GE IC600-FP941K Analog Output Module | Replacement, Equivalent & Selection Guide
The GE Fanuc IC600-FP941K is an Analog Output Module designed for the GE Series Six PLC platform. It provides precision analog signal output for process control applications including flow, pressure, temperature, and positioning systems. This page serves as a comprehensive selection, replacement, and compatibility reference for engineers and procurement teams sourcing this module.
Technical Specifications
- Part Number: IC600-FP941K
- Manufacturer: GE Fanuc Automation
- Series: Series Six PLC
- Module Type: Analog Output
- Output Channels: 4 channels (typical for FP941 series)
- Output Signal: 4–20 mA / 0–10 VDC (configurable)
- Resolution: 12-bit
- Power Supply: Backplane-powered via Series Six rack
- Weight: 330 g
- Housing: Standard Series Six module form factor
- Operating Temperature: 0°C to 60°C
- Compliance: CE, UL (refer to original GE documentation for full certifications)
Compatible Replacement & Equivalent Models
When the IC600-FP941K is discontinued or unavailable, the following models may serve as functional equivalents or drop-in replacements depending on your system configuration. Always verify electrical and firmware compatibility before substitution.
| Model | Brand | Type | Compatibility Notes |
|---|---|---|---|
| IC600-FP941 | GE Fanuc | Analog Output | Earlier revision; same form factor |
| IC600-FP942 | GE Fanuc | Analog Output | Higher channel count variant |
| IC693ALG390 | GE Fanuc | Analog Output (Series 90-30) | Different rack; requires adapter or migration |
| IC694ALG222 | GE Fanuc | Analog Output (RX3i) | Next-gen platform; migration project required |
| 1756-OF4 | Allen-Bradley | Analog Output (ControlLogix) | Cross-brand; full system migration required |
Contact support@konmask.com for a verified compatibility assessment before ordering a replacement.
Why Choose the Original IC600-FP941K
- Proven Reliability: Designed and validated for GE Series Six architecture — no integration risk.
- Exact Fit: Plug-and-play into existing Series Six racks without firmware changes.
- Reduced Downtime: Sourcing the original part eliminates re-engineering and re-commissioning time.
- Traceability: Original GE Fanuc part numbers ensure full documentation and audit trail compliance.
- Long Service Life: Industrial-grade components rated for continuous 24/7 operation.
Typical Applications
- Process control: flow rate, pressure, and temperature regulation via 4–20 mA loops
- Valve positioner control in oil & gas and chemical plants
- Variable speed drive (VSD/VFD) reference signal output
- Conveyor and material handling speed control
- Water treatment and SCADA analog output interfaces
- Power generation auxiliary control systems
System Compatibility
- Compatible Racks: GE Series Six IC600 rack family
- Compatible CPUs: IC600-CPU series (Series Six)
- Programming Software: GE Logicmaster 6 / compatible Series Six programming tools
- Bus Interface: Series Six proprietary backplane bus
- Not Compatible With: Series 90-30, Series 90-70, PACSystems RX3i/RX7i racks without hardware migration
Selection Guide
Use the following criteria to confirm the IC600-FP941K is the right module for your application:
- ✅ Your system uses a GE Series Six PLC rack
- ✅ You require analog output (not input) capability
- ✅ Your field devices accept 4–20 mA or 0–10 VDC signals
- ✅ You need a 4-channel output module
- ✅ You are maintaining an existing installation (not migrating to a new platform)
If your requirements differ (e.g., more channels, different signal range, or a newer PLC platform), contact us for an alternative recommendation.
Quality Assurance & Sourcing
- Source: Konmask.com sources IC600-FP941K modules from authorized distributors and verified surplus channels.
- Inspection: Each unit undergoes visual inspection and functional verification prior to shipment.
- Condition: New, refurbished, and tested-used options available — clearly labeled on each listing.
- Warranty: 90-day replacement warranty on all shipped units.
- Certification: Certificates of conformance available upon request.
How to Order
- Confirm your rack model and slot availability in your Series Six system.
- Verify the required output signal type (current or voltage) and channel count.
- Add the IC600-FP941K to your cart or contact us for bulk/project pricing.
- Provide your shipping address — we ship worldwide with DHL, FedEx, and UPS.
- Receive your order with full documentation and packing list.
📧 support@konmask.com | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Is the IC600-FP941K still in production?
A: GE Fanuc Series Six has been discontinued. Konmask.com supplies new-old-stock and refurbished units to support legacy systems.
Q: Can I use IC600-FP941K in a Series 90-30 rack?
A: No. The Series Six and Series 90-30 use different backplane architectures and are not physically or electrically compatible.
Q: What is the difference between IC600-FP941 and IC600-FP941K?
A: The “K” suffix typically denotes a hardware revision. Functionally equivalent in most applications, but verify with your system documentation.
Q: Do you offer a tested/refurbished option?
A: Yes. All refurbished units are bench-tested and include a 90-day warranty. Contact us for availability and pricing.
Q: Can Konmask.com help with a full Series Six to PACSystems migration?
A: We can recommend compatible migration hardware and connect you with engineering resources. Contact our technical team for details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


