Yaskawa JZRCR-NTU01D-1 NX100 Robot Controller Power Supply | Replacement, Equivalent & Selection Guide
The Yaskawa JZRCR-NTU01D-1 is the dedicated power supply unit (PSU) for the Yaskawa NX100 robot controller series, widely used in Motoman industrial robot systems. This page provides full technical specifications, compatible replacement options, selection guidance, and sourcing information to help engineers and procurement teams make confident decisions.
Technical Specifications
- Part Number: JZRCR-NTU01D-1
- Compatible Controller: Yaskawa NX100
- Function: Internal Power Supply Unit for NX100 Robot Controller
- Manufacturer: Yaskawa Electric Corporation (Motoman)
- Series: NX100 Controller Components
- Weight: Approx. 560 g
- Condition Available: New, Refurbished, Exchange
- Country of Origin: Japan
Compatible Replacement & Equivalent Models
When the original JZRCR-NTU01D-1 is unavailable or discontinued, the following models may serve as functional equivalents or replacements depending on your controller revision and robot model. Always verify compatibility with your system documentation before substitution.
- JZRCR-NTU01B-1 — Earlier revision; verify connector and firmware compatibility
- JZRCR-NTU01C-1 — Intermediate revision; functionally similar in most NX100 configurations
- JZNC-NTU01-1 — Check applicability for specific NX100 sub-variants
- Third-party compatible PSU modules — Available from certified industrial automation suppliers; must match voltage rails and connector pinout
Note: Konmask.com recommends using OEM parts wherever possible to ensure system stability and warranty compliance.
Why Choose the Original JZRCR-NTU01D-1
- ✅ Guaranteed compatibility with Yaskawa NX100 controller hardware
- ✅ Meets Yaskawa factory specifications for voltage regulation and ripple tolerance
- ✅ Supports full NX100 I/O and servo drive power distribution
- ✅ Reduces risk of controller faults caused by under-spec power delivery
- ✅ Backed by Yaskawa’s global service and parts network
Typical Applications
- Motoman UP series robot systems (UP6, UP20, UP50, etc.) paired with NX100 controllers
- Automotive body welding and assembly lines
- Material handling and palletizing automation
- Arc welding and spot welding robot cells
- General-purpose industrial robot installations requiring NX100 controller power restoration
System Compatibility
The JZRCR-NTU01D-1 is designed exclusively for the Yaskawa NX100 controller platform. It is not directly interchangeable with power supplies from the XRC, DX100, DX200, or YRC1000 controller families without engineering verification. Confirm your controller model and revision code before ordering.
- ✔ Compatible: Yaskawa NX100 (all standard variants)
- ✘ Not compatible: XRC, MRC, ERC, DX100, DX200, YRC1000 (without engineering review)
Selection Guide
Use the following checklist to confirm the correct power supply for your NX100 system:
- Step 1: Confirm controller model — check the nameplate on your NX100 cabinet door
- Step 2: Note the existing PSU part number printed on the unit label
- Step 3: Match the revision suffix (-1, -2, etc.) to ensure connector and firmware alignment
- Step 4: If replacing a failed unit, check for secondary damage to the power distribution board
- Step 5: Contact Konmask.com with your controller serial number for expert verification
Quality Assurance & Sourcing
All units sourced through Konmask.com undergo the following quality process:
- Visual and functional inspection prior to shipment
- Traceability documentation available on request
- Secure anti-static packaging for safe international shipping
- New OEM stock and certified refurbished options available
- Export compliance reviewed for cross-border orders
How to Order
- Add the JZRCR-NTU01D-1 to your cart directly from this page
- For bulk orders or special pricing, email support@konmask.com
- Provide your controller serial number for compatibility confirmation if needed
- International orders accepted — contact us for shipping rates and lead times
- Phone: +0086 19859288691
Replacement & Compatibility FAQ
Q: Can I use a JZRCR-NTU01C-1 instead of the JZRCR-NTU01D-1?
A: In many NX100 configurations, the C-revision is functionally compatible, but connector pinouts and firmware behavior should be verified against your specific robot model documentation.
Q: Is the JZRCR-NTU01D-1 compatible with DX100 controllers?
A: No. The DX100 uses a different power supply architecture. Do not substitute without engineering approval.
Q: Do you offer exchange/repair services for failed units?
A: Yes. Contact us at support@konmask.com to discuss exchange or repair options for your JZRCR-NTU01D-1.
Q: What is the lead time for new OEM stock?
A: Lead times vary by stock availability. Contact us for current inventory status and estimated delivery.
Q: Can I get a datasheet or wiring diagram?
A: Technical documentation requests can be submitted via email. We will provide available resources based on your application.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
