PROFIBUS DP Network Coupling Solution – Siemens 6ES7158-0AD00-0XA0 | SIMATIC S7 DP/DP Coupler
Where This Product Is Used
The Siemens 6ES7158-0AD00-0XA0 DP/DP Coupler Module is engineered for industrial environments where two independent PROFIBUS DP networks must exchange data without sharing a common master. Typical deployment scenarios include:
- Automotive Assembly Lines – Bridging robot controller networks with conveyor PLC segments while maintaining electrical isolation between safety and production zones.
- Chemical & Process Plants – Coupling DCS field-bus segments to SCADA-connected PROFIBUS rings, enabling cross-system I/O mapping without gateway latency.
- Power Generation & Utilities – Interconnecting turbine control networks with plant-wide SIMATIC S7 systems for synchronized monitoring.
- Packaging & Material Handling – Linking high-speed servo drive networks to upstream PLC masters for coordinated motion sequencing.
- Building Automation & Infrastructure – Integrating legacy PROFIBUS DP segments into modernized S7-300/400 control architectures.
Technical Specifications
| Part Number (SKU) | 6ES7158-0AD00-0XA0 |
| Brand | Siemens |
| Series | SIMATIC S7 / ET 200 |
| Module Type | DP/DP Coupler (PROFIBUS DP to PROFIBUS DP) |
| Interface | 2 × PROFIBUS DP (RS-485), 9-pin Sub-D female |
| Max. Data Exchange | 244 bytes input / 244 bytes output per direction |
| Baud Rate | 9.6 kbps – 12 Mbps (auto-detect per segment) |
| Electrical Isolation | Yes – galvanic isolation between DP segments |
| Power Supply | 24 V DC (via bus connector or external) |
| Operating Temperature | 0 °C to +60 °C |
| Storage Temperature | -40 °C to +70 °C |
| Degree of Protection | IP20 |
| Dimensions (W×H×D) | 40 × 125 × 120 mm |
| Weight | Approx. 280 g |
| Mounting | DIN rail (35 mm) |
| Certifications | CE, UL, cULus, ATEX (Zone 2) |
Why Engineers Specify This Model
- True Galvanic Isolation – Prevents ground loops and protects sensitive instrumentation from electrical noise propagating across network boundaries.
- Plug-and-Play Configuration – No GSD file or software parameterization required; address switches set directly on the module housing.
- Bidirectional Transparent Data Exchange – Both DP segments operate as independent masters; the coupler acts as a slave on each side, enabling symmetric I/O mapping.
- Wide Baud Rate Compatibility – Each port auto-negotiates independently, allowing mixed-speed networks (e.g., 1.5 Mbps legacy + 12 Mbps modern) to coexist.
- Compact DIN-Rail Form Factor – Fits standard control cabinet layouts without requiring additional mounting hardware or panel cutouts.
- Proven Siemens SIMATIC Ecosystem – Fully compatible with S7-300, S7-400, S7-1500 (via CM), and ET 200 distributed I/O families.
Complete System Bill of Materials
For a complete DP/DP coupling solution, engineers typically specify the following alongside the 6ES7158-0AD00-0XA0:
- PROFIBUS DP cable (e.g., Siemens 6XV1830-0EH10) – shielded, twisted-pair, per IEC 61158
- PROFIBUS bus connector with 90° termination (e.g., 6ES7972-0BB52-0XA0)
- 24 V DC power supply (e.g., Siemens SITOP PSU100S 6EP1334-2BA20)
- DIN rail (TS 35, steel or aluminum, per EN 60715)
- PROFIBUS terminating resistor plug (if end-of-line node)
- S7-300/400 CPU or ET 200M IM (master on each DP segment)
Compliance & Industry Standards
- IEC 61158 / EN 50170 – PROFIBUS DP communication standard
- IEC 61131-2 – Programmable controllers: equipment requirements and tests
- EN 61000-6-2 / EN 61000-6-4 – EMC immunity and emission for industrial environments
- UL 508 / cULus – Industrial control equipment (North American market)
- ATEX Directive 2014/34/EU – Zone 2 hazardous area suitability
- RoHS 2011/65/EU – Restriction of hazardous substances compliance
Quality Assurance & Sourcing
Konmask.com sources the Siemens 6ES7158-0AD00-0XA0 exclusively through verified industrial distribution channels. Every unit undergoes the following before dispatch:
- Visual inspection of housing, connectors, and label integrity
- Firmware version verification against Siemens product lifecycle records
- Functional power-on test with PROFIBUS loopback verification
- Anti-static packaging with humidity indicator card
- Traceability documentation available upon request (batch/lot records)
How to Source This Part
To place an order or request a quotation for the Siemens 6ES7158-0AD00-0XA0:
- Online: Add to cart directly on this page – stock availability shown in real time.
- Email RFQ: support@konmask.com – include quantity, required delivery date, and project reference.
- Phone / WhatsApp: +0086 19859288691 – available Monday–Saturday, 09:00–18:00 CST.
- Bulk / OEM Orders: Volume pricing available for orders of 5+ units; contact us for a formal quotation.
Application-Specific FAQ
Q: Can the 6ES7158-0AD00-0XA0 connect a PROFIBUS DP network to a PROFIBUS PA network?
A: No. This module couples two PROFIBUS DP segments only. For DP-to-PA coupling, specify the Siemens DP/PA Link (6ES7157-0AC83-0XA0) or DP/PA Coupler (6ES7157-0AD00-0XA0).
Q: Is GSD file configuration required in STEP 7 or TIA Portal?
A: The coupler itself requires no GSD parameterization — address selection is hardware-based. However, each DP master must configure the coupler as a standard DP slave in its hardware configuration using the provided GSD file (available from Siemens Industry Online Support).
Q: What is the maximum number of I/O bytes exchangeable between the two DP segments?
A: Up to 244 bytes of input data and 244 bytes of output data can be exchanged in each direction per DP cycle.
Q: Can both PROFIBUS segments run at different baud rates?
A: Yes. Each port independently auto-detects the baud rate of its connected segment, allowing mixed-speed topologies.
Q: Is this module compatible with S7-1500 systems?
A: The S7-1500 does not have a native PROFIBUS DP interface. Use a PROFIBUS CM (e.g., CM DP 6GK7542-6VX00-0XE0) on the S7-1500 rack to provide the DP master port, then connect to the coupler.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


