Bently Nevada 330103-00-11-10-01-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330103-00-11-10-01-00 is a high-precision eddy-current proximity transducer system designed for continuous vibration and position monitoring of rotating machinery. Sourced and verified by Konmask.com, this unit is suitable for OEM replacement, system upgrade, and cross-brand equivalent selection in critical industrial environments.
Technical Specifications
- Manufacturer: Bently Nevada (Baker Hughes)
- Part Number / SKU: 330103-00-11-10-01-00
- Series: 3300 XL 8mm Proximity Transducer System
- Sensing Technology: Eddy-Current (Non-contact)
- Probe Tip Diameter: 8 mm
- Cable Length: 1.0 m (extension cable)
- Measurement Range: 0.25 mm – 2.26 mm (linear range)
- Output Signal: –7.87 V/mm (–200 mV/mil)
- Supply Voltage: –24 VDC (nominal)
- Operating Temperature: –35°C to +121°C (probe); –35°C to +66°C (driver)
- Connector Type: MIL-C-5015 (standard)
- Approvals: CE, ATEX, FM (intrinsically safe options available)
- Weight: ~40 g
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as functional equivalents or drop-in replacements for the 330103-00-11-10-01-00. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 330103-00-06-10-01-00 – Same series, 0.6 m cable variant
- Bently Nevada 330103-00-08-10-01-00 – 0.8 m cable variant
- Bently Nevada 330180-91-00 – 3300 XL 8mm standard probe (alternative connector)
- Epro PR6423/010-030 – 8mm eddy-current probe, compatible with CON021 driver
- Epro PR6424/010-030 – 8mm probe with extended temperature range
- Metrix ST5484E – Equivalent proximity transducer for turbomachinery
- Emerson 330130-080-00-00 – 3300 NSv 8mm proximity probe system
Note: Cross-brand replacements require driver/monitor compatibility verification. Contact Konmask for a free selection consultation.
Why Choose the Original Model
- Factory-calibrated sensitivity: –200 mV/mil output ensures direct compatibility with Bently Nevada 3300/3500 series monitors without recalibration
- Proven reliability: Widely deployed in power generation, oil & gas, and petrochemical industries for 20+ years
- API 670 compliant: Meets the standard for machinery protection systems
- Integrated system design: Probe, extension cable, and driver are factory-matched for optimal linearity and temperature compensation
- Broad approvals: ATEX / FM / IECEx certifications available for hazardous area installations
Typical Applications
- Radial shaft vibration monitoring on steam and gas turbines
- Axial position (thrust) measurement on compressors
- Differential expansion monitoring on large rotating equipment
- Speed and phase reference measurement (Keyphasor)
- Eccentricity monitoring during slow-roll startup
- Bearing housing and casing vibration in critical machinery trains
System Compatibility
The 330103-00-11-10-01-00 is designed to integrate with the following Bently Nevada monitor platforms:
- Bently Nevada 3500 Series – Machinery Protection System (most common pairing)
- Bently Nevada 3300 Series – Legacy machinery monitoring racks
- Bently Nevada System 1 – Condition monitoring software platform
- Emerson AMS 6500 – ATG machinery health monitor
- Third-party monitors: Compatible with any monitor accepting –200 mV/mil eddy-current input (verify driver output impedance)
Selection Guide
Use the table below to select the correct 330103 variant for your application:
- Cable Length: -00-06 (0.6 m) / -00-08 (0.8 m) / -00-11 (1.0 m, this model) / -00-14 (1.4 m)
- Target Material: -10 = Steel (standard) / -11 = Stainless Steel
- Connector: -01 = MIL-C-5015 / -02 = Flying leads
- Approval: -00 = Standard / -01 = FM/ATEX intrinsically safe
If your application requires a different cable length, connector type, or hazardous area rating, contact our team for the correct part number.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels
- Each unit inspected and tested prior to shipment
- Traceability documentation available upon request (COC, test reports)
- OEM-original packaging preserved where available
- Warranty: 12 months from date of shipment
How to Order
- Confirm part number: 330103-00-11-10-01-00
- Specify quantity and required delivery timeline
- Request a quote via support@konmask.com or add to cart directly
- Provide end-use application details for export compliance (if applicable)
- Receive order confirmation and tracking within 1 business day
Replacement & Compatibility FAQ
Q: Can I use an Epro PR6423 as a direct replacement?
A: Functionally similar, but the Epro probe requires a CON021 driver, not the Bently Nevada driver. The monitor input card must also accept the Epro signal format. Not a plug-and-play swap without system-level verification.
Q: Is the 330103-00-11-10-01-00 compatible with the 3500/40M monitor?
A: Yes. The 3500/40M Proximitor I/O module is designed to accept 3300 XL 8mm system inputs at –200 mV/mil sensitivity.
Q: What is the difference between 330103 and 330180?
A: The 330103 is a complete system (probe + extension + driver). The 330180 is a probe-only component. For a complete system, always specify the 330103 series.
Q: Can Konmask supply the matching extension cable and driver separately?
A: Yes. We stock the full 3300 XL system components. Contact us with your required cable length and driver model.
Q: Do you offer expedited shipping for urgent plant shutdowns?
A: Yes. Express air freight is available globally. Contact us with your timeline and we will confirm availability and lead time within 4 hours.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






