Vibration & Position Monitoring Solution – Bently Nevada 330103-00-13-10-01-00 | 3300 XL Series
Where This Product Is Used
The Bently Nevada 330103-00-13-10-01-00 proximity transducer system is engineered for continuous, non-contact measurement of shaft vibration, axial position, and differential expansion in rotating machinery. Typical deployment environments include:
- Steam & Gas Turbines – Radial shaft vibration monitoring on high-speed turbine rotors in power generation plants
- Centrifugal Compressors – Axial thrust position measurement in petrochemical and LNG compression trains
- Pumps & Fans – Continuous bearing clearance monitoring in critical process pumps (API 670 applications)
- Gearboxes – Gear mesh frequency analysis and shaft orbit measurement
- Marine Propulsion Systems – Shaft displacement monitoring in ship propulsion drives
- Paper & Steel Mills – Roll position and vibration monitoring in heavy industrial machinery
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 330103-00-13-10-01-00 |
| Series | Bently Nevada 3300 XL |
| Type | Proximity Transducer System (Eddy Current) |
| Probe Cable Length | 13 ft (≈ 4 m) |
| Extension Cable Length | 10 ft (≈ 3 m) |
| Measurement Range | 0 – 80 mil (0 – 2.032 mm) linear range |
| Output Signal | –24 VDC nominal (–18 to –24 VDC system supply) |
| Scale Factor | 200 mV/mil (7.87 V/mm) |
| Frequency Response | DC to 10,000 Hz (–3 dB) |
| Operating Temperature | –35 °C to +177 °C (probe tip) |
| Target Material | AISI 4140 steel (standard); other alloys with calibration |
| Connector | Standard BNC / integral armored cable |
| Approvals | CE, FM, CSA, ATEX |
Why Engineers Specify This Model
- Proven 3300 XL Platform – Industry-standard eddy current technology trusted in over 100,000 installations worldwide; direct drop-in replacement for legacy 3300 series hardware
- Matched Cable System – Probe, extension cable, and driver are factory-calibrated as a matched set, eliminating field calibration errors and ensuring API 670 compliance out of the box
- High-Temperature Probe Tip – Rated to 177 °C, suitable for hot-section turbine bearing pedestals without additional thermal protection
- Wide Frequency Bandwidth – DC to 10 kHz response captures both slow-roll runout and high-frequency gear mesh events in a single sensor
- Hazardous Area Rated – FM/CSA/ATEX approvals allow direct installation in Zone 1/Division 1 classified areas without additional barriers in many configurations
- System 1 Compatible – Fully compatible with Bently Nevada System 1 condition monitoring software for trend analysis, alarm management, and predictive maintenance workflows
Complete System Bill of Materials
The 330103-00-13-10-01-00 ships as a complete, calibrated proximity transducer system. Typical BOM for a single measurement channel:
- 330103-00-13-10-01-00 — Proximity Probe + Extension Cable Assembly (this item)
- 3300 XL 8mm Driver / Proximitor® (ordered separately, e.g. 330180-91-00)
- 3300 XL Barrier (if required for IS installation)
- Mounting bracket / probe holder (customer-supplied or Bently Nevada accessory)
- System 1 software license (for condition monitoring integration)
Compliance & Industry Standards
- API 670 – Machinery Protection Systems (5th Edition)
- IEC 61511 – Functional Safety for process industries (SIL-capable configurations)
- ATEX Directive 2014/34/EU – Explosive atmospheres equipment
- FM / CSA – North American hazardous location approvals
- CE Marking – EU market conformity
- ISO 10816 / ISO 20816 – Mechanical vibration evaluation of machines
Quality Assurance & Sourcing
Konmask.com sources the Bently Nevada 330103-00-13-10-01-00 through verified industrial automation distributors and authorized supply channels. Every unit undergoes the following before shipment:
- Visual inspection and label verification against OEM datasheet
- Functional continuity check on probe and extension cable assembly
- Secure anti-static packaging with humidity indicator card
- Certificate of conformance (CoC) available on request
- Traceability documentation retained for 5 years
How to Source This Part
Ready to order or need a formal quotation? Contact our industrial automation team:
- Online: Add to cart and check out directly — we accept T/T, PayPal, and major credit cards
- RFQ / Bulk Orders: Email support@konmask.com with quantity and required delivery date
- Phone / WhatsApp: +0086 19859288691 (Mon–Sat, 09:00–18:00 CST)
- Lead Time: In-stock units ship within 1–3 business days; ex-stock orders quoted within 24 hours
- Export: We ship globally via DHL, FedEx, and UPS with full export documentation
Application-Specific FAQ
Q: Is the 330103-00-13-10-01-00 a direct replacement for the older 330103 series?
A: Yes. The 3300 XL series is backward-compatible with 3300 series drivers and Proximitor® housings. No rewiring is required in most installations.
Q: Can this transducer be used on non-ferrous targets such as titanium or Inconel?
A: The standard calibration is for AISI 4140 steel. For non-ferrous or exotic alloy targets, a material-specific calibration curve must be applied. Contact us for calibrated variants.
Q: What is the maximum shaft speed this system can monitor?
A: The 10 kHz frequency response supports shaft speeds up to approximately 600,000 RPM for 1× vibration, making it suitable for virtually all industrial rotating machinery.
Q: Does this part include the Proximitor driver?
A: No. The 330103-00-13-10-01-00 is the probe and extension cable assembly only. The Proximitor driver (e.g., 330180-91-00) must be ordered separately.
Q: Is ATEX certification included for Zone 0 applications?
A: The standard unit carries Zone 1 / Division 1 ratings. Zone 0 applications require additional IS barriers. Please consult our technical team before specifying for Zone 0.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






