Bently Nevada 330103-00-25-05-02-CN Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330103-00-25-05-02-CN is a high-precision eddy-current proximity transducer system from the industry-leading 3300 XL Series. Designed for continuous, non-contact measurement of shaft vibration, position, and eccentricity in rotating machinery, this system is widely deployed in turbines, compressors, pumps, and critical industrial equipment worldwide. Konmask.com supplies genuine and compatible units with full traceability for MRO and OEM procurement.
Technical Specifications
- Part Number: 330103-00-25-05-02-CN
- Brand / Manufacturer: Bently Nevada (Baker Hughes)
- Series: 3300 XL Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Cable Length: 5 m (extension cable)
- Probe Tip Diameter: 25 mm (8 mm standard probe)
- Measurement Range: 0–2.54 mm (0–100 mil)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: −35°C to +177°C (probe); −35°C to +85°C (driver)
- Supply Voltage: −24 VDC (nominal)
- Output: −1 VDC to −21 VDC (linear range)
- Connector: CN-type (China market standard connector)
- Approvals: CE, ATEX (consult datasheet for zone ratings)
- Weight: ~40 g (probe assembly)
Compatible Replacement & Equivalent Models
The table below lists direct replacements and functional equivalents for the 330103-00-25-05-02-CN. Always verify connector type, cable length, and scale factor before substitution.
| Model | Brand | Notes |
|---|---|---|
| 330103-00-25-05-02-00 | Bently Nevada | Same spec, standard international connector |
| 330103-00-25-10-02-CN | Bently Nevada | 10 m cable variant |
| 330103-00-25-05-02-05 | Bently Nevada | Armored cable variant |
| 3300 XL 8 mm Proximity System | Bently Nevada | Full system family reference |
| PR6423/010-030 | Epro (Baker Hughes) | Functional equivalent, eddy-current, 8 mm |
| CON021/916-120 | Epro | Compatible driver/conditioner |
| TQ402-A05-B00-C05-D00 | Shinkawa | Cross-brand equivalent, verify scale factor |
| VB-Z9500 | Metrix | Alternative proximity system, confirm gap range |
⚠ Disclaimer: Cross-brand equivalents require engineering validation. Contact Konmask.com for application-specific selection support.
Why Choose the Original Model
- Factory-calibrated scale factor (7.87 V/mm) ensures direct compatibility with Bently Nevada 3500 and System 1 monitoring platforms without recalibration.
- Proven MTBF in high-temperature, high-vibration environments (petrochemical, power generation, LNG).
- OEM traceability: each unit ships with a certificate of conformance and calibration record.
- CN connector variant eliminates field re-termination for China-market installations.
- Seamless integration with Bently Nevada 3300 XL drivers (330180, 330185) and 3500 rack monitors.
Typical Applications
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal compressor rotor position and vibration measurement
- Pump and motor bearing proximity sensing
- Eccentricity and differential expansion measurement
- Critical machinery protection systems (API 670 compliant installations)
- Petrochemical, LNG, power generation, and refinery plant assets
System Compatibility
- Drivers / Oscillator-Demodulators: Bently Nevada 330180-51-00, 330185-02-05, 3300 XL 11 mm driver
- Monitoring Racks: Bently Nevada 3500 Series (3500/40M, 3500/42M, 3500/45), 3300 Series
- Software Platforms: System 1 Evolution, Orbit 60 Series
- DCS Integration: 4–20 mA output via 3500/04 I/O module; Modbus/PROFIBUS via gateway
- Target Material: AISI 4140 steel (standard); consult Bently Nevada for non-standard alloys
Selection Guide
Use the following parameters to confirm the correct 330103 variant for your application:
- Cable Length: -05 = 5 m | -10 = 10 m | -15 = 15 m (probe + extension combined)
- Probe Tip Size: -25 = 25 mm diameter (standard 8 mm eddy-current probe)
- Armoring: -02 = standard PVC jacket | -05 = stainless armored
- Connector: -CN = China market CN-type | -00 = standard international
- Temperature Class: Verify probe body rating vs. bearing housing temperature
- Gap Range: Confirm 0–2.54 mm linear range suits your shaft-to-probe clearance
Not sure which variant fits your system? Contact our selection team with your existing part number, driver model, and rack type.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels with full chain-of-custody documentation.
- Pre-shipment inspection: visual, dimensional, and electrical output verification against Bently Nevada factory specifications.
- Certificate of Conformance (CoC) and calibration record included with every shipment.
- ESD-safe packaging; export-compliant labeling for international freight.
- Minimum 12-month warranty against manufacturing defects.
How to Order
- Online: Add to cart directly on this page — stock availability shown in real time.
- Email RFQ: support@konmask.com — include quantity, required delivery date, and end-use application.
- Phone / WhatsApp: +0086 19859288691 (Mon–Fri, 09:00–18:00 CST)
- Lead Time: In-stock orders ship within 1–3 business days; ex-stock lead time quoted on request.
- Payment: T/T, PayPal, credit card, and trade-term (FOB/CIF) options available.
Replacement & Compatibility FAQ
Q: Can I replace 330103-00-25-05-02-CN with the -00 connector variant?
A: Yes, electrically identical. You will need to re-terminate the CN connector in the field or use an adapter. Contact us for adapter availability.
Q: Is the Epro PR6423 a drop-in replacement?
A: Functionally equivalent in eddy-current principle and output range, but requires driver substitution (CON021 series). Not a direct plug-and-play swap without driver change.
Q: Does this unit work with the Bently Nevada 3500/40M monitor?
A: Yes, the 330103 series is fully compatible with the 3500/40M Proximitor I/O module when paired with the correct 330180/330185 driver.
Q: What is the maximum operating temperature for the probe?
A: The probe body is rated to +177°C continuous. For higher-temperature applications, consult Bently Nevada’s high-temperature probe options.
Q: Can Konmask.com supply the complete system (probe + extension + driver)?
A: Yes. We stock complete 3300 XL system sets. Request a BOM quote via email for bundled pricing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






