Bently Nevada 330104-00-24-10-01-00 – Eddy Current Proximity Transducer System | 3300 XL Series Platform
Engineering Background: The Bently Nevada 3300 XL Series represents the industry benchmark for non-contact shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system is the preferred choice of reliability engineers and OEM integrators worldwide for continuous machinery protection on turbines, compressors, pumps, and motors.
Product Positioning: The 330104-00-24-10-01-00 is a complete eddy current proximity transducer system comprising a 24mm probe, extension cable, and Proximitor® sensor. It delivers precise radial vibration, axial position, and differential expansion measurements with industry-leading signal stability — critical for uninterrupted plant operations and predictive maintenance programs.
Complete Technical Specifications
- Part Number: 330104-00-24-10-01-00
- Series / Platform: Bently Nevada 3300 XL Proximity Transducer System
- Probe Diameter: 24 mm (standard)
- Measurement Type: Radial vibration, axial position, differential expansion
- Operating Principle: Eddy current (non-contact)
- Sensitivity: 7.87 V/mm (200 mV/mil) nominal
- Linear Range: 0.25 mm – 2.26 mm (10 – 89 mil)
- Frequency Response: DC – 10,000 Hz (–3 dB)
- Supply Voltage: –24 VDC (nominal)
- Output Signal: –2 VDC to –18 VDC (proportional to gap)
- Temperature Range: –35°C to +177°C (probe); –35°C to +85°C (Proximitor)
- Cable Length: 1.0 m probe + 9.0 m extension (total 10 m system)
- Connector Type: Standard BNC / integral armored cable
- Compliance: API 670, CE, RoHS
- Weight: Approx. 40 g (probe assembly)
- Country of Origin: USA
Proven Application Environments
- Steam and gas turbines (power generation, petrochemical)
- Centrifugal and reciprocating compressors
- Boiler feed pumps and large motor-driven equipment
- Gearboxes and expanders in refinery and LNG plants
- Continuous machinery protection systems (CMS) per API 670
- Retrofit and upgrade of legacy Bently Nevada 3300 installations
Engineering Advantages
- API 670 Compliant: Meets the most stringent machinery protection standard for critical rotating equipment.
- Non-Contact Measurement: Zero mechanical wear; suitable for continuous 24/7 monitoring without maintenance intervals.
- Wide Temperature Tolerance: Probe rated to +177°C — reliable in high-heat turbine environments.
- Plug-and-Play Compatibility: Direct replacement for existing 3300 XL installations; no recalibration required when replacing like-for-like.
- High Signal Integrity: Armored cable construction minimizes EMI/RFI interference in industrial environments.
- Long Service Life: Solid-state design with no moving parts; MTBF exceeds 100,000 hours in typical installations.
System Architecture & Signal Flow
The 330104-00-24-10-01-00 operates as a three-component eddy current system:
- Probe (330104): Generates a high-frequency electromagnetic field. Gap changes between probe tip and target shaft modulate the field, producing a proportional voltage output.
- Extension Cable: Transmits the oscillator signal and output voltage between probe and Proximitor sensor. Cable impedance is matched to system specifications — do not substitute with non-OEM cables.
- Proximitor® Sensor: Conditions the raw probe signal into a calibrated DC voltage output (–2 to –18 VDC) suitable for direct input to Bently Nevada 3500 or 3300 monitoring racks, DCS, or SCADA systems.
Output is directly compatible with Bently Nevada 3500 Series monitoring racks, Rockwell Automation systems, and any DCS accepting standard ±24 VDC loop-powered analog inputs.
Sourcing & Quality Verification
- Source: Konmask.com sources 330104-00-24-10-01-00 units from authorized distributors and verified surplus channels with full traceability documentation.
- Inspection: Each unit undergoes visual inspection, connector integrity check, and functional verification prior to shipment.
- Documentation: Certificate of conformance and original manufacturer datasheet available upon request.
- Packaging: Ships in anti-static, moisture-barrier packaging with foam cushioning to prevent transit damage.
- Warranty: 12-month warranty against manufacturing defects; DOA replacement within 7 business days.
Procurement Process
- Confirm Part Number: Verify 330104-00-24-10-01-00 matches your existing system cable length and probe diameter requirements.
- Request Quote: Contact support@konmask.com for volume pricing, lead time, and availability confirmation.
- Submit PO: Purchase orders accepted via email or online checkout. Net-30 terms available for qualified accounts.
- Shipping: DHL Express / FedEx International Priority worldwide. Export documentation (EAR99 / ECCN) provided for customs clearance.
- Incoming Inspection: Recommended: verify part number label, connector condition, and cable continuity upon receipt before installation.
Technical FAQ
Q: Is 330104-00-24-10-01-00 compatible with the Bently Nevada 3500 monitoring rack?
A: Yes. The Proximitor output (–2 to –18 VDC) is fully compatible with 3500 Series proximity input modules (3500/42, 3500/44, 3500/46).
Q: Can I use a non-Bently Nevada extension cable with this probe?
A: Not recommended. The 3300 XL system is calibrated as a matched set. Substituting non-OEM cables will alter system sensitivity and invalidate API 670 compliance.
Q: What is the target material requirement?
A: The probe is calibrated for AISI 4140 steel. For other target materials (stainless, titanium, Inconel), a field calibration correction factor must be applied. Contact our engineering team for guidance.
Q: What is the lead time for this part?
A: Typically 3–7 business days for in-stock units. Contact us for current availability.
Q: Do you provide installation support?
A: Yes. Our technical team can provide installation guidelines, gap-setting procedures, and system commissioning checklists upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






