Turbomachinery Vibration Monitoring Solution – Bently Nevada 330904-00-13-50-02-00 | 3300 XL Series
The Bently Nevada 330904-00-13-50-02-00 is a high-precision proximity transducer system from the 3300 XL NSv (Non-contact Shaft Vibration) series, engineered for continuous, real-time shaft vibration and position measurement in critical rotating machinery. Trusted by reliability engineers and OEM integrators worldwide, this transducer system delivers the accuracy and stability demanded by API 670-compliant monitoring installations.
Where This Product Is Used
- Steam & Gas Turbines — Shaft radial vibration and axial position monitoring in power generation turbines
- Centrifugal Compressors — Real-time rotor displacement measurement in petrochemical and refinery compressor trains
- Pumps & Fans — Continuous bearing journal monitoring in large BFW pumps and induced-draft fans
- Gearboxes — Gear mesh frequency and shaft orbit analysis in high-speed gearbox applications
- Expanders & Turbines — Cryogenic and high-temperature expander shaft monitoring in LNG and ethylene plants
- Marine Propulsion Systems — Shaft vibration surveillance in ship propulsion and auxiliary machinery
Technical Specifications
- Part Number: 330904-00-13-50-02-00
- Series: 3300 XL NSv (Non-contact Shaft Vibration)
- Brand: Bently Nevada (Baker Hughes)
- Transducer Type: Eddy-current proximity transducer
- Cable Length: 5.0 m (extension cable)
- Probe Tip Diameter: 8 mm
- Measurement Range: 0–2.0 mm (0–80 mil)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Operating Temperature: −35°C to +177°C (probe); −35°C to +85°C (driver)
- Output Signal: DC voltage proportional to gap distance
- Target Material: AISI 4140 steel or equivalent
- Connector: MIL-C-5015 style
- Approvals: CE, ATEX, IECEx (consult datasheet for zone classification)
Why Engineers Specify This Model
- NSv Technology: Optimized for non-contact shaft vibration with superior noise immunity versus standard eddy-current probes
- API 670 Compliance: Meets the machinery protection standard required by EPC contractors and end-users in oil & gas
- Plug-and-Play with 3300 XL Monitors: Direct compatibility with Bently Nevada 3300 XL rack-mounted monitors eliminates calibration overhead
- Wide Temperature Range: Suitable for both cryogenic and high-temperature process environments
- Long-Term Stability: Thermally compensated design maintains scale factor accuracy over the full operating life
- Hazardous Area Rated: ATEX/IECEx certification supports installation in Zone 1 and Zone 2 classified areas
Complete System Bill of Materials
- 330904-00-13-50-02-00 — NSv Proximity Transducer Probe (8 mm, 5 m cable)
- 330130-040-00-00 — Extension Cable (typical; verify per installation drawing)
- 330180-X1-05 — Proximitor® Driver / Signal Conditioner
- 3300/16 or 3300/20 — 3300 XL Monitor Module (rack-mounted)
- 3300/05-01-00-00 — Power Supply Module
- 3300/93 — I/O Module (for DCS/PLC integration)
Note: BOM components should be verified against your system architecture drawing. Contact Konmask for complete system quotations.
Compliance & Industry Standards
- API 670 — Machinery Protection Systems (5th Edition)
- IEC 61511 — Functional Safety for Process Industry (SIL-capable installations)
- ATEX Directive 2014/34/EU — Equipment for explosive atmospheres
- IECEx Scheme — International certification for Ex equipment
- CE Marking — EU market conformity
- ISO 10816 / ISO 20816 — Mechanical vibration evaluation standards
Quality Assurance & Sourcing
Konmask.com sources the Bently Nevada 330904-00-13-50-02-00 through verified industrial distribution channels. Every unit undergoes incoming inspection including:
- Visual and dimensional verification against OEM datasheet
- Label and serial number authenticity check
- Functional continuity and insulation resistance test
- Secure anti-static packaging for transit protection
We supply both new surplus and factory-new stock. Condition is clearly stated on each order confirmation. Calibration certificates and OEM documentation are available upon request.
How to Source This Part
- In-Stock Orders: Add to cart and check out — most orders ship within 1–3 business days
- Bulk / Project Quotations: Email support@konmask.com with your BOM and required delivery schedule
- Urgent Requirements: Call or WhatsApp +0086 19859288691 for same-day response on critical plant shutdowns
- Export & Cross-Border: We ship globally with full commercial invoice, packing list, and HS code documentation
Application-Specific FAQ
Q: Is the 330904-00-13-50-02-00 compatible with the 3500 series monitors?
A: No. This probe is designed for the 3300 XL platform. For 3500 series compatibility, the 330900 or 190500 series probes are typically specified. Contact us to confirm your monitor model.
Q: What is the difference between NSv and standard 3300 XL probes?
A: NSv (Non-contact Shaft Vibration) probes incorporate enhanced signal conditioning optimized for shaft vibration measurement, offering improved noise rejection compared to standard proximity probes used for position sensing.
Q: Can this transducer be used in a Zone 0 hazardous area?
A: No. ATEX/IECEx certification for this model covers Zone 1 and Zone 2. For Zone 0 applications, consult Bently Nevada for intrinsically safe barrier configurations.
Q: What target material is required for accurate measurement?
A: The probe is calibrated for AISI 4140 steel. Other target materials (stainless steel, titanium, Inconel) will require a material correction factor — refer to the Bently Nevada calibration guide or contact our technical team.
Q: Do you provide a warranty?
A: Yes. Konmask offers a 90-day functional warranty on all parts. Extended warranty and exchange programs are available for project accounts.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
