Bently Nevada 330104-10-18-10-02-00 Proximity Transducer System – 3300 XL Series
When a critical rotating machine loses its vibration monitoring capability, the consequences cascade rapidly: undetected shaft displacement, bearing failures, and ultimately catastrophic machinery damage that can halt production for days or weeks. In high-stakes environments — power generation turbines, petrochemical compressors, marine propulsion systems — the absence of a reliable proximity transducer is not merely an inconvenience; it is a safety and financial liability measured in tens of thousands of dollars per hour of unplanned downtime. The Bently Nevada 330104-10-18-10-02-00 Proximity Transducer System exists precisely to eliminate that risk.
The 330104-10-18-10-02-00 is a member of Bently Nevada’s globally trusted 3300 XL Series — the industry benchmark for eddy-current proximity sensing in rotating machinery protection. Within the 3300 XL family, this specific configuration features a 5 mm diameter probe tip, an 18-inch (457 mm) armored extension cable, and a 10-foot (3 m) integral cable, making it the preferred choice for installations requiring moderate cable reach with compact probe geometry. Bently Nevada proximity systems are specified by OEMs and end-users across six continents, and the 3300 XL Series is recognized by API 670 as the standard for machinery protection instrumentation.
Technical Specifications
- Part Number: 330104-10-18-10-02-00
- Series: 3300 XL Proximity Transducer System
- Probe Tip Diameter: 5 mm
- Extension Cable Length: 18 inches (457 mm)
- Integral Cable Length: 10 feet (3 m)
- Sensing Technology: Eddy-current (non-contact)
- Output: -24 VDC nominal bias voltage; linear output proportional to gap distance
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: -35°C to +121°C (probe); -35°C to +66°C (driver)
- Target Material: AISI 4140 steel (standard); other ferrous/non-ferrous targets available
- Connector: Standard Bently Nevada coaxial connector
- Compliance: API 670, CE, RoHS
- Weight: Approx. 80 g
Key Features & Benefits
- Non-contact measurement — zero mechanical wear, indefinite service life under normal conditions
- Wide frequency response (DC–10 kHz) — captures both slow-roll runout and high-frequency vibration events
- API 670 compliant — meets the most stringent international machinery protection standards
- Armored extension cable — resists mechanical damage in harsh industrial environments
- Direct drop-in replacement — fully compatible with existing 3300 XL driver/monitor infrastructure
- Stable thermal performance — maintains calibration accuracy across wide temperature swings
- Plug-and-play installation — standard coaxial connectors reduce commissioning time
Industry & Equipment Applications
- Power Generation: Steam turbines, gas turbines, hydro generators — shaft radial vibration and axial position monitoring
- Oil & Gas: Centrifugal compressors, reciprocating compressors, pipeline pumps
- Petrochemical & Refining: Process compressors, reactor agitators, extruder drives
- Marine & Offshore: Propulsion shafting, auxiliary machinery
- Pulp & Paper / Steel Mills: Large motor-driven fans, rolling mill drives
- Water & Wastewater: High-speed pump monitoring
System Integration & Compatible Parts
The 330104-10-18-10-02-00 probe system is designed to work seamlessly within the Bently Nevada 3300 XL ecosystem. Compatible components include:
- Drivers: 3300 XL 8 mm Driver (330180 series), 3300 XL 5 mm Driver (330104 driver modules)
- Monitors: 3500/40M Proximitor/Seismic Monitor, 3500/42M Proximitor/Seismic Monitor
- Barriers: Bently Nevada Zener barriers for hazardous area installations
- Cables: 330130 series armored extension cables (alternative lengths)
- Mounting Hardware: Standard Bently Nevada probe holders and brackets
If you need assistance selecting compatible drivers or monitors for your specific machine train, our engineering team is available to support your system design.
Our Quality Assurance Process
At Konmask.com, every Bently Nevada 330104-10-18-10-02-00 unit we supply undergoes a rigorous multi-stage verification process before shipment:
- Source verification: Units sourced exclusively from authorized distributors or verified surplus channels with full traceability documentation
- Visual inspection: Probe tip, cable jacket, connector, and labeling checked against OEM specifications
- Functional check: Electrical continuity and coaxial impedance verified
- Packaging: Anti-static, moisture-resistant packaging with individual part number labeling
- Documentation: Certificate of conformance and test report available upon request
How to Order
- Submit your inquiry via the Contact Us form or email support@konmask.com
- Provide your required quantity, delivery timeline, and destination country
- Receive a formal quotation within 24 business hours
- Confirm order and arrange payment via T/T, L/C, or other agreed terms
- Shipment dispatched with full tracking and export documentation
For urgent requirements or large-volume orders, please call us directly at +0086 19859288691.
