HONEYWELL 51196742-200 Video Cable | Replacement, Equivalent & Selection Guide
The HONEYWELL 51196742-200 is an OEM video cable designed for use within Honeywell’s distributed control system (DCS) and process automation platforms. This cable provides reliable signal transmission between operator workstations, HMI displays, and control hardware in demanding industrial environments. Whether you are sourcing an original replacement or evaluating compatible equivalents, this guide covers everything you need to make the right selection.
Technical Specifications
- Part Number: 51196742-200
- Manufacturer: Honeywell Process Solutions
- Type: Video / Display Signal Cable
- Weight: 290 g
- Application: DCS Operator Station / HMI Display Interface
- Connector Type: OEM-specified (refer to system documentation for pin-out)
- Signal Type: Analog/Digital Video
- Operating Environment: Industrial control room / panel enclosure
- Compliance: Designed to Honeywell TotalPlant / Experion platform standards
Compatible Replacement & Equivalent Models
When the original 51196742-200 is unavailable or discontinued, the following replacement strategies apply. Always verify connector type, signal standard, and cable length before substitution:
- Honeywell 51196742-100 — Earlier revision; verify length and connector compatibility
- Honeywell 51196742-300 — Later revision; may offer extended length or updated shielding
- Generic VGA / DVI Industrial Cable — Only suitable if the target display accepts standard video input; confirm with system integrator
- Custom OEM Equivalent — Third-party manufacturers can produce pin-compatible cables to Honeywell specifications; request a datasheet before ordering
Note: Konmask.com supplies both original Honeywell parts and verified compatible equivalents. Contact us to confirm availability for your specific revision.
Why Choose the Original Model
- Guaranteed Compatibility: Engineered specifically for Honeywell DCS platforms — no integration risk
- Signal Integrity: OEM shielding and impedance matching ensure noise-free video transmission in high-EMI environments
- Warranty Compliance: Using original parts preserves your system warranty and Honeywell service agreements
- Traceability: Full manufacturing traceability for regulated industries (oil & gas, power, pharma)
- Longevity: Rated for extended service life under continuous industrial duty cycles
Typical Applications
- Honeywell TotalPlant Solution (TPS) operator workstation display connections
- Honeywell Experion PKS HMI station video output
- DCS control room monitor replacement and upgrade projects
- Spare parts inventory for process plants (refinery, chemical, power generation)
- System migration and modernization projects requiring legacy cable replacement
System Compatibility
- Honeywell TotalPlant Solution (TPS) — GUS / US Operator Stations
- Honeywell Experion PKS — C300, C200, ACE nodes with local display
- Honeywell PlantScape — Legacy operator console video interface
- Honeywell FSC / Safety Manager — Engineering workstation display (verify revision)
If your platform is not listed, please provide your system model and firmware version when contacting us — our engineers will confirm compatibility.
Selection Guide
Use the following criteria to select the correct video cable for your application:
- Step 1 — Identify your platform: Confirm the exact Honeywell DCS platform and operator station model number from the system nameplate or engineering drawings.
- Step 2 — Check cable revision: The suffix (-100, -200, -300) typically denotes cable length or connector revision. Match the suffix to your existing installation.
- Step 3 — Measure cable run: Confirm the required cable length. Do not substitute a shorter cable — signal degradation may occur with improvised extensions.
- Step 4 — Verify connector type: Inspect both ends of the existing cable before ordering. Photograph connectors and share with our team if uncertain.
- Step 5 — Confirm stock and lead time: Contact Konmask.com with your part number and required quantity. We will confirm availability and delivery timeline.
Quality Assurance & Sourcing
- All parts sourced through authorized distribution channels or verified surplus with full traceability documentation
- Each unit inspected for physical integrity, connector condition, and labeling accuracy prior to dispatch
- Anti-static packaging and moisture-barrier protection for long-term storage and international shipping
- Certificate of Conformance (CoC) available upon request for regulated procurement
- Counterfeit-prevention policy: we do not source from unverified grey-market channels
How to Order
- Online: Add to cart directly on this page — stock levels are updated in real time
- Email: Send your PO or RFQ to support@konmask.com with part number, quantity, and required delivery date
- Phone / WhatsApp: +0086 19859288691 — available for urgent requirements and bulk orders
- Lead Time: In-stock orders ship within 1–3 business days; out-of-stock items subject to sourcing lead time (typically 2–4 weeks)
- Payment: T/T bank transfer, PayPal, and major credit cards accepted
- Export: We ship worldwide with full export documentation (commercial invoice, packing list, CoC)
Replacement & Compatibility FAQ
Q: Can I use a standard VGA cable instead of the 51196742-200?
A: Only if your operator station’s video output uses a standard VGA signal and connector. Many Honeywell OEM cables use proprietary pin assignments — substituting a generic cable without verification risks display failure or hardware damage.
Q: Is the -200 suffix a length designation?
A: In Honeywell’s part numbering convention, the suffix typically indicates a specific configuration (length, connector type, or revision). Confirm with your system documentation or contact us with your station model for clarification.
Q: Do you supply new or refurbished units?
A: We supply both new OEM stock and inspected surplus units. Condition is clearly stated on each listing. Contact us if you require new-only supply for warranty or compliance reasons.
Q: Can you source other Honeywell DCS cables not listed on your site?
A: Yes. We maintain access to an extensive Honeywell parts network. Submit your part number via email and we will provide availability and pricing within 24 hours.
Q: What is your return policy for cables?
A: Unused, unopened cables in original packaging may be returned within 14 days. Custom-sourced or special-order items are non-returnable. See our full returns policy for details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
