Rotating Machinery Vibration Monitoring Solution – Bently Nevada 330104-03-09-10-02-00 | 3300 XL Series
Where This Product Is Used
The Bently Nevada 330104-03-09-10-02-00 is a complete eddy-current proximity transducer system engineered for continuous, non-contact measurement of shaft radial vibration, axial position (thrust), and differential expansion on critical rotating machinery. Typical deployment environments include:
- Steam and gas turbines in power generation plants
- Centrifugal and axial compressors in petrochemical and LNG facilities
- Boiler feed pumps and large motor-driven equipment
- Gearboxes and expanders in refinery and chemical process trains
- Marine propulsion shafting and offshore platform rotating equipment
It is the preferred transducer system for plants running Bently Nevada 3500 Series machinery protection racks, System 1 condition monitoring software, and ADRE Sxp data acquisition systems.
Technical Specifications
- Part Number: 330104-03-09-10-02-00
- Series: 3300 XL 8 mm Proximity Transducer System
- Probe Tip Diameter: 8 mm
- Cable Length (Probe): 3 ft (0.9 m) integral armored cable
- Extension Cable Length: 9 m (standard)
- Driver/Oscillator: 3300 XL compatible proximitor oscillator-demodulator
- Measurement Range: 0.25 mm – 2.25 mm (linear range)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Supply Voltage: −24 VDC (nominal)
- Output: −1 VDC to −17 VDC (proportional to gap)
- Target Material: AISI 4140 steel (standard); other alloys require calibration
- Temperature Range (Probe): −35 °C to +177 °C
- Ingress Protection: IP67 (probe and connector)
- Connector: 10-32 coaxial, stainless steel
- Weight: ~80 g (probe + cable assembly)
- Compliance: CE, ATEX, IECEx, CSA
Why Engineers Specify This Model
- Drop-in 3300 XL compatibility: Fully interchangeable with existing 3300 XL probe/driver pairs without recalibration when target material is standard steel.
- High-temperature probe tip: Rated to 177 °C, suitable for hot-section turbine bearing pedestals without additional thermal isolation.
- Armored integral cable: Stainless-steel braid protects against mechanical damage in congested bearing housings.
- Factory-matched system: Probe, extension cable, and proximitor are calibrated as a matched set, eliminating field calibration errors.
- API 670 compliance: Meets the mandatory transducer system requirements for machinery protection on critical equipment per API Standard 670 (5th Edition).
- Broad target material database: Bently Nevada’s target material correction factors are pre-loaded in System 1, enabling accurate readings on non-standard shaft alloys.
Complete System Bill of Materials
The 330104-03-09-10-02-00 ships as a complete, factory-matched system. A typical installation BOM for one measurement point:
- 1× Bently Nevada 330104-03-09-10-02-00 Proximity Transducer System (this listing)
- 1× Bently Nevada 3500/40M or 3500/42M Proximitor I/O Module (rack-mounted)
- 1× Bently Nevada 3500/20 Rack Interface Module
- 1× Bently Nevada 3500/22M Transient Data Interface (optional, for ADRE)
- Mounting hardware: 3/8-24 UNF probe holder or M10 metric adapter bracket
- RG-58 coaxial extension cable (if additional length required beyond 9 m)
Contact Konmask.com for complete rack and channel configuration support.
Compliance & Industry Standards
- API 670 – Machinery Protection Systems (5th Edition)
- ISO 10816 / ISO 20816 – Mechanical vibration evaluation
- ATEX Directive 2014/34/EU – Equipment for explosive atmospheres
- IECEx IEC 60079 – Explosive atmospheres equipment
- CE Marking – EU electromagnetic compatibility and low-voltage directives
- CSA C22.2 – Canadian electrical safety certification
- RoHS Compliant – Restriction of hazardous substances
Quality Assurance & Sourcing
Konmask.com sources Bently Nevada 330104-03-09-10-02-00 units through authorized industrial distribution channels and verified surplus inventory from decommissioned plant upgrades. Every unit undergoes:
- Visual inspection for connector integrity, cable armor condition, and probe tip concentricity
- Electrical continuity and insulation resistance verification
- Gap-voltage output linearity check against Bently Nevada factory calibration curves
- Serialization and traceability documentation provided with shipment
Units are shipped in anti-static packaging with individual test records. OEM new-in-box stock is available subject to inventory; contact us to confirm current condition and lead time.
How to Source This Part
Ready to order or need a formal quotation for your procurement team?
- Online: Add to cart directly on this page for immediate checkout
- RFQ / PO: Email support@konmask.com with your PO number, required quantity, and delivery address
- Phone / WhatsApp: +0086 19859288691 (Monday–Friday, 09:00–18:00 CST)
- Lead Time: In-stock units ship within 1–3 business days; EXW Xiamen, China
- Export: DDP, DAP, and FOB Xiamen terms available; we handle export documentation and ECCN classification
Application-Specific FAQ
Q: Can the 330104-03-09-10-02-00 be used with a 3300 NSv proximitor instead of the 3300 XL driver?
A: No. The 3300 XL probe is calibrated for the 3300 XL oscillator-demodulator. Mixing with NSv or earlier 3300 drivers will produce calibration errors. Use the correct matched driver for your rack slot.
Q: What is the maximum shaft speed this transducer can accurately measure?
A: The 10,000 Hz frequency response supports accurate vibration measurement on shafts rotating up to approximately 600,000 RPM for 1× vibration components, well beyond the range of any practical industrial turbomachinery.
Q: Our shaft is 17-4 PH stainless steel. Do we need a special calibration?
A: Yes. Non-standard target materials require a material correction factor. Bently Nevada System 1 software includes correction curves for common alloys including 17-4 PH. Confirm your shaft alloy with our team and we will advise on the correct proximitor configuration.
Q: Is this system suitable for ATEX Zone 1 hazardous areas?
A: Yes, provided the complete installation (probe, extension cable, proximitor, and associated apparatus) is configured per the ATEX certificate and Bently Nevada installation drawing 141471-01. Confirm your zone classification and gas group with your site safety engineer before installation.
Q: Can Konmask provide a calibration certificate with the unit?
A: Yes. A gap-voltage calibration record is included with every shipment. Third-party NIST-traceable calibration certificates are available on request at additional cost.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