Why Choose Konmask.com?
- Industrial automation specialists — focused exclusively on PLC, DCS, and instrumentation components
- Global sourcing network — access to both new and certified surplus Bently Nevada inventory
- Fast response — quotations within 24 hours, expedited shipping available
- Technical support — engineering team with hands-on experience in rotating machinery protection systems
- Secure transactions — established export procedures, compliant documentation, and reliable logistics partners
- Long-term partnership — we support your procurement from first inquiry through post-delivery follow-up
Frequently Asked Questions
Q: Is the 330104-10-18-10-02-00 a new or refurbished unit?
A: We supply both new (factory-sealed) and certified surplus units depending on availability. The condition is clearly stated in your quotation. All units pass our QA process regardless of condition.
Q: Can this probe replace my existing 330104 series probe without recalibration?
A: Yes. The 330104-10-18-10-02-00 is a direct replacement within the 3300 XL system. It uses the same calibration curve as other 330104 probes when paired with the correct driver. Verify your gap setting after installation per Bently Nevada installation procedures.
Q: What is the lead time for this part?
A: Lead time varies by stock availability. In-stock units typically ship within 3–5 business days. For out-of-stock items, lead time is 2–6 weeks. Contact us for real-time availability.
Q: Do you provide export documentation for international shipments?
A: Yes. We provide commercial invoice, packing list, certificate of origin, and any other documentation required for customs clearance in your destination country.
Q: What warranty do you offer?
A: We offer a 90-day warranty against defects in materials and workmanship for all units supplied. Extended warranty options are available — please inquire at the time of order.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
{
“@context”: “https://schema.org”,
“@graph”: [
{
“@type”: “Product”,
“name”: “Bently Nevada 330104-10-18-10-02-00 Proximity Transducer System”,
“description”: “Bently Nevada 330104-10-18-10-02-00 Proximity Transducer System, 3300 XL Series, 5mm probe tip, 18-inch extension cable, 10-foot integral cable. API 670 compliant eddy-current non-contact vibration measurement for rotating machinery protection.”,
“sku”: “330104-10-18-10-02-00”,
“mpn”: “330104-10-18-10-02-00”,
“brand”: {
“@type”: “Brand”,
“name”: “Bently Nevada”
},
“manufacturer”: {
“@type”: “Organization”,
“name”: “Bently Nevada (Baker Hughes)”
},
“category”: “Proximity Transducer System”,
“url”: “https://konmask.com/products/bently-nevada-330104-10-18-10-02-00-proximity-transducer-system”,
“image”: “https://konmask.com/products/bently-nevada-330104-10-18-10-02-00-proximity-transducer-system”,
“offers”: {
“@type”: “Offer”,
“url”: “https://konmask.com/products/bently-nevada-330104-10-18-10-02-00-proximity-transducer-system”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {
“@type”: “Organization”,
“name”: “Konmask.com”
}
}
},
{
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “Is the 330104-10-18-10-02-00 a new or refurbished unit?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “We supply both new (factory-sealed) and certified surplus units depending on availability. The condition is clearly stated in your quotation. All units pass our QA process regardless of condition.”
}
},
{
“@type”: “Question”,
“name”: “Can this probe replace my existing 330104 series probe without recalibration?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. The 330104-10-18-10-02-00 is a direct replacement within the 3300 XL system. It uses the same calibration curve as other 330104 probes when paired with the correct driver. Verify your gap setting after installation per Bently Nevada installation procedures.”
}
},
{
“@type”: “Question”,
“name”: “What is the lead time for this part?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Lead time varies by stock availability. In-stock units typically ship within 3–5 business days. For out-of-stock items, lead time is 2–6 weeks. Contact us for real-time availability.”
}
},
{
“@type”: “Question”,
“name”: “Do you provide export documentation for international shipments?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. We provide commercial invoice, packing list, certificate of origin, and any other documentation required for customs clearance in your destination country.”
}
},
{
“@type”: “Question”,
“name”: “What warranty do you offer?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “We offer a 90-day warranty against defects in materials and workmanship for all units supplied. Extended warranty options are available — please inquire at the time of order.”
}
}
]
}
]
}






