Bently Nevada 330104-00-25-10-02-CN Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-00-25-10-02-CN is a high-precision eddy-current proximity transducer system designed for continuous, non-contact measurement of shaft vibration, position, and eccentricity in rotating machinery. As an authorized sourcing partner, Konmask.com supplies genuine, tested, and equivalent-grade units with full traceability.
Technical Specifications
- Part Number: 330104-00-25-10-02-CN
- Brand / Manufacturer: Bently Nevada (Baker Hughes)
- Series: 3300 XL 8mm Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Probe Tip Diameter: 8 mm
- Cable Length: 25 ft (approx. 7.62 m)
- Output Signal: -18 VDC nominal
- Scale Factor: 200 mV/mil (7.87 V/mm)
- Frequency Range: DC to 10,000 Hz
- Operating Temperature: -35°C to +121°C (probe); -35°C to +66°C (extension cable)
- Connector Type: CN (Chinese market connector variant)
- System Components: Probe + Extension Cable + Proximitor® Sensor
- Approvals: CE, ATEX (consult datasheet for specific certifications)
- Weight: ~80 g (probe assembly)
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330104-00-25-10-02-CN. Always verify electrical and mechanical compatibility before substitution:
- 330104-00-25-10-02-00 — Standard international connector variant; functionally identical, different connector suffix
- 330104-00-25-10-02-05 — Alternate connector variant; same cable length and scale factor
- 330180-91-00 — 3300 XL NSv Proximity Transducer System; next-generation replacement with enhanced noise immunity
- 330130-040-00-00 — 3300 XL 11mm probe; larger tip diameter, compatible with same Proximitor® drivers
- PR6423/010-040 (Epro / Emerson) — Industry-standard 8mm proximity probe; widely used as cross-brand equivalent
- CWY-DO-810 (Shinkawa / domestic) — Chinese-market equivalent; confirm output polarity and sensitivity
⚠ Note: Always match cable length, scale factor (200 mV/mil), and connector type when selecting a replacement. Contact support@konmask.com for a free compatibility check.
Why Choose the Original Model
- Proven Reliability: The 3300 XL series has decades of field-proven performance in critical rotating machinery applications worldwide.
- API 670 Compliance: Designed to meet API 670 machinery protection standards — mandatory for turbines, compressors, and pumps in oil & gas.
- Seamless Integration: Plug-and-play with Bently Nevada 3500 Series Machinery Protection Systems and System 1® software.
- Consistent Scale Factor: Factory-calibrated 200 mV/mil ensures accurate vibration readings without field recalibration.
- CN Connector Variant: Optimized for Chinese industrial standards and local connector ecosystems, reducing field adaptation costs.
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor eccentricity and runout detection
- Gearbox and fan shaft displacement monitoring
- Power generation and petrochemical plant machinery protection
- Pulp & paper, steel, and heavy industrial rotating equipment
System Compatibility
- Proximitor® Sensors: 3300 XL series (e.g., 330180, 330185)
- Machinery Protection Systems: Bently Nevada 3500 Series (3500/40M, 3500/42M, 3500/45, 3500/46M)
- Monitoring Software: System 1® Evolution, System 1® Optimizer+
- DCS / PLC Integration: 4–20 mA or ±10 V analog output via Proximitor® to any DCS/PLC (Siemens, ABB, Honeywell, Emerson DeltaV, Yokogawa)
- Hazardous Area: Compatible with Bently Nevada IS barriers for Zone 0/1 installations
Selection Guide
Use the part number decoder below to select the correct 330104 variant for your application:
- 330104 — Base model: 3300 XL 8mm Proximity Transducer
- -00 — Standard probe configuration
- -25 — Cable length: 25 ft extension cable
- -10 — Probe body style / thread type
- -02 — Connector type group
- -CN — Chinese market connector variant
Key selection parameters:
- Required cable length (5 ft / 9 ft / 25 ft / 50 ft options available)
- Probe tip diameter (8 mm standard; 11 mm for larger shaft clearances)
- Target material (steel, stainless, or non-ferrous — affects calibration)
- Hazardous area classification (standard vs. IS/ATEX rated)
- Connector compatibility with existing installation
Quality Assurance & Sourcing
- ✅ Genuine & Tested: All units sourced from authorized channels or verified surplus with functional testing
- ✅ Traceability: Full documentation including certificates of conformance available on request
- ✅ Warranty: 12-month warranty against manufacturing defects
- ✅ Anti-Counterfeit: Visual inspection, serial number verification, and electrical parameter testing performed before shipment
- ✅ Packaging: Original OEM packaging or equivalent ESD-safe packaging
How to Order
- Confirm part number: 330104-00-25-10-02-CN
- Specify quantity and required delivery timeline
- Contact us via email or phone for a formal quotation
- Receive proforma invoice → confirm payment → shipment with tracking
📧 support@konmask.com | 📞 +0086 19859288691 | 🌐 konmask.com
Replacement & Compatibility FAQ
Q: Can I use 330104-00-25-10-02-00 instead of the -CN variant?
A: Yes, functionally identical — only the connector suffix differs. Verify physical connector fit at your installation.
Q: Is the 330180-91-00 a direct drop-in replacement?
A: The 330180 NSv series is the recommended next-generation upgrade. It is backward-compatible with 3500 Series monitors but may require a Proximitor® driver change. Contact us for a compatibility assessment.
Q: What target material is this probe calibrated for?
A: Factory-calibrated for AISI 4140 steel. For stainless steel or non-ferrous targets, a field recalibration or correction factor is required.
Q: Do you supply the full system (probe + cable + Proximitor®)?
A: Yes. We can supply the complete 3-component system or individual components. Specify your requirement when ordering.
Q: What is the lead time?
A: In-stock units ship within 3–5 business days. Special orders typically 2–4 weeks. Contact us for current availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






