Bently Nevada 330104-00-15-05-02-CN Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-00-15-05-02-CN is a high-precision eddy-current proximity transducer system designed for continuous, non-contact measurement of shaft vibration, position, and eccentricity in rotating machinery. As an authorized sourcing partner, Konmask.com supplies genuine, tested units and provides expert selection guidance for direct replacements and compatible equivalents.
Technical Specifications
- Part Number: 330104-00-15-05-02-CN
- Brand / Manufacturer: Bently Nevada (Baker Hughes)
- Series: 3300 XL 8mm Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Probe Tip Diameter: 8 mm
- Cable Length: 5 m (standard)
- Extension Cable: 5 m
- Driver / Oscillator: 3300 XL series compatible
- Output Signal: –24 VDC nominal (–18 V to –24 V range)
- Frequency Range: DC to 10,000 Hz
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 mm to 2.54 mm (10 mil to 100 mil)
- Temperature Range: –35 °C to +121 °C (probe); –35 °C to +66 °C (driver)
- Connector Type: CN (Chinese standard connector)
- Agency Approvals: CE, ATEX (consult datasheet for zone ratings)
- Weight: ~40 g (probe assembly)
Compatible Replacement & Equivalent Models
The table below lists direct drop-in replacements and functionally equivalent models for the 330104-00-15-05-02-CN. Always verify connector type, cable length, and driver compatibility before substituting.
| Model | Brand | Notes |
|---|---|---|
| 330104-00-15-05-02-00 | Bently Nevada | Same spec, standard international connector |
| 330104-00-15-05-02-05 | Bently Nevada | Armored cable variant |
| 330180-X1-05 | Bently Nevada | 3300 NSv series, functionally equivalent |
| PR6423/010-030 | EPRO (Baker Hughes) | 8 mm eddy-current, compatible driver |
| CWY-DO-810 | Zhonghang Electronics | Chinese domestic equivalent, same scale factor |
| TM0180-A05-B00-C05 | EMERSON / CSI | Cross-compatible with 3300 XL drivers |
Need a model not listed? Contact our engineers for a custom cross-reference.
Why Choose the Original Model
- Factory-calibrated scale factor (7.87 V/mm) ensures measurement accuracy without field re-calibration.
- Certified for hazardous areas — ATEX/IECEx ratings reduce compliance risk in petrochemical and power-generation environments.
- Seamless integration with Bently Nevada 3500 Series rack systems, System 1 software, and existing 3300 XL drivers.
- Long-term OEM support — firmware updates, spare parts, and technical documentation remain available through Baker Hughes.
- Proven MTBF in continuous 24/7 machinery protection applications.
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor eccentricity detection
- Gearbox and expander rotor dynamics analysis
- Petrochemical plant rotating equipment protection systems
- Power generation and nuclear plant machinery monitoring
System Compatibility
- Rack Systems: Bently Nevada 3500, 3300, 1900/65A
- Drivers: 3300 XL Driver (330180), 3300 RAM Driver
- Software: System 1 Evolution, System 1 Condition Monitoring
- DCS Integration: 4–20 mA output via signal conditioner; MODBUS/Profibus via gateway
- Target Material: Ferromagnetic and non-ferromagnetic metals (scale factor varies — confirm with Bently Nevada target correction tables)
Selection Guide
Use the part-number decoder below to select the correct 330104 variant for your application:
- 330104 — 3300 XL 8 mm Proximity Probe
- 00 — Standard probe body
- 15 — 1.5 m probe cable
- 05 — 5 m extension cable
- 02 — 5 m driver cable
- CN — Chinese standard connector (specify 00 for international connector)
Key selection criteria:
- Total cable length = probe cable + extension cable (must match driver input impedance spec)
- Connector type must match your existing junction box or driver input
- Confirm target material and apply correction factor if non-standard
- For ATEX Zone 1 installations, verify the complete system (probe + extension + driver) carries the required certification
Quality Assurance & Sourcing
- All units sourced from authorized distributors or OEM-certified channels
- Each unit undergoes incoming inspection: visual check, connector integrity, and output signal verification
- Traceability documentation (CoC, test reports) available on request
- Shelf-life managed under controlled storage conditions (temperature & humidity monitored)
- Anti-counterfeit verification available for critical applications
How to Order
- Confirm part number: 330104-00-15-05-02-CN
- Specify quantity and required delivery timeline
- Request a formal quotation via support@konmask.com or add to cart directly
- Provide end-use application details if export compliance documentation is required
- Lead time: typically 3–7 business days for in-stock units; 2–4 weeks for special orders
Replacement & Compatibility FAQ
Q: Can I use a 330104-00-15-05-02-00 (international connector) in place of the CN version?
A: Functionally identical — only the connector differs. You will need an adapter or re-termination at the junction box.
Q: Is the 330104 compatible with the older 3300 (non-XL) driver?
A: The 3300 XL probe is backward-compatible with most 3300 series drivers, but verify the driver’s input impedance and supply voltage specifications before installation.
Q: What is the difference between the 330104 and 330105 series?
A: The 330105 uses a 5 mm probe tip for tighter installation spaces; the 330104 (8 mm) offers a wider linear range and is preferred for most turbomachinery applications.
Q: Can EPRO PR6423 replace the 330104-00-15-05-02-CN directly?
A: The PR6423 is electrically compatible with 3300 XL drivers, but physical dimensions and connector types differ. Consult Konmask engineers for a site-specific assessment.
Q: Do you supply calibration certificates?
A: Yes. Factory calibration certificates and CoC documents are available upon request at no additional charge.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






