Turbine & Rotating Machinery Vibration Monitoring Solution – Bently Nevada 330104-00-11-90-02-00 | 3300 XL Series
Where This Product Is Used
The Bently Nevada 330104-00-11-90-02-00 Proximity Transducer System is purpose-built for continuous, non-contact vibration and position measurement on rotating machinery in mission-critical industrial environments. Typical deployment sites include:
- Steam and gas turbine shafts in power generation plants
- Centrifugal and axial compressors in oil & gas processing facilities
- Boiler feed pumps and large motor-driven equipment
- Petrochemical plant rotating equipment subject to API 670 requirements
- Marine propulsion and offshore platform machinery
- Pulp & paper mill drive trains and refiner rolls
Engineers specify this transducer system wherever shaft radial vibration, axial position (thrust), or differential expansion must be measured with micron-level accuracy and zero mechanical contact with the rotating element.
Technical Specifications
- Part Number: 330104-00-11-90-02-00
- Series: Bently Nevada 3300 XL Proximity Transducer System
- Transducer Type: Eddy-current (non-contact) proximity probe
- Probe Cable Length: 11 inches (driver-integrated configuration)
- Extension Cable: 90 cm (as encoded in part number)
- Driver/Oscillator: Integrated 3300 XL driver module
- Output Signal: -18 VDC nominal (standard Bently Nevada output range)
- Frequency Response: DC to 10,000 Hz
- Temperature Range: -35°C to +177°C (probe tip)
- Target Material: Steel (AISI 4140 / 4340 or equivalent)
- Connector: Standard Bently Nevada coaxial
- Compliance: API 670, CE, RoHS
- Weight: Approx. 40 g (probe assembly)
Why Engineers Specify This Model
- API 670 Compliant: Meets the machinery protection standard required by most EPC contractors and end-users in oil & gas and power generation.
- Non-Contact Measurement: Zero wear, zero mechanical loading on the shaft — ideal for continuous 24/7 operation without maintenance intervals.
- High Bandwidth (DC–10 kHz): Captures both slow-roll runout and high-frequency sub-synchronous instabilities in a single channel.
- Direct Replacement: Pin-compatible with existing 3300 XL installations — no rewiring or recalibration of the monitoring rack required.
- Proven Field Reliability: Bently Nevada 3300 XL systems are installed on tens of thousands of machines globally, with decades of documented MTBF data.
- Integrated Driver: Eliminates a separate oscillator/demodulator module, reducing panel space and potential failure points.
Complete System Bill of Materials
A fully functional Bently Nevada proximity measurement loop typically includes:
- Proximity Probe — 330104-00-11-90-02-00 (this item)
- Extension Cable — matched 3300 XL series cable (included in system)
- Proximitor / Driver — 3300 XL series driver (integrated or rack-mount)
- Monitoring Rack — Bently Nevada 3500 series rack or equivalent
- I/O Module — 3500/42M or 3500/45 vibration monitor card
- Power Supply — 3500/15 or 3500/05 rack power module
- Communication Gateway — 3500/92 or Modbus/TCP interface (optional)
Contact Konmask.com for complete loop pricing and availability on all associated components.
Compliance & Industry Standards
- API 670 — Machinery Protection Systems (5th Edition)
- IEC 61511 — Functional Safety for process industries (SIL-capable installations)
- CE Marking — European conformity for EMC and low-voltage directives
- RoHS — Restriction of Hazardous Substances compliant
- ISO 10816 / ISO 20816 — Mechanical vibration evaluation standards
Quality Assurance & Sourcing
Konmask.com sources Bently Nevada 330104-00-11-90-02-00 units through verified industrial automation supply channels. Every unit offered is:
- Inspected for physical integrity and connector condition prior to dispatch
- Shipped with original manufacturer documentation where available
- Traceable to batch/lot records for quality audit purposes
- Packaged in anti-static, moisture-resistant materials for safe international transit
We maintain stock of both new and reconditioned units. Condition is clearly stated on each listing. Reconditioned units undergo functional verification against Bently Nevada factory calibration specifications.
How to Source This Part
- Add to Cart — Place your order directly on Konmask.com for fastest processing.
- Request a Quote — For volume orders (>5 units) or project BOM requirements, email support@konmask.com for a formal quotation within 24 hours.
- Expedited Shipping — DHL Express, FedEx International Priority, and UPS Worldwide available. Lead time: 1–3 business days for in-stock units.
- Export Documentation — Commercial invoice, packing list, and certificate of origin provided for all international shipments.
Application-Specific FAQ
Q: Is the 330104-00-11-90-02-00 a direct replacement for the older 330104-00-11-10-02-00?
A: The primary difference is the extension cable length encoded in the part number. Verify your existing cable loop length before substituting. The driver and probe tip are electrically identical.
Q: Can this transducer be used with a Bently Nevada 3500 monitoring rack?
A: Yes. The 3300 XL proximity system is fully compatible with the 3500 series rack and all standard 3500/42M, 3500/45, and 3500/46M monitor cards.
Q: What shaft materials are compatible?
A: The eddy-current probe is calibrated for AISI 4140 steel. For stainless steel, Inconel, or titanium shafts, a material correction factor must be applied. Contact our technical team for recalibration guidance.
Q: Is this system suitable for hazardous area (ATEX/IECEx) installations?
A: The standard 330104-00-11-90-02-00 is not ATEX-rated. For Zone 1/Zone 2 hazardous area installations, specify the Bently Nevada 330180 series with appropriate barriers.
Q: Do you provide calibration certificates?
A: Calibration certificates are available upon request for new units. Reconditioned units include a functional test report. Contact us before ordering if a NIST-traceable certificate is required.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






