Process Control Solution — Emerson 5X00357G05 | DeltaV Analog Input Module
Where This Product Is Used
The Emerson 5X00357G05 Analog Input Module is deployed across a wide range of process-critical environments where accurate signal acquisition is non-negotiable. Typical application sites include:
- Oil & Gas Upstream/Midstream: Wellhead pressure and temperature monitoring, pipeline flow measurement, and separator level control.
- Chemical & Petrochemical Plants: Reactor temperature profiling, distillation column differential pressure loops, and feed-rate control.
- Power Generation: Boiler drum level, turbine inlet temperature, and combustion air-flow measurement in coal, gas, and combined-cycle plants.
- Pulp & Paper / Water Treatment: pH, conductivity, and dissolved-oxygen loop integration within DeltaV DCS architectures.
- Pharmaceutical & Food & Beverage: CIP/SIP temperature validation and batch reactor monitoring under FDA 21 CFR Part 11 environments.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 5X00357G05 |
| Manufacturer | Emerson Electric / Fisher-Rosemount |
| Series | DeltaV™ I/O |
| Module Type | Analog Input (AI) |
| Input Signal Range | 4–20 mA HART / 1–5 V DC |
| Channel Count | 8 channels (isolated) |
| Resolution | 16-bit A/D conversion |
| Accuracy | ±0.1% of full scale |
| Operating Temperature | 0 °C to +60 °C |
| Storage Temperature | −40 °C to +85 °C |
| Power Consumption | ≤ 3.5 W typical |
| Communication Bus | DeltaV I/O Bus (proprietary) |
| Mounting | DeltaV I/O Carrier / Marshalling Cabinet |
| Weight | Approx. 200 g |
| Certifications | CE, FM, CSA, ATEX (refer to datasheet) |
Note: Specifications are based on Emerson published datasheets. Always verify against the official product documentation for your revision level.
Why Engineers Specify This Model
- HART Pass-Through: Supports HART 5/6/7 protocol, enabling remote device diagnostics and calibration without loop interruption — critical for predictive maintenance programs.
- Channel Isolation: Per-channel galvanic isolation eliminates ground-loop interference in multi-transmitter installations, reducing nuisance trips.
- Seamless DeltaV Integration: Plug-and-play recognition within DeltaV Explorer; no manual address configuration required, minimising commissioning time.
- High-Density I/O: 8 channels per module reduces cabinet footprint and wiring cost compared to legacy single-channel solutions.
- Proven Field Reliability: Emerson DeltaV I/O modules are installed in tens of thousands of process units globally, with documented MTBF exceeding 500,000 hours.
- Hot-Swap Capable: Modules can be replaced under power in redundant controller configurations, supporting zero-downtime maintenance strategies.
Complete System Bill of Materials
For a fully operational DeltaV analog input subsystem, the following companion components are typically required:
- DeltaV Controller (e.g., MD Plus, MD, or S-series) — for loop execution
- DeltaV I/O Carrier / Baseplate — module mounting and bus connectivity
- DeltaV Power Supply (PS2 or PS6) — 24 V DC rail for I/O subsystem
- Marshalling Cabinet / Terminal Blocks — field wiring termination
- HART Multiplexer (optional) — for bulk HART device management
- DeltaV Operate / DeltaV Live HMI License — operator interface
- Shielded Twisted-Pair Cable (per ISA-5.1) — field instrument wiring
Contact [email protected] for bundle pricing on multi-module orders.
Compliance & Industry Standards
- IEC 61511 / ISA-84: Suitable for use in Safety Instrumented Systems (SIS) when applied per Emerson’s SIL assessment documentation.
- IEC 61508: Functional safety compliance for hardware fault tolerance evaluation.
- ATEX / IECEx: Hazardous area certifications available — confirm suffix code for your zone classification.
- CE Marking: Compliant with EU EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.
- FM / CSA: North American approvals for Class I, Division 2 installations.
- ISA-5.1: Instrumentation wiring and signal standards compliance.
Quality Assurance & Sourcing
Konmask.com sources industrial automation components through established supply-chain channels with documented traceability. Our quality process includes:
- Visual & Dimensional Inspection: Every module is inspected against Emerson’s published physical specifications upon receipt.
- Functional Verification: Where test equipment is available, modules undergo power-on verification prior to dispatch.
- Authenticity Screening: Components are cross-referenced against known-good reference units and manufacturer markings to screen for non-genuine parts.
- Traceability Documentation: Batch records and sourcing documentation are retained and available upon request for regulated industries.
- Packaging: ESD-safe anti-static bags, foam-lined cartons, and moisture-barrier packaging for international shipment.
How to Source This Part
- Confirm your revision requirement — check your existing DeltaV system’s I/O carrier compatibility and firmware version before ordering.
- Request a quote — email [email protected] with your required quantity, delivery timeline, and any certification requirements.
- Lead time — in-stock units typically ship within 3–5 business days; ex-stock international orders within 7–14 business days via DHL / FedEx.
- Payment — T/T bank transfer, PayPal, and major credit cards accepted. Net-30 terms available for qualified accounts.
- After-sales support — 90-day warranty on all modules; technical support available via email and WhatsApp.
Application-Specific FAQ
Q: Is the 5X00357G05 compatible with DeltaV version 14.x and later?
A: Compatibility depends on the specific DeltaV system revision and I/O carrier generation. We recommend verifying against Emerson’s DeltaV I/O Compatibility Matrix or contacting our technical team before ordering.
Q: Can this module be used in a Safety Instrumented System (SIS)?
A: The 5X00357G05 is a standard I/O module. For SIS applications, Emerson’s DeltaV SIS platform with dedicated safety I/O modules (e.g., CSLS series) is the appropriate solution. Consult your functional safety engineer.
Q: What is the difference between the G05 and other G-suffix variants?
A: The G-suffix typically denotes hardware revision or regional certification variant. Contact us with your existing system details and we will confirm the correct variant for your installation.
Q: Do you supply the I/O carrier and power supply as a bundle?
A: Yes. We can source complete DeltaV I/O subsystem components. Email us your BOM and we will provide a consolidated quotation.
Q: Is this a new, refurbished, or surplus unit?
A: We supply both new and tested-surplus units depending on availability. Condition is clearly stated on each order confirmation. All units pass our QA inspection process.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
