Bently Nevada 330901-00-90-10-02-CN Non-Contact Vibration Measurement – 3300 XL NSv Proximity Transducer System
Imagine a critical rotating machine — a steam turbine, compressor, or pump — running at full load with no reliable shaft vibration data. Without a precision proximity probe, early-stage rotor instability, oil whirl, or shaft misalignment goes undetected until catastrophic failure occurs. Unplanned downtime in heavy industry can cost tens of thousands of dollars per hour. The Bently Nevada 330901-00-90-10-02-CN NSv Proximity Probe eliminates this risk by delivering continuous, non-contact shaft displacement measurements with micron-level accuracy, forming the first line of defense in your machinery protection strategy.
The 330901-00-90-10-02-CN is a member of the Bently Nevada 3300 XL NSv (Non-Standard voltage) Proximity Transducer System — one of the most widely deployed eddy-current sensing platforms in global industrial automation. Engineered to operate in harsh environments with extended temperature ranges and chemical resistance, this probe is the preferred choice for OEM integrators, plant engineers, and reliability teams across oil & gas, power generation, petrochemical, and rotating machinery sectors worldwide. Its -CN suffix designates a specific cable length and connector configuration optimized for panel-mount and field-retrofit installations.
Technical Specifications
- Part Number: 330901-00-90-10-02-CN
- Series: 3300 XL NSv Proximity Transducer System
- Manufacturer: Bently Nevada (Baker Hughes)
- Sensing Technology: Eddy Current (Non-Contact)
- Probe Tip Diameter: 8 mm
- Cable Length: 90 cm (probe) + 10 m (extension)
- Connector Type: CN (per suffix designation)
- Linear Range: 2.0 mm (typical for 8 mm tip)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: -35°C to +177°C (probe body)
- Target Material: AISI 4140 steel (standard)
- Agency Approvals: CE, ATEX (consult datasheet for zone ratings)
- Compatible Driver/Monitor: 3300 XL NSv Driver, Bently Nevada 3500 Series
Note: All specifications are based on published Bently Nevada documentation. Verify against the official datasheet for your specific application.
Key Features & Benefits
- Non-Contact Measurement: Zero mechanical wear — continuous operation without sensor degradation over millions of shaft rotations.
- High-Frequency Response (DC–10 kHz): Captures both slow-roll runout and high-speed dynamic events in a single channel.
- NSv System Compatibility: Plug-and-play replacement within existing 3300 XL NSv installations — no recalibration of the driver required when using matched system components.
- Chemically Resistant Construction: Probe body and cable rated for exposure to lubricating oils, hydraulic fluids, and common industrial solvents.
- Extended Cable Configuration: The -00-90-10 cable build (90 cm probe + 10 m extension) suits most standard bearing housing-to-junction-box distances without field splicing.
- API 670 Compliant: Meets the machinery protection standard required by most EPC contractors and plant operators in oil & gas.
- Direct Replacement: Drop-in compatible with legacy 3300 series installations, protecting your existing infrastructure investment.
Industry & Equipment Applications
- Oil & Gas: Centrifugal compressors, gas turbines, pipeline pumps — radial and axial shaft vibration monitoring per API 670.
- Power Generation: Steam turbines, hydro generators — shaft displacement and eccentricity measurement for predictive maintenance.
- Petrochemical & Refining: Reactor agitators, boiler feed pumps — continuous condition monitoring in hazardous area installations.
- Pulp & Paper / Steel: High-speed rolls and drive trains — detecting imbalance and bearing defects before production loss.
- Marine & Offshore: Propulsion shafting and auxiliary machinery — vibration surveillance in space-constrained environments.
System Integration & Compatible Parts
The 330901-00-90-10-02-CN is designed to operate as part of a complete Bently Nevada 3300 XL NSv transducer system. Typical companion components include:
- Extension Cable: 330130-045-00-CN / 330130-080-00-CN (matched to probe cable length)
- NSv Driver: 330180-X1-05 (mounts in standard DIN rail or rack enclosure)
- Monitoring System: Bently Nevada 3500/40M, 3500/42M, or 3500/45 Position Monitor
- Barrier / Isolator: Required for ATEX Zone 1 installations — consult Bently Nevada system drawing
- Mounting Hardware: Proximity probe holder, lock nut, and armored conduit fittings
Konmask.com stocks a broad range of Bently Nevada 3300 XL and 3500 Series components. Contact us to source a complete matched system.
Our Quality Assurance Process
Every Bently Nevada component shipped from Konmask.com goes through a documented verification process:
- Visual inspection of probe tip, cable jacket, and connector for physical integrity
- Label and part number cross-check against purchase documentation
- Packaging inspection to confirm factory-sealed or properly repackaged condition
- Traceability documentation available upon request (COC, test reports where applicable)
We source from authorized distribution channels and vetted surplus inventories. All products are sold with a clear representation of their condition (new, surplus-new, or refurbished).
