Yokogawa VI451-11 S3 Communication Module | Replacement, Equivalent & Selection Guide
The Yokogawa VI451-11 S3 is a serial communication interface module designed for use within Yokogawa’s CENTUM VP and CS 3000 distributed control systems (DCS). It provides reliable RS-232C / RS-422 / RS-485 serial data exchange between field devices and the control network, making it a critical component in process automation environments across oil & gas, petrochemical, power generation, and manufacturing industries.
At Konmask.com, we specialize in sourcing genuine, tested, and certified automation components — including hard-to-find DCS modules like the VI451-11 S3. Whether you need an original replacement or a verified equivalent, our team provides expert selection support.
Technical Specifications
- Manufacturer: Yokogawa Electric Corporation
- Model / SKU: VI451-11 S3
- Series: CENTUM VP / CS 3000 I/O Modules
- Module Type: Serial Communication Interface Card
- Communication Standards: RS-232C, RS-422, RS-485
- Protocol Support: Modbus RTU, proprietary Yokogawa serial protocols
- Mounting: DIN-rail / backplane slot (CENTUM VP field control station)
- Power Supply: Supplied via backplane bus
- Operating Temperature: 0°C to 55°C
- Weight: Approx. 560 g
- Certifications: CE, UL (refer to Yokogawa datasheet for full compliance list)
- Country of Origin: Japan
Compatible Replacement & Equivalent Models
When the VI451-11 S3 is discontinued, out of stock, or cost-prohibitive, the following models may serve as functional equivalents depending on your system configuration. Always verify firmware compatibility and slot assignment before substitution.
- Yokogawa VI451-10 S3 — Earlier hardware revision; functionally similar, verify firmware version
- Yokogawa VI461-11 S3 — Enhanced variant with additional port options; backward-compatible in most CENTUM VP stations
- Yokogawa AMC80 — Advanced multi-protocol communication card; suitable for upgraded system architectures
- Yokogawa ALR111 — RS-485 serial link module; applicable in specific CS 3000 configurations
- Third-party Modbus RTU gateways — May be used as protocol converters in non-critical loops; requires engineering validation
Note: Konmask.com recommends consulting your system integrator or Yokogawa-certified engineer before substituting any DCS communication module.
Why Choose the Original VI451-11 S3
- Guaranteed compatibility with CENTUM VP and CS 3000 field control stations without firmware modification
- Factory-validated communication timing and interrupt handling for deterministic process control
- Seamless integration with Yokogawa’s FAST/TOOLS SCADA and Exaopc OPC server
- Long-term support from Yokogawa’s global service network
- Reduced commissioning risk — no re-engineering of I/O mapping or tag databases required
Typical Applications
- Oil & gas upstream / midstream / downstream process control
- Petrochemical and refinery DCS integration
- Power plant boiler and turbine control systems
- Pharmaceutical batch process automation
- Pulp & paper and water treatment plant SCADA integration
- Serial device integration: flow computers, analyzers, smart transmitters
System Compatibility
- Yokogawa CENTUM VP (R4.xx, R5.xx, R6.xx) — Primary platform
- Yokogawa CS 3000 (R3.xx) — Legacy support
- Yokogawa CENTUM CS — With appropriate adapter; verify with Yokogawa engineering
- Third-party DCS / SCADA via Modbus RTU — Engineering assessment required
Selection Guide
Use the following criteria to determine whether the VI451-11 S3 is the right module for your application:
- Step 1 — Identify your DCS platform: Confirm you are running CENTUM VP or CS 3000. Check the field control station (FCS) model number on the cabinet label.
- Step 2 — Verify slot availability: The VI451-11 S3 occupies one I/O slot in the FCS nest. Confirm an open slot exists or identify a module to decommission.
- Step 3 — Check communication requirements: Confirm the target device uses RS-232C, RS-422, or RS-485 at a supported baud rate (typically 1200–115200 bps).
- Step 4 — Protocol validation: Ensure the field device protocol (Modbus RTU, proprietary) is supported by the VI451-11 S3 firmware version installed on your FCS.
- Step 5 — Quantity and redundancy: For critical loops, consider ordering a spare unit. Konmask.com can supply single units or small-batch orders.
Not sure which module fits your system? Contact our technical team at support@konmask.com with your FCS model and firmware version for a free selection consultation.
Quality Assurance & Sourcing
- All VI451-11 S3 units sourced by Konmask.com undergo visual inspection, functional power-on testing, and communication port verification prior to shipment.
- Units are supplied as genuine Yokogawa OEM parts — no counterfeit or remanufactured substitutes.
- Traceability documentation (lot number, test records) available upon request for regulated industries.
- Packaging: anti-static ESD bag + foam-lined carton, suitable for international air and sea freight.
- Warranty: 90-day functional warranty against manufacturing defects (see full terms at Konmask.com).
How to Order
- Online: Add to cart directly on this page. We accept T/T bank transfer, PayPal, and major credit cards.
- Email RFQ: Send your purchase order or RFQ to support@konmask.com — response within 1 business day.
- Phone / WhatsApp: +0086 19859288691 (Mon–Fri, 09:00–18:00 CST)
- Lead time: In-stock units ship within 2–3 business days. Ex-stock or sourced units: 7–21 business days depending on availability.
- Shipping: DHL Express, FedEx International Priority, or sea freight for bulk orders. Export documentation (commercial invoice, packing list, COO) included.
Replacement & Compatibility FAQ
Q: Can I use the VI451-11 S3 in a CENTUM VP R6 system?
A: Yes. The VI451-11 S3 is compatible with CENTUM VP R4 through R6. Confirm the FCS firmware supports the module revision (S3 suffix).
Q: Is the VI451-11 S3 a hot-swap module?
A: Hot-swap capability depends on the FCS configuration and whether the slot is defined as redundant. Consult your CENTUM VP engineering manual (IM 33S01B30-01E) before attempting live replacement.
Q: What is the difference between VI451-11 S3 and VI451-10 S3?
A: The S3 hardware revision includes updated ASIC components for improved EMC performance and extended temperature tolerance. The S3 is the current production revision and is backward-compatible with S2/S1 firmware in most configurations.
Q: Can Konmask.com supply a Certificate of Conformance (CoC)?
A: Yes. CoC and inspection reports are available upon request. Please specify your requirement at the time of order.
Q: Do you offer volume discounts for multiple units?
A: Yes. Contact us via email or WhatsApp for a volume pricing quote on orders of 3 or more units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
