Genuine Bently Nevada 330103-00-07-10-01-00 Proximity Transducer System | 3300 XL Series – Verified Source
The Bently Nevada 330103-00-07-10-01-00 is a high-precision proximity transducer system engineered for continuous shaft vibration and position monitoring in rotating machinery. Sourced through verified industrial supply channels, every unit sold by Konmask.com undergoes a rigorous 4-step quality verification process before dispatch.
Technical Specifications
- Part Number / SKU: 330103-00-07-10-01-00
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL Proximity Transducer System
- Probe Length: 7 mm tip diameter
- Cable Length: 1.0 m (standard)
- Extension Cable: 5.0 m
- Frequency Range: 0 – 10,000 Hz
- Output Sensitivity: 200 mV/mil (7.87 V/mm)
- Operating Temperature: -35°C to +177°C (probe); -35°C to +85°C (driver)
- Supply Voltage: -24 VDC (nominal)
- Gap Range: 0.25 mm – 2.26 mm (10 – 89 mil)
- Connector Type: Standard BNC / integral cable
- Approvals: CE, ATEX, FM, CSA (refer to datasheet for specific suffix)
Our 4-Step Quality Verification Process
- Source Authentication — All units are procured from authorized distributors or verified OEM surplus channels. Supplier documentation is retained on file.
- Physical Inspection — Each unit is inspected for label integrity, housing condition, connector quality, and absence of counterfeit indicators.
- Functional Bench Test — Where applicable, units are bench-tested for output linearity and sensitivity against Bently Nevada factory specifications.
- Documentation Package — Shipment includes available traceability documents: test reports, calibration certificates, or OEM packing slips upon request.
Key Features & Benefits
- Industry-standard 3300 XL architecture — fully compatible with existing Bently Nevada monitoring systems
- High-temperature probe design suitable for turbine, compressor, and pump applications
- Integral cable construction eliminates field connection points, reducing failure risk
- Wide gap range provides installation flexibility across shaft diameters
- Reverse-polarity and short-circuit protected driver electronics
- Consistent output sensitivity simplifies system calibration and replacement
Typical Applications
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal compressor rotor position and vibration measurement
- Pump and motor bearing displacement monitoring
- Gearbox and fan shaft eccentricity detection
- Critical rotating machinery protection systems in oil & gas, power generation, and petrochemical plants
Compatible System Components
- Monitors: Bently Nevada 3300 Series, 3500 Series rack-based monitoring systems
- Extension Cables: 330130-XX-XX series (matched system required)
- Drivers / Oscillator-Demodulators: 330180-X1-05 and compatible 3300 XL drivers
- Interconnect: Standard BNC coaxial cabling per Bently Nevada wiring guidelines
- DCS Integration: 4–20 mA output modules for DeltaV, Honeywell Experion, ABB 800xA
Global Sourcing & Shipping Capabilities
- Stock Location: China (Mainland) — ships worldwide
- Lead Time: In-stock items ship within 1–3 business days; sourced items 5–15 business days
- Shipping Methods: DHL Express, FedEx International Priority, UPS Worldwide, sea freight for bulk orders
- Export Compliance: All shipments comply with applicable export control regulations (EAR/ECCN)
- Customs Documentation: Commercial invoice, packing list, and certificate of origin provided as standard
- Minimum Order: 1 unit; volume pricing available for orders of 5+ units
Certifications & Compliance Statement
The Bently Nevada 330103-00-07-10-01-00 is manufactured to comply with applicable international standards including CE Marking (EMC Directive), ATEX Directive 2014/34/EU (Zone 1/2 rated variants), FM Approval (USA), and CSA Certification (Canada). Konmask.com supplies this product as an authorized reseller or verified surplus distributor. We do not manufacture, modify, or relabel any products. All trademarks remain the property of their respective owners (Baker Hughes / Bently Nevada).
How to Order
- Confirm Part Number: Verify the full suffix string 330103-00-07-10-01-00 matches your system requirement. Each suffix segment defines cable length, temperature rating, and connector type.
- Request a Quote: For orders of 3+ units or urgent requirements, email support@konmask.com for priority pricing.
- Place Order: Add to cart and complete checkout. We accept T/T bank transfer, PayPal, and major credit cards.
- Receive Documentation: After payment, we issue a proforma invoice and shipping confirmation with tracking number within 24 hours.
Authenticity & Trust FAQ
Q: Are these units genuine Bently Nevada products?
A: Yes. All units are sourced from verified supply chains. We provide available traceability documentation upon request and do not sell counterfeit or remanufactured goods.
Q: Can I request a test report or calibration certificate?
A: Yes, where available. Please contact us before ordering to confirm documentation availability for your specific unit.
Q: What is your return policy?
A: We offer a 30-day return window for units in original, uninstalled condition. DOA (Dead on Arrival) units are replaced or refunded within 7 business days of confirmed inspection.
Q: Do you offer warranty?
A: We provide a 90-day seller warranty covering defects in materials and workmanship under normal operating conditions. This is in addition to any remaining OEM warranty.
Q: Can you source other Bently Nevada part numbers?
A: Yes. Contact us with your full BOM or part list and we will provide availability and pricing within 24 hours.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






