BENTLY NEVADA 330103-15-23-05-02-CN Proximity Probe | Replacement, Equivalent & Selection Guide
The Bently Nevada 330103-15-23-05-02-CN is a high-precision eddy-current proximity probe designed for continuous, non-contact vibration and position measurement in critical rotating machinery. This page provides full technical specifications, compatible replacement models, application guidance, and sourcing information to help engineers and procurement teams make confident selection decisions.
Technical Specifications
- Part Number: 330103-15-23-05-02-CN
- Brand: Bently Nevada (Baker Hughes)
- Type: Eddy-Current Proximity Probe
- Cable Length: 5 ft (1.5 m) integral cable
- Probe Tip Diameter: 5 mm
- Thread Size: M8 × 1.0
- Sensing Range: 0–2.0 mm (linear range)
- Scale Factor: 200 mV/mil (7.87 V/mm)
- Operating Temperature: −35 °C to +120 °C
- Target Material: AISI 4140 steel or equivalent
- System Compatibility: 3300 XL Series, 3500 Series monitoring systems
- Connector: CN (Chinese standard connector)
- Approvals: CE, ATEX (consult datasheet for zone ratings)
Compatible Replacement & Equivalent Models
The following models are functionally equivalent or drop-in replacements for the 330103-15-23-05-02-CN. Always verify cable length, connector type, and scale factor before substitution.
- 330103-15-23-05-02-00 — Standard international connector variant; same probe body and sensing range
- 330103-15-23-05-02-05 — Extended temperature variant; suitable for high-heat environments
- 330104-15-23-05-02-CN — 8 mm tip diameter variant; verify mounting hole compatibility
- 330180-51-05 — Proximitor/Seismic Interface Module compatible with 330103 series probes
- Emerson / Epro PR6423 Series — Third-party equivalent; confirm scale factor and connector wiring
- DWYER / Metrix equivalent probes — Available for non-critical or retrofit applications; consult application engineer
Note: Bently Nevada probes are system-matched. Mixing probe, extension cable, and proximitor from different series may affect calibration. Always use matched sets.
Why Choose the Original Model
- System-Calibrated Accuracy: Factory-matched with Bently Nevada proximitors for ±1% linearity across the full sensing range
- Proven Reliability: Deployed in thousands of turbines, compressors, and pumps worldwide in API 670-compliant installations
- OEM Traceability: Full material certification and lot traceability for regulated industries (power generation, oil & gas, petrochemical)
- Long Service Life: Stainless steel housing with hermetic sealing rated for continuous operation in harsh environments
- Warranty & Support: Backed by Baker Hughes global service network
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing clearance monitoring
- Gearbox and expander rotor dynamic analysis
- API 670 machinery protection systems
- Condition monitoring and predictive maintenance programs
System Compatibility
The 330103-15-23-05-02-CN is designed for use within the Bently Nevada 3300 XL and 3500 Series machinery monitoring systems. It must be paired with a compatible extension cable (e.g., 330130 series) and proximitor (e.g., 330180 series) to form a calibrated measurement chain.
- Compatible Proximitors: 330180-X1-05, 3300 XL 8mm Proximitor
- Compatible Extension Cables: 330130-045-00-CN, 330130-080-00-CN
- Monitor Cards: 3500/40M, 3500/42M, 3500/45, 3500/46M
- Not compatible with: 7200 Series probes or non-Bently Nevada monitor cards without signal conditioning
Selection Guide
Use the following parameters to confirm the correct model for your application:
- Cable Length: 330103-15-… = 5 ft; 330103-25-… = 8 ft; 330103-50-… = 16 ft
- Probe Tip Diameter: 330103 = 5 mm; 330104 = 8 mm
- Connector Type: -00 = standard; -CN = Chinese market connector; -05 = high-temp
- Target Gap: Confirm nominal gap (typically 1.0 mm for 5 mm probes) matches your bearing housing design
- Environment: For ATEX Zone 1/2 or IECEx requirements, verify suffix and certification documentation
If you are unsure which model fits your system, contact our technical team with your monitor card model number, existing probe part number, and cable run distance.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels with full inspection
- Each probe tested for impedance, sensitivity, and linearity prior to shipment
- Serialized packaging with original manufacturer labels preserved where available
- Certificate of Conformance (CoC) and test reports available upon request
- Export compliance: HS Code 9031.80 — precision measurement instruments
How to Order
- Online: Add to cart directly from this page
- Email: support@konmask.com — include part number, quantity, and required delivery date
- Phone / WhatsApp: +0086 19859288691
- Lead Time: In-stock items ship within 1–3 business days; sourced items typically 5–15 business days
- MOQ: 1 piece
- Payment: T/T, PayPal, credit card, and trade assurance accepted
Replacement & Compatibility FAQ
Q: Can I use a 330103-15-23-05-02-00 in place of the -CN variant?
A: The probe body is identical. The -CN suffix denotes the connector type. You may need an adapter or re-termination at the proximitor end. Confirm with your site electrician before installation.
Q: Is the 330103 series compatible with the Bently Nevada 3500/40M monitor?
A: Yes, when paired with the correct proximitor (330180 series) and extension cable. The 3500/40M accepts the standard 200 mV/mil scale factor output.
Q: Can I replace just the probe without replacing the extension cable and proximitor?
A: Only if the replacement probe is from the same calibrated set. Mixing components from different calibration batches may introduce measurement error. A full system re-calibration is recommended after any component replacement.
Q: Do you supply ATEX-certified versions?
A: Yes. Please specify your zone classification and required certification (ATEX / IECEx / SIL) when ordering.
Q: What is the typical service life of a Bently Nevada proximity probe?
A: Under normal operating conditions, 5–10 years. Probes in high-temperature or chemically aggressive environments should be inspected annually.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


