Vibration & Shaft Monitoring Solution – Bently Nevada 330104-00-02-05-02-00 | 3300 XL Series
The Bently Nevada 330104-00-02-05-02-00 is a high-precision eddy-current proximity transducer engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in rotating machinery. Part of the industry-standard 3300 XL Series, this transducer is the preferred choice of reliability engineers and OEM integrators worldwide.
Where This Product Is Used
This transducer is deployed across critical rotating equipment in demanding industrial environments:
- Steam & Gas Turbines – Real-time shaft radial vibration monitoring to detect imbalance, misalignment, and rubs before catastrophic failure.
- Centrifugal Compressors – Axial position and thrust monitoring in petrochemical and LNG plants.
- Pumps & Fans – Continuous bearing health surveillance in power generation and water treatment facilities.
- Gearboxes – Gear mesh frequency analysis and shaft orbit measurement.
- Marine Propulsion Systems – Shaft monitoring in shipboard turbine and diesel-electric drive trains.
- Paper & Steel Mills – Roll and drive shaft condition monitoring in high-vibration environments.
Technical Specifications
- Part Number: 330104-00-02-05-02-00
- Series: Bently Nevada 3300 XL
- Probe Tip Diameter: 5 mm (standard)
- Cable Length: 2 m (extension cable)
- Measurement Range: 0.25 mm to 2.25 mm (linear range)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: 0 Hz to 10,000 Hz (–3 dB)
- Operating Temperature: –35°C to +177°C (probe); –35°C to +66°C (driver)
- Supply Voltage: –24 VDC (nominal)
- Output: –1 VDC to –21 VDC
- Connector: Standard BNC / integral cable
- Target Material: AISI 4140 steel (or equivalent)
- Agency Approvals: CE, ATEX, FM (see Compliance section)
Why Engineers Specify This Model
- Drop-in 3300 XL Compatibility – Direct replacement for legacy 3300 series installations without recalibration of existing monitors.
- Extended Temperature Range – Rated to +177°C probe tip, suitable for hot-section turbine bearing pedestals.
- High EMI Immunity – Shielded coaxial cable construction rejects electrical noise in VFD-heavy environments.
- Proven MTBF – Bently Nevada’s eddy-current technology has a field-demonstrated MTBF exceeding 200,000 hours.
- API 670 Compliant – Meets the mandatory vibration monitoring standard for critical machinery in oil & gas.
- Plug-and-Play with 3500 Rack – Fully compatible with Bently Nevada 3500 Series monitoring system without additional signal conditioning.
Complete System Bill of Materials
For a fully functional proximity measurement loop, the following components are typically required:
- Probe: 330104-00-02-05-02-00 (this item)
- Extension Cable: 330130-045-00-00 (4.5 m) or 330130-080-00-00 (8 m)
- Driver / Proximitor: 330180-X1-05 (3300 XL 8mm driver) or 330180-X1-CN (Chinese market variant)
- Monitor Module: Bently Nevada 3500/40M Proximitor / Seismic Monitor
- Rack: Bently Nevada 3500/05 Rack Interface Module
- Barrier (if ATEX zone): MTL 787S+ or equivalent Zener barrier
Contact support@konmask.com for complete loop pricing and availability.
Compliance & Industry Standards
- API 670 – Machinery Protection Systems (5th Edition)
- IEC 61511 – Functional Safety for the Process Industry
- ATEX Directive 2014/34/EU – Zone 1 & Zone 2 hazardous area rated
- FM Approved – Class I, Division 1 & 2, Groups A–D
- CE Marking – EMC Directive 2014/30/EU
- RoHS Compliant – Restriction of Hazardous Substances
Quality Assurance & Sourcing
Every 330104-00-02-05-02-00 unit offered through Konmask.com is:
- Sourced from authorized distributors or verified surplus channels with full traceability documentation.
- Inspected against Bently Nevada factory specifications prior to dispatch.
- Shipped with original packaging, calibration data sheet, and certificate of conformance where available.
- Backed by Konmask’s 90-day quality guarantee on all industrial automation components.
How to Source This Part
Ready to order or need a formal quotation for your procurement team?
- Email: support@konmask.com
- Phone / WhatsApp: +0086 19859288691
- Lead Time: Typically 3–7 business days for in-stock units; 2–4 weeks for sourced orders.
- MOQ: 1 piece (no minimum order quantity)
- Payment: T/T, PayPal, credit card via Shopify Payments
- Export: Worldwide shipping with DHL / FedEx / UPS express options
Application-Specific FAQ
Q: Is the 330104-00-02-05-02-00 compatible with the Bently Nevada 3500 monitoring system?
A: Yes. The 3300 XL probe series is fully compatible with the 3500 rack system when paired with the appropriate 3300 XL driver/proximitor module.
Q: What is the difference between the 330104 and 330105 probe series?
A: The 330104 uses a 5 mm tip diameter optimized for smaller shaft diameters and tighter installation clearances, while the 330105 is an 8 mm tip for longer linear range applications.
Q: Can this probe be used in a hazardous (ATEX) area?
A: Yes, when installed with a certified Zener barrier or galvanic isolator and in accordance with the ATEX installation drawing provided by Bently Nevada.
Q: What target material is required for accurate measurement?
A: AISI 4140 steel is the reference target. Other ferromagnetic materials may require scale factor correction; non-ferrous targets are not suitable.
Q: Do you provide calibration certificates?
A: Calibration data sheets are included where available. For new factory-sealed units, the original Bently Nevada CoC is provided.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






