Applied Materials 0020-02348 CLAMP | 544051 / DGSL-25-80-Y3A Replacement, Equivalent & Selection Guide
The Applied Materials 0020-02348 is an OEM clamp component used in semiconductor wafer processing equipment. This part is cross-referenced under multiple internal and supplier part numbers including 544051, DGSL-25-80-Y3A, 023SPX0180-XX-23N08, and 2232-MBG3957. Konmask.com supplies both genuine OEM and verified compatible replacement units to minimize downtime in critical fab environments.
Technical Specifications
- OEM Part Number: 0020-02348
- Cross-Reference / Alternate SKUs: 544051 | DGSL-25-80-Y3A | 023SPX0180-XX-23N08 | 2232-MBG3957
- Component Type: Clamp / Mechanical Fastening Component
- Manufacturer: Applied Materials (AMAT)
- Weight: 800 g (approx.)
- Condition Available: New OEM / Refurbished / Compatible Replacement
- Application: Semiconductor CVD / Etch / Deposition Equipment
Compatible Replacement & Equivalent Models
The following part numbers are confirmed cross-references or functional equivalents for the Applied Materials 0020-02348 CLAMP:
- 544051 — AMAT internal reference number
- DGSL-25-80-Y3A — Supplier/OEM alternate designation
- 023SPX0180-XX-23N08 — Extended cross-reference code
- 2232-MBG3957 — MBG/service cross-reference
Always verify dimensional and torque specifications before substituting with a compatible replacement. Contact [email protected] for compatibility confirmation.
Why Choose the Original Model
- Manufactured to AMAT OEM tolerances for precise fit in semiconductor process chambers
- Ensures process repeatability and wafer yield consistency
- Reduces risk of unplanned downtime caused by dimensional mismatch
- Backed by AMAT quality control and traceability documentation
- Preferred by fabs operating under strict process qualification (PQ) requirements
Typical Applications
- CVD (Chemical Vapor Deposition) process chambers
- Etch system mechanical assemblies
- Wafer handling and clamping fixtures
- PVD (Physical Vapor Deposition) equipment
- Semiconductor fab maintenance and spare parts inventory
System Compatibility
The 0020-02348 CLAMP is designed for use in Applied Materials process equipment platforms. Typical compatible systems include:
- Applied Materials Centura® platform modules
- Applied Materials Producer® CVD systems
- Applied Materials Endura® PVD systems
- Other AMAT chamber assemblies requiring equivalent clamp geometry
Note: Always cross-check the equipment BOM (Bill of Materials) or contact your process engineer before installation.
Selection Guide
Use the table below to determine the correct part for your application:
| Requirement | Recommended Option |
|---|---|
| OEM process qualification required | Genuine Applied Materials 0020-02348 |
| Cost-optimized maintenance spare | Verified compatible replacement (DGSL-25-80-Y3A equivalent) |
| Emergency replacement / short lead time | Refurbished OEM — contact Konmask for availability |
| Cross-reference confirmation needed | Submit RFQ with your equipment model and BOM reference |
Quality Assurance & Sourcing
- All parts sourced from authorized distributors or verified surplus channels
- Inspection and functional verification available upon request
- Traceability documentation (CoC, test reports) provided where available
- Packaging: anti-static, moisture-protected, labeled with part number and lot
- Export compliance: parts shipped in accordance with applicable trade regulations
How to Order
- Add the item to your cart and proceed to checkout, or
- Submit an RFQ via email: [email protected]
- Include your equipment model, required quantity, and delivery timeline
- Our team will confirm availability, lead time, and pricing within 1 business day
Phone / WhatsApp: +0086 19859288691
Website: https://konmask.com
Replacement & Compatibility FAQ
Q: Is DGSL-25-80-Y3A a direct replacement for Applied Materials 0020-02348?
A: DGSL-25-80-Y3A is a cross-referenced alternate part number. Dimensional and material compatibility should be verified against your equipment BOM before installation.
Q: Can I use 544051 interchangeably with 0020-02348?
A: 544051 is an AMAT internal reference for the same component family. Confirm with your equipment documentation or contact us for verification.
Q: Do you offer refurbished units?
A: Yes. Refurbished units are available subject to stock. Please submit an RFQ for current availability and pricing.
Q: What is the lead time for new OEM stock?
A: Lead times vary by stock level. In-stock items typically ship within 2–5 business days. Contact us for urgent requirements.
Q: Do you provide a certificate of conformance?
A: Yes, CoC documentation is available for OEM and select compatible parts upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
