Bently Nevada 330104-04-12-10-02-00 – Eddy Current Proximity Transducer | 3300 XL Series
The Bently Nevada 330104-04-12-10-02-00 is a precision eddy current proximity transducer engineered for continuous, non-contact measurement of shaft vibration, position, and eccentricity in rotating machinery. As a core component of the 3300 XL Proximity Transducer System, it is the preferred choice of reliability engineers and OEM integrators operating in power generation, petrochemical, and heavy industrial environments.
Designed to API 670 standards, this transducer delivers micron-level resolution with exceptional long-term stability — making it the benchmark for turbomachinery protection systems worldwide.
Complete Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 330104-04-12-10-02-00 |
| Series / Platform | Bently Nevada 3300 XL Proximity Transducer System |
| Measurement Type | Eddy Current (Non-contact) |
| Probe Tip Diameter | 5 mm (0.197 in) |
| Cable Length | 5 m (16.4 ft) — integral armored cable |
| Extension Cable | 3300 XL Series compatible (sold separately) |
| Driver / Oscillator | 3300 XL Proximitor® Sensor required |
| Output Sensitivity | 7.87 V/mm (200 mV/mil) |
| Linear Range | 0.25 – 2.54 mm (10 – 100 mil) |
| Frequency Response | DC to 10,000 Hz (–3 dB) |
| Operating Temperature | –35°C to +120°C (–31°F to +248°F) |
| Target Material | AISI 4140 steel (standard); other materials require calibration |
| Connector Type | Integral coaxial, reverse SMA |
| Ingress Protection | IP67 (probe body) |
| Compliance | API 670, CE, RoHS |
| Weight | Approx. 80 g |
Proven Application Environments
- Steam & Gas Turbines — radial vibration and thrust position monitoring per API 670
- Centrifugal Compressors — shaft orbit analysis and differential expansion measurement
- Pumps & Fans — continuous bearing clearance and eccentricity monitoring
- Electric Motors (>500 kW) — rotor dynamic analysis in critical drive trains
- Gearboxes — gear mesh frequency and shaft runout detection
- Marine Propulsion Systems — shaft alignment verification under load
Engineering Advantages
- Non-contact measurement eliminates mechanical wear and enables indefinite service life in continuous operation
- Flat frequency response DC–10 kHz captures both slow-roll runout and high-frequency vibration events in a single channel
- Integral armored cable resists oil, steam, and chemical exposure without additional conduit in most installations
- 3300 XL system compatibility ensures plug-and-play replacement in existing Bently Nevada protection architectures without recalibration of the Proximitor
- API 670 compliance satisfies machinery protection requirements for new installations and insurance audits
- Micron-level resolution supports predictive maintenance programs with early-warning sensitivity to sub-mil displacement changes
System Architecture & Signal Flow
The 330104-04-12-10-02-00 operates as part of a three-component eddy current measurement chain:
- Probe (330104-04-12-10-02-00) — generates a high-frequency electromagnetic field at the tip; target proximity modulates field impedance
- Extension Cable (3300 XL Series) — transmits the modulated RF signal with controlled impedance to the Proximitor
- Proximitor® Sensor (3300 XL) — demodulates the signal and outputs a calibrated DC voltage proportional to gap distance (–7.87 V/mm)
The DC voltage output connects directly to Bently Nevada 3500 Series rack monitors, DCS analog input cards, or standalone vibration analyzers. No additional signal conditioning is required for standard API 670 installations.
Sourcing & Quality Verification
All units supplied by Konmask.com are sourced through verified industrial distribution channels and subject to incoming inspection prior to dispatch:
- Visual inspection of probe tip, cable jacket, and connector for physical integrity
- Continuity and impedance check on coaxial cable assembly
- Verification of part number label against Bently Nevada OEM marking standards
- Packaging inspection for original or equivalent protective packaging
Certificates of conformance and test reports are available upon request for critical installations. Contact support@konmask.com to request documentation before purchase.
Procurement Process
- Confirm compatibility — verify your existing Proximitor model (3300 XL series) and extension cable length before ordering
- Request a quote — for volume orders (>5 units) or urgent requirements, email support@konmask.com for lead time and pricing
- Place order — add to cart and complete checkout; HKD pricing displayed; multi-currency checkout supported
- Shipping — standard international express (DHL / FedEx) with tracking; typical transit 3–7 business days to most destinations
- After-sales — 30-day return policy for unused items in original condition; technical support available via email
Technical FAQ
Q: Is the 330104-04-12-10-02-00 compatible with the Bently Nevada 3500 monitoring rack?
A: Yes. The 3300 XL Proximitor Sensor outputs a standard –24 VDC-powered, voltage-proportional signal fully compatible with 3500 Series monitor input cards.
Q: Can this probe measure non-ferrous targets (aluminum, titanium)?
A: The standard calibration is optimized for AISI 4140 steel. Non-ferrous or non-standard alloy targets require a custom calibration curve — contact us for application engineering support.
Q: What is the maximum shaft speed this transducer can monitor?
A: The –3 dB frequency response of DC to 10,000 Hz supports shaft speeds up to approximately 600,000 RPM for 1× vibration detection, well beyond typical turbomachinery operating ranges.
Q: Is an extension cable included?
A: No. The 330104-04-12-10-02-00 includes a 5 m integral cable. If a longer total system cable length is required, a compatible 3300 XL extension cable must be ordered separately.
Q: Do you provide ATEX / IECEx certified versions?
A: Bently Nevada offers ATEX-rated variants in the 3300 XL series. Please specify your hazardous area classification when requesting a quote so we can confirm the correct part number.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