How to Order
- Submit an inquiry via the Contact Us form or email support@konmask.com with your part number and required quantity.
- Receive a formal quotation with lead time, condition, and shipping options within 24 business hours.
- Confirm the order — we accept T/T bank transfer, PayPal, and other B2B payment methods.
- Shipment with tracking number and commercial invoice provided for customs clearance.
Urgent requirements? Call or WhatsApp: +0086 19859288691
Why Choose Konmask.com?
- Industrial Automation Specialists: We focus exclusively on PLC, DCS, drives, and condition monitoring components — not a general electronics marketplace.
- Global Sourcing Network: Access to both current-production and obsolete Bently Nevada parts that are no longer available through standard distribution.
- Technical Pre-Sales Support: Our team can verify compatibility with your existing system before you commit to a purchase.
- Fast International Shipping: DHL, FedEx, and UPS express options to over 100 countries, with full export documentation.
- Transparent Condition Reporting: We clearly state whether parts are new, surplus-new, or refurbished — no ambiguity.
Frequently Asked Questions
- Q: Is the 330901-00-90-10-02-CN a direct replacement for the older 330901-00-90-10-02?
- A: The -CN suffix denotes a specific connector configuration. In most cases it is mechanically and electrically compatible, but verify the connector type matches your junction box or driver input before ordering.
- Q: Can this probe be used with a Bently Nevada 3500 monitoring rack?
- A: Yes. The 3300 XL NSv probe system is compatible with the 3500 Series monitors when used with the appropriate NSv driver module. Confirm the driver part number with your system drawing.
- Q: What is the lead time for this part?
- A: Lead time depends on current stock. Contact us for real-time availability. In-stock items typically ship within 2–3 business days.
- Q: Do you provide a certificate of conformance?
- A: Yes, a COC is available upon request for most items. Please specify your documentation requirements when submitting your inquiry.
- Q: Can Konmask.com supply the complete 3300 XL NSv system (probe + extension + driver)?
- A: Yes. We can source and supply matched system components. Provide your system drawing or monitor card part number and we will configure the correct assembly.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
{
“@context”: “https://schema.org”,
“@graph”: [
{
“@type”: “Product”,
“name”: “Bently Nevada 330901-00-90-10-02-CN NSv Proximity Probe”,
“description”: “Bently Nevada 330901-00-90-10-02-CN 8mm eddy-current proximity probe, part of the 3300 XL NSv Proximity Transducer System. Non-contact shaft vibration measurement for rotating machinery protection.”,
“sku”: “330901-00-90-10-02-CN”,
“mpn”: “330901-00-90-10-02-CN”,
“brand”: {
“@type”: “Brand”,
“name”: “Bently Nevada”
},
“manufacturer”: {
“@type”: “Organization”,
“name”: “Bently Nevada (Baker Hughes)”
},
“category”: “Proximity Probe / Eddy Current Sensor”,
“url”: “https://konmask.com/products/bently-nevada-330901-00-90-10-02-cn-nsv-proximity-probe”,
“image”: [
“https://cdn.shopify.com/s/files/1/0740/1111/5686/files/cpl21evbkm0125219.jpg”,
“https://cdn.shopify.com/s/files/1/0740/1111/5686/files/b4gvluvzta2125219.jpg”,
“https://cdn.shopify.com/s/files/1/0740/1111/5686/files/ynbez5qalyx125219.jpg”
],
“offers”: {
“@type”: “Offer”,
“url”: “https://konmask.com/products/bently-nevada-330901-00-90-10-02-cn-nsv-proximity-probe”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {
“@type”: “Organization”,
“name”: “Konmask.com”
}
}
},
{
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “Is the 330901-00-90-10-02-CN a direct replacement for the older 330901-00-90-10-02?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The -CN suffix denotes a specific connector configuration. In most cases it is mechanically and electrically compatible, but verify the connector type matches your junction box or driver input before ordering.”
}
},
{
“@type”: “Question”,
“name”: “Can this probe be used with a Bently Nevada 3500 monitoring rack?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. The 3300 XL NSv probe system is compatible with the 3500 Series monitors when used with the appropriate NSv driver module. Confirm the driver part number with your system drawing.”
}
},
{
“@type”: “Question”,
“name”: “What is the lead time for this part?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Lead time depends on current stock. Contact us for real-time availability. In-stock items typically ship within 2–3 business days.”
}
},
{
“@type”: “Question”,
“name”: “Do you provide a certificate of conformance?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes, a COC is available upon request for most items. Please specify your documentation requirements when submitting your inquiry.”
}
},
{
“@type”: “Question”,
“name”: “Can Konmask.com supply the complete 3300 XL NSv system?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. We can source and supply matched system components. Provide your system drawing or monitor card part number and we will configure the correct assembly.”
}
}
]
}
]
}
