Honeywell 900P01-0601 Power Supply Module | Replacement, Equivalent & Selection Guide
The Honeywell 900P01-0601 is a dedicated DC power supply module designed for use within Honeywell’s Experion PKS / C300 DCS control system architecture. It provides stable, regulated power to I/O modules and controller nodes, ensuring continuous and reliable operation in demanding industrial automation environments. At Konmask.com, we specialize in sourcing genuine and compatible automation components — helping engineers make confident selection and replacement decisions.
Technical Specifications
- Part Number: 900P01-0601
- Manufacturer: Honeywell Process Solutions
- Series: Experion PKS / C300 DCS
- Module Type: DC Power Supply Module
- Output Voltage: 24 VDC (nominal)
- Input Voltage: 85–264 VAC, 47–63 Hz (universal input)
- Output Power: Refer to Honeywell datasheet for rated wattage
- Redundancy Support: Yes — supports N+1 redundant power configuration
- Mounting: DIN rail / backplane integrated
- Weight: Approx. 4.46 kg (with packaging)
- Operating Temperature: 0°C to 60°C
- Protection: Over-voltage, over-current, short-circuit protection
- Certifications: CE, UL (verify with current Honeywell documentation)
Compatible Replacement & Equivalent Models
When the 900P01-0601 is unavailable or end-of-life, the following models may serve as functional equivalents or drop-in replacements depending on your system revision. Always verify compatibility with your system integrator before substitution.
- Honeywell 900P01-0101 — Earlier revision power supply; verify firmware and backplane compatibility
- Honeywell 900P01-0201 — Mid-series revision; same form factor, check output rating
- Honeywell 900P01-0401 — Functionally similar; confirm connector pinout
- Honeywell CC-PWRR01 — C300 redundant power supply; used in newer Experion R500+ systems
- Honeywell CC-PWR001 — Standard C300 power supply for non-redundant configurations
- Third-party 24VDC DIN rail PSU — Only for non-critical auxiliary circuits; not recommended for controller backplane power
Note: Konmask.com recommends using OEM parts for safety-critical DCS applications. Contact us for cross-reference verification.
Why Choose the Original 900P01-0601
- ✅ Guaranteed compatibility with Honeywell Experion PKS C300 backplane
- ✅ Validated firmware integration — no configuration changes required
- ✅ Redundancy-ready — supports hot-swap in N+1 configurations without process interruption
- ✅ Long-term support from Honeywell Process Solutions
- ✅ Traceable quality — factory-tested with full documentation
Typical Applications
- Oil & gas refinery DCS control panels
- Chemical plant process automation systems
- Power generation and utilities control rooms
- Pharmaceutical batch control systems
- Pulp & paper and mining automation infrastructure
System Compatibility
- Honeywell Experion PKS — R400, R410, R430, R500 series
- C300 Controller — all standard and redundant configurations
- CIOM-A / CIOM-B I/O Modules — via C300 backplane power rail
- FIM (Field Interface Module) — compatible when used within rated load
Always consult the Honeywell Experion PKS Hardware Planning Guide for your specific revision before installation.
Selection Guide
Use the table below to determine the correct power supply for your C300 system configuration:
- Single controller, non-redundant power: → CC-PWR001
- Single controller, redundant power: → CC-PWRR01 (pair)
- Legacy C300 backplane (pre-R400): → 900P01-0601 ✅ (this model)
- High-density I/O chassis: → Verify chassis power budget; may require dual PSU
- Hazardous area (Zone 1/2): → Requires IS-rated external PSU; consult Honeywell
Quality Assurance & Sourcing
All Honeywell modules sourced through Konmask.com undergo the following process:
- 🔍 Visual and functional inspection upon receipt
- 📦 Original or equivalent protective packaging
- 📄 Traceability documentation available on request
- 🔄 30-day return policy for unused, unopened items
- 🌐 Global shipping with DHL / FedEx / UPS express options
How to Order
- Confirm your system revision (Experion PKS R-series) and backplane model
- Verify required output voltage and redundancy configuration
- Add Honeywell 900P01-0601 to cart or contact us for bulk/project pricing
- Provide your PO number or project reference for B2B invoicing
- Receive order confirmation and estimated lead time within 24 hours
📧 support@konmask.com | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Can I replace 900P01-0601 with CC-PWRR01?
A: Only if your system has been upgraded to Experion R500 or later. The CC-PWRR01 uses a different backplane connector. Verify with Honeywell engineering before substitution.
Q: Is the 900P01-0601 still in production?
A: This model may be in limited availability or end-of-life status. Konmask.com maintains stock of both new and refurbished units. Contact us for current availability.
Q: Can I use a generic 24VDC PSU as a replacement?
A: Not recommended for controller backplane power. Generic PSUs lack the transient response and protection features required by Honeywell DCS specifications.
Q: What is the lead time for 900P01-0601?
A: In-stock orders ship within 1–3 business days. Out-of-stock items typically have a 2–6 week lead time depending on sourcing channel.
Q: Do you provide a warranty?
A: Yes — 90-day warranty on all functional modules. Extended warranty available for project orders.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
