Bently Nevada 330101-30-49-10-02-05 Proximity Probe | Replacement, Equivalent & Selection Guide
The Bently Nevada 330101-30-49-10-02-05 is a high-precision eddy-current proximity probe designed for continuous, non-contact measurement of shaft vibration, position, and eccentricity in rotating machinery. This page provides full technical specifications, compatible replacement models, application guidance, and sourcing information to help engineers and procurement teams make confident selection decisions.
Technical Specifications
| Part Number | 330101-30-49-10-02-05 |
| Brand / OEM | Bently Nevada (Baker Hughes) |
| Type | Eddy-Current Proximity Probe |
| Probe Length | 30 in (762 mm) |
| Cable Length | 49 in (1,245 mm) |
| Tip Diameter | 8 mm (standard) |
| Sensitivity | 200 mV/mil (7.87 V/mm) |
| Linear Range | 80–200 mil (2.0–5.1 mm) |
| Operating Temperature | −35 °C to +177 °C |
| Target Material | AISI 4140 steel (standard) |
| Connector | 10-32 coaxial |
| Housing Material | Stainless steel |
| Weight | 385 g |
| System Compatibility | 3300 XL / 3500 Series monitoring systems |
Compatible Replacement & Equivalent Models
The following models are functionally equivalent or drop-in replacements for the 330101-30-49-10-02-05. Always verify cable length, connector type, and system compatibility before substitution.
| Part Number | Brand | Key Difference | Compatibility |
|---|---|---|---|
| 330101-30-49-10-02-00 | Bently Nevada | Different extension cable suffix | Direct replacement (verify extension) |
| 330101-30-49-10-01-05 | Bently Nevada | Armored cable variant | Same system, different environment rating |
| 330104-30-49-10-02-05 | Bently Nevada | 3300 XL 8 mm probe series | 3300 XL / 3500 systems |
| PR6423/010-100 | Epro (GE) | 8 mm eddy-current, same sensitivity | Compatible with 3300/3500 via adapter |
| CWY-DO-810-05-00 | Zhonghang (CNPEC) | Chinese OEM equivalent | Verify system calibration |
| TQ401-A30-B49-C10-D02 | Metrix | Similar range and sensitivity | Cross-reference required |
Note: Replacement models must be calibrated to the same driver/extension combination used in the original system. Contact our technical team for cross-reference validation.
Why Choose the Original Model
- OEM-certified performance — factory-calibrated to Bently Nevada 3300/3500 system standards with traceable documentation.
- Proven reliability — widely deployed in power generation, petrochemical, and compressor train applications globally.
- Full system integration — plug-and-play with existing 3300 XL and 3500 Series monitors without recalibration.
- Long service life — stainless steel housing and high-temperature rating ensure durability in harsh environments.
- Regulatory compliance — meets API 670 machinery protection standard requirements.
Typical Applications
- Shaft radial vibration monitoring on steam and gas turbines
- Rotor position and eccentricity measurement on centrifugal compressors
- Axial thrust position monitoring on pumps and fans
- Phase reference (Keyphasor) triggering in torsional analysis
- Differential expansion measurement on large rotating machinery
- Petrochemical plant critical machinery protection systems
System Compatibility
The 330101-30-49-10-02-05 probe is designed to operate within the Bently Nevada 3300 XL and 3500 Series machinery monitoring platforms. It must be paired with the correct extension cable and driver/monitor module to maintain calibrated sensitivity of 200 mV/mil.
- Compatible monitors: 3500/40M, 3500/42M, 3300/16, 3300/20
- Required extension cable: 330130-XX-XX series (length must match system gap)
- Driver module: 3300 XL 8 mm driver (330180 series)
- Not compatible with: 7200 Series or Proximitor sensors without reconfiguration
Selection Guide
Use the following criteria to confirm this model is the correct choice for your application:
- Probe length: Confirm 30 in (762 mm) fits your bearing housing and mounting bracket geometry.
- Cable length: 49 in (1,245 mm) integral cable — verify routing distance to junction box or extension cable connector.
- Target material: Standard calibration is for AISI 4140 steel. Non-standard shaft materials require recalibration.
- Temperature range: Suitable for up to 177 °C probe tip temperature. For higher temperatures, consult high-temp variants.
- Connector suffix (-05): Indicates standard 10-32 coaxial connector. Confirm connector type matches your extension cable.
- Armoring (-02): Non-armored cable. If mechanical protection is required, select the -01 armored variant.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels with full traceability.
- Each probe undergoes incoming inspection including dimensional check, sensitivity verification, and connector integrity test.
- Calibration certificates and test reports available upon request.
- Konmask.com specializes in industrial automation components for B2B buyers — we prioritize spec accuracy and documentation over volume discounting.
- Lead time: In-stock units ship within 2 business days. Special orders: 7–21 business days depending on sourcing channel.
How to Order
- Confirm the full part number: 330101-30-49-10-02-05
- Specify required quantity and delivery timeline.
- Request calibration certificate or test report if required for your QA process.
- Submit your RFQ via the product page or contact us directly at support@konmask.com.
- For bulk orders or long-term supply agreements, request a dedicated quote.
Replacement & Compatibility FAQ
Q: Can I use a 330104 series probe as a direct replacement for the 330101?
A: Both are 8 mm eddy-current probes compatible with 3300/3500 systems, but they have different body configurations. Verify mounting thread and housing dimensions before substitution.
Q: Will a third-party equivalent (e.g., Epro PR6423) work with my Bently Nevada 3500 monitor?
A: In many cases yes, but the monitor must be reconfigured to accept the third-party probe’s sensitivity curve. Consult your system integrator before substitution.
Q: What does the suffix “-05” indicate?
A: The last two digits indicate the connector/termination type. “-05” denotes the standard 10-32 coaxial connector used in most 3300/3500 installations.
Q: Is recalibration required after replacing a probe?
A: If replacing with an identical OEM part number, recalibration is typically not required. For cross-brand replacements, gap voltage verification and sensitivity check are mandatory.
Q: Do you provide documentation for customs and import compliance?
A: Yes. We provide commercial invoices, packing lists, and HS code documentation (HS 9031.80) for all international shipments.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


