Honeywell 900B16-0202 – RTD Temperature Sensor | HC900 Hybrid Control System
The Honeywell 900B16-0202 is a precision RTD (Resistance Temperature Detector) input module designed for the HC900 Hybrid Control Designer platform. Engineered for demanding process environments, this sensor interface module delivers high-accuracy temperature measurement with direct integration into Honeywell’s distributed control architecture. Procurement engineers sourcing reliable HC900 components will find the 900B16-0202 a proven, specification-compliant solution available through Konmask.com with full traceability.
Product Positioning: The 900B16-0202 serves as the primary RTD signal acquisition front-end in HC900 controller racks, supporting multi-channel temperature monitoring across refining, chemical, and power generation processes where measurement integrity is non-negotiable.
Complete Technical Specifications
| Part Number | 900B16-0202 |
| Manufacturer | Honeywell Process Solutions |
| Series / Platform | HC900 Hybrid Control Designer |
| Module Type | RTD Temperature Input Module |
| Input Channels | 16 channels |
| RTD Types Supported | PT100, PT200, PT500, PT1000 (IEC 60751); Ni120 |
| Measurement Range | -200°C to +850°C (PT100) |
| Accuracy | ±0.1°C typical |
| Resolution | 0.1°C |
| Excitation Current | 1 mA (3-wire / 4-wire RTD) |
| Wiring Configuration | 2-wire, 3-wire, 4-wire |
| Isolation | Channel-to-channel and channel-to-bus isolation |
| Power Consumption | ≤ 3.5 W |
| Operating Temperature | 0°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% RH, non-condensing |
| Backplane Interface | HC900 I/O rack backplane (900RK series) |
| Certifications | CE, UL, cUL |
| Weight | 550 g (approx.) |
| Country of Origin | USA |
Proven Application Environments
- Refinery & Petrochemical: Reactor temperature profiling, distillation column monitoring, heat exchanger control loops
- Power Generation: Turbine bearing temperature, boiler feed water, steam header monitoring
- Pharmaceutical: Bioreactor temperature control, clean-in-place (CIP) process validation
- Food & Beverage: Pasteurization, fermentation, and cold-chain temperature logging
- Pulp & Paper: Dryer section temperature profiling, digester control
- Water Treatment: Aeration basin and sludge temperature monitoring
Engineering Advantages
- 16-Channel Density: Maximizes rack utilization — fewer modules, lower wiring cost per point
- Multi-Wire RTD Support: 2/3/4-wire configurations eliminate lead resistance errors in long cable runs
- High Isolation: Channel-to-channel isolation prevents ground loops from corrupting adjacent measurements
- Seamless HC900 Integration: Plug-and-play with HC900 controller racks; auto-recognized by HC900 Designer software
- Wide RTD Compatibility: Supports PT100/200/500/1000 and Ni120 — no external signal conditioners required
- Diagnostic Reporting: Open-circuit and out-of-range detection reported directly to HC900 controller
System Architecture & Signal Flow
The 900B16-0202 mounts directly into an HC900 I/O rack (900RK series) and communicates with the HC900 controller via the rack backplane. Field RTD sensors connect to the module’s terminal block. The module applies a precision excitation current, measures the resulting voltage, performs linearization per IEC 60751, and delivers engineering-unit temperature values to the HC900 controller scan cycle. The HC900 Designer configuration software provides channel-level tag assignment, scaling, and alarm configuration without additional hardware.
Typical rack configuration: HC900 Controller (900C52 / 900C72) → 900RK I/O Rack → 900B16-0202 RTD Module → Field RTD Sensors
Sourcing & Quality Verification
- All units sourced from authorized Honeywell distribution channels or verified surplus with full documentation
- Pre-shipment functional test: channel continuity, excitation current verification, and backplane communication check
- Original Honeywell packaging and labeling preserved where available
- Serialization and date-code records maintained for traceability
- Export compliance verified — ECCN classification confirmed prior to international shipment
Procurement Process
- Submit your RFQ via konmask.com/pages/contact or email support@konmask.com
- Receive availability confirmation and lead time within 24 business hours
- Review quotation including unit price, shipping terms (EXW/DDP), and warranty
- Issue PO — accepted formats: PDF, email confirmation
- Shipment with tracking number and packing list provided
- Post-delivery technical support available via email or WhatsApp
Technical FAQ
Q: Is the 900B16-0202 compatible with all HC900 rack sizes?
A: Yes. It is compatible with all 900RK series racks (4-slot, 8-slot, 12-slot) running HC900 firmware R4.0 and above.
Q: Can I mix 900B16-0202 with thermocouple input modules in the same rack?
A: Yes. HC900 racks support mixed I/O module types. Each module is independently configured in HC900 Designer.
Q: What is the maximum cable length for RTD field wiring?
A: Honeywell recommends ≤ 300 m for 3-wire PT100 at 0.5 mm² cable. Use 4-wire configuration for longer runs to eliminate lead resistance error.
Q: Does the module support HART or fieldbus communication?
A: No. The 900B16-0202 is a backplane-bus module; field communication is via direct RTD wiring only.
Q: What warranty is provided?
A: Konmask.com provides a 12-month warranty against manufacturing defects on all verified units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


