Bently Nevada 330104-07-18-10-01-00 – Eddy-Current Proximity Transducer | 3300 XL Series Platform
Engineering Background
The Bently Nevada 3300 XL Proximity Transducer System is the industry benchmark for non-contact, continuous shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system is deployed globally in turbines, compressors, pumps, and motors where machine protection is mission-critical.
Product Positioning
Part number 330104-07-18-10-01-00 is a complete eddy-current transducer assembly featuring a 5 mm probe tip, 18-inch (457 mm) armored extension cable, and standard BNC/TNC termination. It integrates directly with Bently Nevada 3300 XL series proximitors/drivers and is fully compatible with System 1 and 3500 monitoring racks.
Complete Technical Specifications
- Part Number: 330104-07-18-10-01-00
- Series / Platform: Bently Nevada 3300 XL
- Sensing Technology: Eddy-current (non-contact)
- Probe Tip Diameter: 5 mm
- Extension Cable Length: 18 inches (457 mm)
- Linear Range: 0.25 mm – 2.25 mm (10 mil – 90 mil)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC – 10,000 Hz (–3 dB)
- Supply Voltage: –24 VDC (nominal)
- Output Signal: –2 VDC to –18 VDC (proportional to gap)
- Operating Temperature: –35°C to +121°C (probe); –35°C to +85°C (driver)
- Target Material: AISI 4140 steel (standard); other alloys with calibration
- Connector Type: Standard BNC/TNC
- Compliance: API 670, CE, RoHS
- Weight: ~80 g
- Country of Origin: United States
Proven Application Environments
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal and reciprocating compressor rotor position measurement
- Pump and motor bearing proximity sensing
- Axial thrust position monitoring on critical rotating equipment
- Differential expansion and eccentricity measurement in power generation
- Petrochemical, oil & gas, LNG, and power plant machinery protection systems
Engineering Advantages
- API 670 Compliant: Meets the most stringent international standard for machinery protection instrumentation.
- Non-Contact Measurement: Zero mechanical wear; continuous operation without maintenance intervals.
- Wide Frequency Bandwidth: DC to 10 kHz captures both slow-roll runout and high-frequency vibration events.
- High EMI Immunity: Shielded armored cable design rejects electrical noise in industrial environments.
- Direct System Integration: Plug-and-play compatibility with Bently Nevada 3300 XL proximitors, 3500 racks, and System 1 software.
- Proven Field Reliability: Millions of operating hours across global installations in the most demanding process industries.
System Architecture & Signal Flow
The 330104-07-18-10-01-00 operates as part of a three-component eddy-current system:
- Probe (330104 series): Generates a high-frequency electromagnetic field at the tip. Gap changes between probe and conductive target modulate the field impedance.
- Extension Cable (18″): Transmits the modulated signal from probe to driver/proximitor with minimal signal loss. Armored jacket provides mechanical and EMI protection.
- Proximitor/Driver (3300 XL, sold separately): Demodulates the signal and outputs a calibrated DC voltage proportional to the probe-to-target gap, feeding the 3500 monitoring rack or DCS input card.
Output voltage range: –2 VDC (near gap) to –18 VDC (far gap), with a scale factor of 200 mV/mil for direct engineering unit conversion.
Sourcing & Quality Verification
- All units sourced from authorized distributors or verified surplus channels with full traceability documentation.
- Each unit undergoes incoming inspection: visual check, connector integrity, and cable continuity verification.
- Original Bently Nevada labeling, part number, and date codes preserved and documented.
- Calibration certificates and test reports available upon request for critical applications.
- Konmask.com specializes in industrial automation components for B2B procurement engineers — accuracy and authenticity are non-negotiable.
Procurement Process
- Confirm compatibility: Verify your proximitor model (3300 XL series) and cable length requirement (18″) match this part number.
- Request a quote: Contact support@konmask.com for volume pricing, lead time, and documentation packages.
- Place order: Secure checkout via Konmask.com. Payment by T/T, credit card, or PayPal accepted.
- Shipping: Global express shipping (DHL / FedEx / UPS). Export documentation and commercial invoice provided.
- After-sales support: Technical assistance available post-delivery for installation and commissioning queries.
Technical FAQ
Q: Is this a complete system or probe only?
A: This is a complete probe + extension cable assembly (330104-07-18-10-01-00). The proximitor/driver (e.g., 330180 series) is sold separately.
Q: What proximitor is compatible with this probe?
A: The 3300 XL series proximitors (e.g., 330180-X1-05) are the designed counterpart. Confirm the cable length and tip size match your proximitor’s calibration.
Q: Can this probe measure non-steel targets?
A: Yes, but a target-specific calibration curve is required. Standard calibration is for AISI 4140 steel. Contact us for alternative target material calibration data.
Q: What is the lead time for this part?
A: In-stock units ship within 1–3 business days. Contact us for current inventory status and expedited options.
Q: Do you provide a warranty?
A: Yes. All units carry a 90-day functional warranty. Extended warranty and exchange programs available for volume orders.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






