vibration and thrust position monitoring on HP/LP turbine shafts
- Centrifugal Compressors – Shaft orbit and eccentricity measurement in petrochemical and LNG plants
- Pumps & Fans – Early-warning vibration detection on boiler feed pumps and induced-draft fans
- Gearboxes – Gear mesh frequency monitoring and bearing journal displacement
- Hydro Turbines – Axial thrust and radial vibration on vertical-shaft generators
- Marine Propulsion – Shaft alignment verification and vibration trending on vessel drive trains
- Paper & Steel Mills – Roll and spindle runout measurement in continuous process lines
Technical Specifications
- Part Number: 330103-00-19-10-01-00
- Series: Bently Nevada 3300 XL Proximity Transducer System
- Probe Cable Length: 19 in (0.5 m) integral cable
- Extension Cable: 10 m (included in system)
- Tip Diameter: 8 mm standard
- Measurement Range: 0–90 mil pp (0–2.286 mm pp) linear range
- Sensitivity: 200 mV/mil (7.87 V/mm)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Operating Temperature: –35 °C to +177 °C (probe); –35 °C to +85 °C (driver)
- Supply Voltage: –24 VDC (nominal)
- Output: –1 VDC to –21 VDC (linear range)
- Target Material: AISI 4140 steel (standard); other alloys available
- Ingress Protection: IP67 (probe assembly)
- Approvals: CE, FM, CSA, ATEX (consult datasheet for zone ratings)
- Weight: ~40 g (probe assembly)
Why Engineers Specify This Model
- Proven 3300 XL Platform – Backward-compatible with existing Bently Nevada monitor racks (3300, 3500 series)
- Non-Contact Measurement – Zero mechanical wear; ideal for high-speed shafts exceeding 100,000 RPM
- High Linearity – ±1% linearity over full measurement range ensures accurate alarm setpoints
- Integral Cable Design – Eliminates connector failure points in high-vibration zones
- Wide Temperature Range – Suitable for hot-section turbine pedestals and cryogenic compressor applications
- API 670 Compliant – Meets the machinery protection standard required by most EPC contractors
Complete System Bill of Materials
- 330103-00-19-10-01-00 Proximity Probe (8 mm, 0.5 m cable) × 1
- 330130-045-00-00 Extension Cable (10 m) × 1
- 330180-X1-05 Proximitor® Driver/Oscillator × 1
- Mounting hardware (probe holder, lock nut, jam nut) × 1 set
- Calibration certificate × 1
Note: Monitor rack (3500/40M or equivalent) sold separately. Contact Konmask for complete system quotations.
Compliance & Industry Standards
- API 670 – Machinery Protection Systems (5th Edition)
- ISO 10816 / ISO 20816 – Mechanical vibration evaluation
- IEC 60079 – Equipment for explosive atmospheres (ATEX-rated variants)
- CE Marking – EU Machinery Directive compliance
- FM & CSA – North American hazardous location approvals
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified OEM-surplus channels
- Each system inspected and function-tested prior to shipment
- Calibration traceability documentation available on request
- Genuine Bently Nevada (Baker Hughes) components – no third-party substitutes
- Secure anti-static packaging with humidity indicators for long-haul shipping
How to Source This Part
- Click Add to Cart or use the Request a Quote button for volume orders
- Email support@konmask.com with your PO number and delivery timeline
- Provide your target material (shaft alloy) if non-standard calibration is required
- Lead time: typically 3–7 business days for in-stock units; 2–4 weeks for special configurations
- Export documentation (CO, packing list, commercial invoice) provided for international orders
Application-Specific FAQ
Q: Is 330103-00-19-10-01-00 compatible with the Bently Nevada 3500/40M monitor?
A: Yes. The 3300 XL probe system is fully compatible with the 3500 series monitor racks when used with the appropriate Proximitor driver.
Q: What shaft material is this probe calibrated for?
A: Standard calibration is for AISI 4140 steel. If your shaft is stainless, titanium, or another alloy, a recalibration factor or custom-calibrated unit is required — contact us before ordering.
Q: Can this system be used in a hazardous (classified) area?
A: Yes, with the appropriate ATEX/FM-rated Proximitor driver. Confirm the area classification (Zone 1/2 or Division 1/2) and we will supply the correct driver variant.
Q: What is the difference between the 330103 and 330105 probe series?
A: The 330103 uses an 8 mm tip diameter; the 330105 uses a 5 mm tip for tighter installation clearances. Both share the same 3300 XL signal conditioning platform.
Q: Do you provide a calibration certificate?
A: Yes. A factory or third-party calibration certificate is included with every shipment. NIST-traceable calibration is available on request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






