Rotating Machinery Vibration Monitoring Solution – Bently Nevada 330910-00-17-05-01-00 | 3300 XL Series
Where This Product Is Used
The Bently Nevada 330910-00-17-05-01-00 Proximity Transducer System is engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in high-speed rotating machinery. Typical deployment environments include:
- Steam & Gas Turbines – Real-time shaft orbit and eccentricity monitoring to prevent catastrophic bearing failure.
- Centrifugal Compressors – Radial vibration surveillance on both drive-end and non-drive-end journal bearings.
- Pumps & Fans – Early detection of rotor imbalance, misalignment, and rub conditions.
- Gearboxes – Gear mesh frequency analysis and shaft position trending.
- Marine Propulsion Systems – Continuous shaft monitoring in harsh, salt-spray environments.
- Power Generation Plants – Integration with DCS/SCADA for plant-wide machinery health dashboards.
Technical Specifications
- Part Number: 330910-00-17-05-01-00
- Series: Bently Nevada 3300 XL
- Sensor Type: Eddy-Current Proximity Transducer
- Probe Tip Diameter: 8 mm
- Cable Length: 5 m (standard; see BOM for extension options)
- Measurement Range: 0–2 mm (linear range)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: −35 °C to +177 °C (probe); −35 °C to +66 °C (driver)
- Supply Voltage: −24 VDC (nominal)
- Output: −2 VDC to −18 VDC (proportional to gap)
- Connector: Integral coaxial, stainless-steel armored cable
- Weight: 140 g (probe + cable assembly)
- Ingress Protection: IP67 (probe tip)
Why Engineers Specify This Model
- API 670 Compliant – Meets the industry standard for machinery protection systems, accepted by EPC contractors and end-users worldwide.
- 3300 XL System Compatibility – Direct plug-and-play with Bently Nevada 3300 XL monitors (3300/16, 3300/20, 3300/25, 3300/55) without recalibration.
- Extended Temperature Range – Probe rated to 177 °C, suitable for hot-section turbine bearing pedestals.
- Stainless-Steel Armored Cable – Resists mechanical damage, oil, and chemical exposure in refinery and petrochemical environments.
- Factory-Matched System – Probe, extension cable, and driver are calibrated as a matched set, eliminating field calibration errors.
- Long Service Life – Non-contact measurement principle eliminates wear; typical MTBF exceeds 200,000 hours.
Complete System Bill of Materials
- 330910-00-17-05-01-00 – Proximity Transducer Probe (8 mm, 5 m cable) (this listing)
- 330130-080-00-00 – 3300 XL 8 mm Extension Cable (recommended pairing)
- 330180-X1-05 – 3300 XL Proximitor® Driver / Signal Conditioner
- 3300/16-XX-XX-XX-XX – 3300 XL Dual Vibration Monitor (rack card)
- 135489-01 – Mounting Bracket, 8 mm Probe (stainless steel)
Contact Konmask for bundle pricing on complete transducer system kits.
Compliance & Industry Standards
- API 670 (5th Edition) – Machinery Protection Systems
- IEC 61511 – Functional Safety for Process Industry
- ATEX / IECEx Zone 1 & Zone 2 (driver unit)
- CE Marking – EMC Directive 2014/30/EU
- RoHS Compliant
Quality Assurance & Sourcing
Every Bently Nevada 330910-00-17-05-01-00 unit shipped by Konmask undergoes a multi-point inspection protocol:
- Visual inspection for cable jacket integrity, connector seating, and probe tip condition.
- DC output voltage verification at nominal gap (1.0 mm) against factory calibration certificate.
- Continuity and insulation resistance test on coaxial cable assembly.
- Serialized traceability record retained for 5 years.
Units are sourced from authorized Bently Nevada distribution channels and verified OEM surplus stock. Counterfeit-free guarantee backed by inspection documentation available upon request.
How to Source This Part
- In-Stock Orders: Add to cart and check out online. Same-day dispatch for orders placed before 15:00 CST.
- Bulk / Project Quotes: Email support@konmask.com with quantity and delivery schedule for volume pricing.
- Urgent / Emergency Shutdown (ESD) Supply: Call +0086 19859288691 for expedited sourcing and air-freight options.
- Technical Consultation: Our application engineers can verify system compatibility and recommend matched extension cables and drivers at no charge.
Application-Specific FAQ
Q: Is the 330910-00-17-05-01-00 compatible with older 3300 series monitors (non-XL)?
A: The 3300 XL probe is backward-compatible with standard 3300 monitors when used with the correct XL Proximitor driver. Verify monitor firmware version ≥ 2.x for full XL feature support.
Q: Can this probe be used in a Zone 0 hazardous area?
A: No. The 330910 probe is rated for Zone 1/Zone 2 (ATEX/IECEx). For Zone 0 applications, consult Bently Nevada for intrinsically safe barrier options.
Q: What is the maximum shaft surface speed this transducer can measure?
A: The eddy-current principle is non-contact; there is no mechanical surface-speed limit. The 10 kHz frequency response supports shaft speeds up to approximately 600,000 RPM for vibration measurement.
Q: Do I need to recalibrate after replacing a probe?
A: Yes. The probe, extension cable, and driver are a factory-matched system. Replacing any single component requires re-verification of the system sensitivity at the installed gap.
Q: What materials are compatible with the eddy-current measurement?
A: The target shaft must be a conductive, ferromagnetic or non-ferromagnetic metal (steel, stainless steel, titanium). Non-metallic shafts are not measurable.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
