Bently Nevada 330104-05-13-10-01-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-05-13-10-01-00 is a high-precision proximity transducer system from the industry-leading 3300 XL Series, designed for continuous vibration and position monitoring of rotating machinery in critical industrial environments. This page provides full technical specifications, compatible replacement models, and a structured selection guide to help engineers and procurement teams make informed sourcing decisions.
Technical Specifications
- Part Number / SKU: 330104-05-13-10-01-00
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL Proximity Transducer System
- Sensor Type: Eddy Current Proximity Transducer
- Cable Length: 5 m (probe cable)
- Extension Cable Length: 13 m
- Output: -18 VDC nominal (standard Bently Nevada output)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Range: DC to 10,000 Hz
- Operating Temperature: -35°C to +121°C (probe); -35°C to +66°C (driver)
- Target Material: AISI 4140 steel or equivalent
- Connector Type: Standard BNC / integral connector
- Approvals: CE, ATEX, FM (refer to datasheet for specific suffix options)
- Weight: Approx. 80 g
- Condition: New / Surplus / Refurbished (specify on inquiry)
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330104-05-13-10-01-00. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 330104-00-06-10-02-00 — Same 3300 XL series, different cable length configuration
- Bently Nevada 330104-05-13-10-02-00 — Metric variant with alternate connector suffix
- Bently Nevada 330180-X1-05 — 3300 NSv Proximity Transducer, compatible driver electronics
- Epro PR6423/010-040 — Third-party eddy current transducer, compatible with Bently Nevada monitors
- Epro PR6424/010-040 — High-temperature variant, suitable for turbine applications
- Metrix ST5484E — Equivalent eddy current proximity probe system
- Emerson CSI 330104 equivalent — Post-acquisition compatible part
Note: Replacement compatibility depends on gap voltage, sensitivity, and monitor input specifications. Contact support@konmask.com for cross-reference verification.
Why Choose the Original Model
- OEM Precision: Factory-calibrated to Bently Nevada 3300 XL monitor specifications — no re-calibration required
- Proven Reliability: Deployed globally in power generation, oil & gas, and petrochemical plants
- System Integrity: Maintains full compatibility with Bently Nevada System 1 software and 3500 rack monitors
- Certification Compliance: Meets ATEX/FM hazardous area requirements out of the box
- Long Service Life: Robust stainless steel housing rated for harsh industrial environments
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing displacement monitoring
- Gearbox and fan shaft eccentricity detection
- Critical machinery protection systems (API 670 compliant installations)
System Compatibility
The 330104-05-13-10-01-00 is designed to integrate with the following Bently Nevada monitor platforms:
- Bently Nevada 3500 Series — Machinery Protection System (MPS)
- Bently Nevada 3300 Series — Legacy monitoring racks
- Bently Nevada System 1 — Condition monitoring software platform
- Emerson AMS Suite — Asset management integration
- Third-party monitors accepting -18 VDC / 200 mV/mil standard input
Selection Guide
Use the following criteria to confirm the 330104-05-13-10-01-00 is the correct part for your application:
- Probe Cable Length: 5 m — confirm your installation distance
- Extension Cable Length: 13 m — verify total probe-to-driver distance
- Target Gap Range: Typically 0.25 mm to 2.25 mm (10–90 mil) for optimal linearity
- Monitor Input: Must accept 200 mV/mil (7.87 V/mm) sensitivity
- Power Supply: -24 VDC (±10%) required at driver/oscillator
- Hazardous Area: Confirm ATEX/FM suffix requirement matches your zone classification
- Target Material: AISI 4140 or equivalent ferromagnetic steel recommended
If your application requires a different cable length, connector type, or approval suffix, refer to the Bently Nevada 330104 ordering matrix or contact us for a custom configuration quote.
Quality Assurance & Sourcing
- Source: Authorized distributor stock, factory-sealed surplus, and certified refurbished units available
- Inspection: All units inspected for physical integrity and electrical continuity prior to shipment
- Documentation: Certificate of conformance and original datasheet available on request
- Warranty: 12-month warranty on new units; 90-day warranty on refurbished units
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
How to Order
- Confirm part number: 330104-05-13-10-01-00
- Specify required condition: New / Surplus / Refurbished
- Provide quantity and delivery destination
- Request a quote via support@konmask.com or call +0086 19859288691
- Receive proforma invoice and confirm payment terms
- Shipment with tracking and documentation package
Replacement & Compatibility FAQ
Q: Can I use a third-party proximity probe instead of the 330104-05-13-10-01-00?
A: Yes, provided the replacement matches the 200 mV/mil sensitivity, -18 VDC output, and physical dimensions. Always validate with your monitor manufacturer before substitution.
Q: Is the 330104-05-13-10-01-00 compatible with the Bently Nevada 3500/42M monitor?
A: Yes. The 3300 XL transducer system is fully compatible with the 3500 series monitor rack when using the appropriate I/O module.
Q: What is the difference between 330104-05-13-10-01-00 and 330104-05-13-10-02-00?
A: The last two digits indicate the connector/termination suffix. The -01-00 and -02-00 variants differ in connector style. Verify your monitor’s input connector before ordering.
Q: Do you offer calibration services for this transducer?
A: Yes. Calibration and functional testing services are available. Contact us for details.
Q: Can this unit be used in ATEX Zone 1 hazardous areas?
A: Certain suffix configurations are ATEX-certified. Confirm the approval suffix in your part number before installation in classified areas.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






