FOUNDATION Fieldbus Integration Solution — Honeywell 51410087-175 CC-PFB801 | Experion PKS Series
Where This Product Is Used
The Honeywell CC-PFB801 (P/N 51410087-175) is a dedicated FOUNDATION Fieldbus (FF) Interface Module engineered for integration within Honeywell’s Experion PKS (Process Knowledge System) distributed control architecture. It is deployed across the following industrial environments:
- Oil & Gas Processing Plants — upstream wellhead control, midstream pipeline monitoring, and downstream refinery unit operations where FF H1 segment communication is mandatory.
- Chemical & Petrochemical Facilities — reactor loop control, distillation column instrumentation, and batch process automation requiring deterministic fieldbus communication.
- Power Generation — boiler management systems, turbine control auxiliaries, and balance-of-plant I/O integration over FF H1 segments.
- Pulp & Paper Mills — continuous process lines where FF-enabled transmitters and control valves communicate directly with the DCS via this module.
- Water & Wastewater Treatment — SCADA-integrated DCS nodes requiring FF device management and diagnostics.
- Pharmaceutical Manufacturing — GMP-compliant process control loops with FF-enabled field instruments requiring audit-trail-capable DCS integration.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 51410087-175 |
| Model | CC-PFB801 |
| Manufacturer | Honeywell Process Solutions |
| Series | Experion PKS / C300 Controller Series |
| Module Type | FOUNDATION Fieldbus (FF-H1) Interface Module |
| Fieldbus Standard | IEC 61158 / FOUNDATION Fieldbus H1 |
| FF H1 Segments Supported | Up to 8 per module (model-dependent) |
| Communication Protocol | FOUNDATION Fieldbus H1 (31.25 kbit/s) |
| Backplane Interface | Experion Series EUCN / SCNV backplane |
| Power Supply | Supplied via backplane (no external PSU required) |
| Operating Temperature | 0°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% RH, non-condensing |
| Mounting | Experion Series I/O chassis / carrier |
| Certifications | CE, UL, cUL, ATEX (zone 2 when installed per SIS guidelines) |
| Firmware Upgradeable | Yes, via Experion Engineering Tools |
Why Engineers Specify This Model
- Native Experion PKS Integration — The CC-PFB801 is a factory-designed module for the Experion C300 controller family, eliminating gateway latency and third-party compatibility risks inherent in non-native FF interfaces.
- Multi-Segment H1 Support — A single module manages multiple FF H1 segments, reducing chassis slot consumption and simplifying cabinet layout in brownfield expansions.
- Device Diagnostics & Asset Management — Integrates with Honeywell’s Field Device Manager (FDM) and AMS Device Manager for live FF device health monitoring, predictive maintenance alerts, and NAMUR NE 107 status propagation.
- Deterministic Communication — FF H1’s scheduled communication model ensures cycle-accurate data delivery for closed-loop control, critical in reactor and turbine applications.
- Hot-Swap Capable — Supports online replacement within the Experion chassis without process shutdown, maximizing plant availability.
- Redundancy Ready — Compatible with Experion redundant controller configurations for SIL-rated and high-availability control loops.
Complete System Bill of Materials
A typical Experion PKS FOUNDATION Fieldbus node using the CC-PFB801 requires the following components:
- Honeywell CC-PFB801 (51410087-175) — FF H1 Interface Module (this item)
- Honeywell C300 Process Controller (CC-PCF901 / CC-PCF902) — Host controller
- Experion Series I/O Chassis / Carrier — Module mounting
- Honeywell CC-PWR001 / CC-PWR002 — Chassis power supply
- FF H1 Segment Power Conditioner (e.g., MTL, Pepperl+Fuchs, or R. Stahl) — Per H1 segment
- FF H1 Terminator (passive, 100Ω + 1µF) — Two per H1 segment
- FF-enabled Field Instruments (transmitters, positioners, analyzers) — Per process loop
- Honeywell Experion PKS Server with FDM License — Engineering & asset management
- Shielded Twisted-Pair Fieldbus Cable (Type A, IEC 61158-2) — Per segment run
Compliance & Industry Standards
- IEC 61158 — FOUNDATION Fieldbus communication standard
- IEC 61511 / IEC 61508 — Functional safety (SIL) framework compatibility
- NAMUR NE 107 — Field device status signal classification
- CE Marking — EU electromagnetic compatibility and low-voltage directives
- UL / cUL Listed — North American safety certification
- ATEX Category 3G — Zone 2 hazardous area installation (per Honeywell installation guidelines)
- ISA-5.1 — Instrumentation symbols and identification compatibility
Quality Assurance & Sourcing
Konmask.com sources the Honeywell 51410087-175 CC-PFB801 through verified industrial automation supply channels. Every unit offered is subject to the following quality controls:
- Visual & Physical Inspection — Connector integrity, label authenticity, and housing condition verified prior to listing.
- Traceability Documentation — Original manufacturer labels, revision markings, and where available, factory test records are retained.
- Functional Verification — Modules are bench-tested for backplane communication and FF segment initialization where test infrastructure permits.
- Authentic Parts Only — Konmask does not list counterfeit, remarked, or unverified-origin components. All stock is traceable to authorized distribution or decommissioned OEM plant assets.
- Packaging — Shipped in anti-static ESD packaging with foam cushioning to prevent transit damage to sensitive PCB assemblies.
How to Source This Part
To request a quote or confirm current stock availability for the Honeywell 51410087-175 CC-PFB801:
- Online: Submit an inquiry directly via the product page at Konmask.com
- Email: support@konmask.com — include your required quantity, delivery timeline, and destination country.
- Phone / WhatsApp: +0086 19859288691 — available for urgent procurement and technical pre-sales questions.
- Lead Time: In-stock units typically ship within 2–5 business days. Ex-stock or sourced units: 7–21 business days depending on origin.
- Export Compliance: Buyers are responsible for confirming import licensing requirements in their jurisdiction. Konmask provides standard commercial invoices and packing lists for customs clearance.
Application-Specific FAQ
Q: Is the CC-PFB801 compatible with Experion R500 and later software releases?
A: Compatibility depends on the specific firmware revision of the module. Konmask recommends confirming the hardware revision (Rev. A/B/C) against Honeywell’s Experion compatibility matrix before ordering for R500+ environments. Contact us with your Experion server version for pre-sales guidance.
Q: Can this module be used in a redundant controller configuration?
A: Yes. The CC-PFB801 supports Experion redundant C300 controller pairs. The FF segments managed by the module will fail over to the secondary controller in the event of a primary controller fault, subject to Honeywell’s redundancy configuration requirements.
Q: How many FF field devices can be connected per H1 segment?
A: FOUNDATION Fieldbus H1 supports up to 32 devices per segment in theory; practical limits are typically 12–16 devices per segment due to power budget, cable length, and macrocycle timing constraints. Honeywell’s Segment Design Tool should be used for accurate segment sizing.
Q: Is this module suitable for SIL 2 safety loops?
A: The CC-PFB801 is not independently SIL-certified as a safety module. For SIL 2 applications, Honeywell’s Safety Manager or dedicated SIS I/O modules should be used. The CC-PFB801 is appropriate for basic process control (BPCS) loops adjacent to safety systems.
Q: Do you supply the FF H1 power conditioners and terminators as well?
A: Yes. Konmask stocks a range of FF H1 segment accessories including power conditioners and terminators from MTL, Pepperl+Fuchs, and R. Stahl. Contact us with your segment count and hazardous area classification for a matched BOM quote.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691




