Yokogawa SPW482-53 S1 Power Supply Module | Replacement, Equivalent & Selection Guide
The Yokogawa SPW482-53 S1 is a redundant-capable DC power supply module designed for use in Yokogawa CENTUM VP and CS 3000 distributed control systems (DCS). It delivers stable, regulated power to field control stations (FCS) and I/O modules, ensuring continuous and reliable process automation. This page provides full technical specifications, compatible replacement options, and a structured selection guide to help engineers and procurement teams make informed sourcing decisions.
Technical Specifications
- Model: SPW482-53 S1
- Manufacturer: Yokogawa Electric Corporation
- Series: CENTUM VP / CS 3000 Power Supply Series
- Module Type: DC Power Supply Module
- Input Voltage: 100–240 V AC, 50/60 Hz (universal input)
- Output Voltage: 24 V DC (regulated)
- Redundancy: Supports N+1 redundant power configuration
- Weight: Approx. 880 g
- Mounting: DIN rail / FCS cabinet slot
- Operating Temperature: 0–55 °C
- Certifications: CE, UL (refer to Yokogawa datasheet for full compliance list)
- Part Number: SPW482-53 S1
Compatible Replacement & Equivalent Models
When the original SPW482-53 S1 is unavailable or end-of-life, the following models may serve as functional equivalents or drop-in replacements depending on your system configuration. Always verify electrical and mechanical compatibility before substitution.
- Yokogawa SPW482-53 S2 — Revised suffix variant; verify firmware and connector compatibility
- Yokogawa SPW481-53 — Single-output variant; suitable for non-redundant configurations
- Yokogawa PW481-50 — Earlier generation power module; check cabinet slot compatibility
- Third-party 24 V DC DIN-rail PSU — Must match output current rating, connector pinout, and redundancy signaling; consult Konmask engineering support before substitution
Note: Konmask.com recommends using genuine Yokogawa OEM parts wherever possible to maintain system warranty and SIL compliance.
Why Choose the Original SPW482-53 S1
- ✅ Guaranteed compatibility with CENTUM VP and CS 3000 FCS cabinets
- ✅ Redundancy support — hot-swap capable without process interruption
- ✅ Factory-tested to Yokogawa quality standards
- ✅ Long service life with predictable MTBF data available from Yokogawa
- ✅ Full traceability — serial number, batch, and factory test records available on request
Typical Applications
- Oil & gas refinery DCS power distribution
- Chemical plant field control station (FCS) power supply
- Power generation plant automation systems
- Pharmaceutical batch control systems using CENTUM VP
- Water treatment and utilities process control
System Compatibility
- Yokogawa CENTUM VP (R4.xx, R5.xx, R6.xx)
- Yokogawa CS 3000 (R3.xx)
- FCS Cabinet Types: AFC30D, AFC30S, and compatible variants
- I/O Modules: Compatible with all standard CENTUM VP I/O cards powered via FCS bus
If you are unsure whether SPW482-53 S1 is compatible with your specific cabinet revision, contact support@konmask.com with your FCS model and software version.
Selection Guide
Use the following criteria to confirm SPW482-53 S1 is the correct module for your application:
- Step 1 — Identify your FCS model: Confirm you have an AFC30D or compatible FCS cabinet
- Step 2 — Check redundancy requirement: SPW482-53 S1 supports redundant pair; if single supply is sufficient, consider SPW481-53
- Step 3 — Verify input voltage: Confirm site supply is 100–240 V AC
- Step 4 — Check suffix revision: S1 vs S2 — confirm with your Yokogawa system documentation or contact Konmask
- Step 5 — Confirm quantity: Redundant systems require 2× SPW482-53 S1 per FCS cabinet
Quality Assurance & Sourcing
- All units sourced through authorized or verified industrial supply channels
- Pre-shipment inspection available upon request
- Factory test reports and certificates of conformance provided where available
- Genuine OEM parts — no counterfeit or refurbished units without explicit disclosure
- Warranty: 12 months from date of shipment (subject to Konmask standard terms)
How to Order
- Add Yokogawa SPW482-53 S1 to your cart on this page
- For bulk orders (>2 units) or urgent requirements, email support@konmask.com
- Include your FCS model, CENTUM VP version, and required delivery date for fastest response
- Payment: T/T, PayPal, and major credit cards accepted
- Shipping: DHL / FedEx express worldwide; lead time 1–5 business days for in-stock units
Replacement & Compatibility FAQ
Q: Can SPW482-53 S2 replace SPW482-53 S1 directly?
A: In most cases yes, but verify connector pinout and firmware revision compatibility with your Yokogawa system engineer before swapping.
Q: Is SPW482-53 S1 compatible with CENTUM VP R6?
A: Yes, SPW482-53 S1 is compatible with CENTUM VP R4 through R6. Confirm with your site’s Yokogawa documentation.
Q: Can I use a generic 24 V DC PSU as a replacement?
A: Not recommended without engineering review. The SPW482-53 S1 includes redundancy signaling and specific connector interfaces that generic PSUs do not replicate.
Q: Do you provide a certificate of conformance?
A: Yes, available upon request for all orders. Contact support@konmask.com.
Q: What is the lead time for SPW482-53 S1?
A: Typically 1–5 business days for in-stock units. Contact us for current availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
