Bently Nevada 330904-00-10-05-01-00 3300 XL NSv Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330904-00-10-05-01-00 is a complete 3300 XL NSv Proximity Transducer System designed for continuous, non-contact vibration and position monitoring of rotating machinery. This system is widely deployed in turbines, compressors, pumps, and motors across oil & gas, power generation, and heavy industrial environments. Konmask.com supplies genuine and compatible units with full traceability.
Technical Specifications
- Part Number: 330904-00-10-05-01-00
- Series: 3300 XL NSv (Non-Standard voltage)
- Manufacturer: Bently Nevada (Baker Hughes)
- Sensor Type: Eddy-Current Proximity Transducer
- Probe Cable Length: 1.0 m (extension cable 5.0 m)
- Output Voltage Range: -1 VDC to -17 VDC (standard)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: -35°C to +121°C (probe); -35°C to +66°C (driver)
- Supply Voltage: -24 VDC nominal
- Connector: Integral coaxial, reverse-polarity protected
- Approvals: CE, FM, CSA (refer to datasheet for full listing)
- Weight: Approx. 140 g
Compatible Replacement & Equivalent Models
The table below lists direct replacements and functional equivalents for the 330904-00-10-05-01-00. Always verify gap voltage, sensitivity, and cable length before substituting.
- 330900-00-10-05-01-00 — 3300 XL Standard Proximity Transducer (same form factor, standard voltage output)
- 330901-00-10-05-01-00 — 3300 XL 8 mm Proximity Transducer System (shorter range, verify gap)
- 330903-00-10-05-01-00 — 3300 XL 11 mm Proximity Transducer System (wider gap range)
- 330905-00-10-05-01-00 — 3300 XL 25 mm Proximity Transducer System (large shaft applications)
- 3300 XL 8 mm / 11 mm / 25 mm Series — Functional equivalents depending on target material and gap requirements
- Emerson / GE Bently Nevada OEM equivalents — Confirm part suffix compatibility with your monitor rack
Note: NSv (Non-Standard voltage) variants require compatible driver/monitor cards. Do not substitute with standard voltage models without verifying system compatibility.
Why Choose the Original Model
- Factory-calibrated sensitivity (7.87 V/mm) ensures measurement accuracy without field recalibration
- Designed and validated for Bently Nevada 3300 XL monitor racks — plug-and-play replacement
- Certified for hazardous area installations (FM/CSA intrinsic safety options)
- Long-term availability through Konmask.com with full documentation and traceability
- Backed by Baker Hughes / Bently Nevada quality standards and global installed base
Typical Applications
- Steam and gas turbine shaft vibration and eccentricity monitoring
- Centrifugal and reciprocating compressor radial vibration measurement
- Pump and motor bearing displacement monitoring
- Gearbox and fan shaft position sensing
- Critical machinery protection systems in oil & gas, petrochemical, and power plants
System Compatibility
- Monitor Racks: Bently Nevada 3300 XL Series (3300/16, 3300/20, 3300/25, 3300/46, 3300/55)
- Driver/Oscillator: 3300 XL NSv Driver (must match NSv output range)
- Extension Cable: 330130 Series (5 m standard, custom lengths available)
- Target Materials: AISI 4140 steel, 4340 steel, Inconel 718 (verify scale factor for non-standard materials)
- DCS / Safety Systems: Compatible with 4–20 mA converters and Bently Nevada System 1 software
Selection Guide
Use the following criteria to confirm the correct model for your application:
- Gap Range: Confirm the required linear range (typically 0.25 mm – 2.25 mm for 8 mm probes)
- Cable Length: Probe 1.0 m + Extension 5.0 m = 6.0 m total (suffix -10-05 = 1.0 m probe / 5.0 m extension)
- Output Type: NSv (-01) vs. Standard (-00) — must match your driver card
- Target Material: Standard calibration is for AISI 4140; request special scale factor for other materials
- Hazardous Area: Confirm IS (Intrinsic Safety) or non-IS version per your area classification
- Connector Style: Verify coaxial connector compatibility with existing cabling
If unsure, contact Konmask.com with your existing part number and monitor rack model — our engineers will confirm the correct replacement.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or directly from Baker Hughes / Bently Nevada
- Each unit inspected and tested prior to shipment
- Full documentation available: datasheet, calibration certificate, country of origin
- Genuine OEM parts — no counterfeit or grey-market supply
- Secure packaging with ESD protection for sensitive electronics
How to Order
- Part Number: 330904-00-10-05-01-00
- Quantity: Single unit or bulk orders accepted
- Lead Time: In-stock units ship within 1–3 business days; ex-stock lead time 2–4 weeks
- Payment: T/T, PayPal, credit card, and trade terms for qualified accounts
- Shipping: DHL, FedEx, UPS worldwide; export documentation provided
- Contact us for volume pricing, spare parts kits, or system-level quotations
Replacement & Compatibility FAQ
Q: Can I replace 330904-00-10-05-01-00 with a standard (non-NSv) 3300 XL probe?
A: No. NSv probes have a different output voltage range and require NSv-compatible driver cards. Substituting with a standard probe will result in incorrect readings and may trigger false alarms.
Q: What does the suffix -00-10-05-01-00 mean?
A: The suffix encodes: probe cable length (1.0 m), extension cable length (5.0 m), output type (NSv = -01), and connector/approval options. Always quote the full part number when ordering.
Q: Is this probe compatible with Bently Nevada System 1 software?
A: Yes, when used with a compatible 3300 XL monitor rack and properly configured I/O, the output integrates with System 1 condition monitoring software.
Q: Can Konmask.com supply the full transducer system (probe + extension + driver)?
A: Yes. We can supply individual components or complete kitted systems. Contact us with your rack model and we will configure the correct system.
Q: What is the warranty on this product?
A: We offer a 12-month warranty against manufacturing defects. Contact support@konmask.com for warranty claims.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
