Bently Nevada 330104-09-19-10-02-00 – Eddy Current Proximity Transducer System | 3300 XL Series
Engineering Background: The Bently Nevada 3300 XL Proximity Transducer System is the industry benchmark for non-contact shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system is deployed globally in critical turbomachinery protection applications where measurement accuracy and long-term reliability are non-negotiable.
Product Positioning: Part number 330104-09-19-10-02-00 is a complete eddy-current transducer system comprising a 5 mm probe tip, 5 m (19 ft) integral cable, and a 2 m (6.5 ft) extension cable, designed for direct integration with Bently Nevada 3300 XL signal conditioning drivers. It is the preferred choice for procurement engineers specifying vibration monitoring on steam turbines, gas compressors, pumps, and gearboxes.
Complete Technical Specifications
- Part Number: 330104-09-19-10-02-00
- Series / Platform: Bently Nevada 3300 XL Proximity Transducer System
- Probe Tip Diameter: 5 mm (0.197 in)
- Integral Cable Length: 5 m (19 ft)
- Extension Cable Length: 2 m (6.5 ft)
- Total System Cable: 7 m (22.9 ft)
- Supply Voltage: –24 VDC (nominal)
- Output: –200 mV/mil (–7.87 V/mm) scale factor
- Linear Range: 10–90 mil (0.25–2.29 mm)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Target Material: AISI 4140 steel (standard); other alloys with correction factor
- Operating Temperature: –35°C to +177°C (probe); –35°C to +66°C (driver)
- Connector Type: Integral coaxial, reverse-polarity protected
- Approvals / Standards: API 670, CE, FM, CSA, ATEX (Zone 1)
- Weight: ~80 g (probe + cable assembly)
- Country of Origin: USA
Proven Application Environments
- Steam turbine shaft radial vibration and axial position monitoring
- Gas turbine and compressor train protection systems
- Centrifugal pump and motor bearing displacement measurement
- Gearbox and expander differential expansion monitoring
- Petrochemical, LNG, power generation, and refinery critical machinery
- Direct replacement for legacy 3300 series probes in existing installations
Engineering Advantages
- API 670 Compliant: Meets the most stringent machinery protection standard for critical rotating equipment
- High-Temperature Probe: Rated to 177°C for hot-section turbine installations without derating
- Broadband Frequency Response: DC to 10 kHz captures both slow-roll runout and high-frequency sub-synchronous events
- Plug-and-Play Compatibility: Direct system match with 3300 XL drivers (330180, 330185) — no recalibration required
- Robust Coaxial Cable: Armored integral cable resists EMI, mechanical abrasion, and process fluid ingress
- Long-Term Stability: Eddy-current technology provides drift-free measurement over multi-year service intervals
System Architecture & Signal Flow
The 330104-09-19-10-02-00 operates as part of a three-component eddy-current loop:
- Probe (330104 series): Generates a high-frequency electromagnetic field at the tip; gap changes modulate the field impedance.
- Extension Cable (330130 series): Transmits the modulated RF signal from the probe to the driver with minimal loss.
- Driver / Oscillator-Demodulator (330180/330185): Converts the impedance modulation into a calibrated DC voltage output (–200 mV/mil) for the monitoring system (e.g., System 1, 3500 rack).
The complete system is factory-matched and calibrated as a unit. Substituting individual components from different system families will invalidate the scale factor and may cause false trips.
Sourcing & Quality Verification
- Source: Konmask.com sources 330104-09-19-10-02-00 from authorized distributors and verified surplus channels with full traceability documentation.
- Inspection: Each unit undergoes visual inspection, connector integrity check, and cable continuity verification prior to shipment.
- Documentation: Certificate of conformance, original manufacturer datasheet, and packing list provided with every order.
- Counterfeit Mitigation: All units are cross-referenced against Bently Nevada part number databases; suspected non-genuine units are quarantined and not sold.
Procurement Process
- Confirm part number 330104-09-19-10-02-00 against your BOM or existing installation drawing.
- Verify driver compatibility (3300 XL driver required; not compatible with 3300 NSv or 7200 series without recalibration).
- Submit purchase order or RFQ to support@konmask.com with required quantity and delivery timeline.
- Receive order confirmation, pro-forma invoice, and lead-time commitment within 1 business day.
- Shipment via DHL Express / FedEx International Priority with full tracking and export documentation.
Technical FAQ
Q: Is 330104-09-19-10-02-00 compatible with the Bently Nevada 3500 monitoring rack?
A: Yes. The 3300 XL transducer system is fully compatible with 3500 series monitor cards when used with the appropriate 3300 XL driver. The –200 mV/mil output is the standard input expected by 3500/40M and 3500/42M proximity monitor cards.
Q: Can this probe measure non-ferrous targets such as aluminum or titanium?
A: Yes, but a target material correction factor must be applied. Bently Nevada provides correction factor tables for common alloys. Contact our engineering team for application-specific guidance.
Q: What is the difference between the 330104 and 330105 probe series?
A: The 330104 uses a 5 mm tip diameter optimized for standard shaft diameters (50–300 mm). The 330105 uses an 8 mm tip for larger shaft diameters or longer gap ranges. Both are 3300 XL system-compatible.
Q: Do you provide calibration certificates?
A: We provide the original manufacturer’s certificate of conformance. If a site-specific calibration certificate is required, we can arrange third-party NIST-traceable calibration at additional cost.
Q: What is the lead time for 330104-09-19-10-02-00?
A: In-stock units ship within 1–3 business days. For larger quantities or urgent requirements, contact us directly for availability confirmation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






