Bently Nevada 330104-00-24-05-01-00 – Eddy Current Proximity Transducer | 3300 XL Series Platform
Engineering Background: The Bently Nevada 3300 XL Proximity Transducer System is the industry benchmark for non-contact shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system is deployed globally in turbines, compressors, pumps, and motors where continuous, high-accuracy displacement monitoring is mission-critical.
Product Positioning: The 330104-00-24-05-01-00 is a complete eddy current transducer assembly configured for 5 mm tip diameter, 24-inch (approximately 610 mm) integral cable, 5-meter extension cable, and standard -24 VDC bias voltage output. It is fully compatible with Bently Nevada 3300 XL proximitor/seismic monitors and integrates directly into existing 3300 series monitoring racks without hardware modification.
Complete Technical Specifications
- Part Number: 330104-00-24-05-01-00
- Series / Platform: Bently Nevada 3300 XL Proximity Transducer System
- Transducer Type: Eddy Current (Non-Contact)
- Tip Diameter: 5 mm
- Integral Cable Length: 24 inches (~610 mm)
- Extension Cable Length: 5 meters
- Bias Voltage Output: -24 VDC (nominal)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 mm – 2.25 mm (10 mil – 90 mil)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Operating Temperature: -35°C to +177°C (transducer tip)
- Target Material: AISI 4140 steel (standard); other ferrous/non-ferrous targets require scale factor correction
- Connector Type: Standard BNC (integral cable to extension cable)
- Compliance: API 670, CE, RoHS
- Weight: ~40 g
Proven Application Environments
- Steam and gas turbines (radial shaft vibration, axial position)
- Centrifugal and reciprocating compressors
- Boiler feed pumps and large motor-driven equipment
- Gearboxes and expanders in petrochemical plants
- Power generation and oil & gas upstream/downstream facilities
- Any API 670-compliant machinery protection system
Engineering Advantages
- Non-contact measurement eliminates mechanical wear and enables continuous 24/7 monitoring without process interruption.
- Wide frequency response (DC–10 kHz) captures both slow-roll runout and high-frequency vibration harmonics in a single channel.
- High temperature tolerance allows direct installation in hot-section environments without additional thermal shielding.
- Direct rack compatibility with all 3300 XL proximitor monitors ensures zero re-calibration overhead when replacing legacy 330104 units.
- API 670 certified — accepted by EPC contractors and end-users as a qualified machinery protection component without additional qualification testing.
System Architecture & Signal Flow
The 330104-00-24-05-01-00 operates as part of a three-component eddy current system: Transducer Probe → Extension Cable → Proximitor/Monitor. The probe tip generates a high-frequency electromagnetic field (typically 1–2 MHz). As the conductive target (shaft) moves within the linear range, eddy currents induced in the target surface alter the probe’s impedance. The proximitor converts this impedance change into a calibrated DC voltage output (–24 VDC bias, ±linear range), which is fed directly to the 3300 XL monitor card for gap, vibration, and eccentricity measurements. Signal integrity is maintained across the full 5-meter extension cable with no active amplification required at the probe end.
Sourcing & Quality Verification
- All units sourced from authorized distributors or verified surplus channels with full traceability documentation.
- Each unit undergoes incoming inspection: visual check, connector integrity, cable continuity, and bias voltage verification against OEM datasheet tolerances.
- Original OEM labels, date codes, and serial numbers are preserved and documented.
- Certificate of conformance (CoC) available upon request for critical-service procurement.
- Konmask.com maintains a zero-counterfeit policy — units failing authentication are quarantined and not listed for sale.
Procurement Process
- Lead Time: In-stock units ship within 1–3 business days; EXW Xiamen, China.
- Shipping: DHL Express, FedEx International Priority, or sea freight for bulk orders.
- MOQ: 1 piece.
- Payment: T/T (wire transfer), PayPal, credit card via Shopify Payments.
- Export Documentation: Commercial invoice, packing list, and CoC provided as standard. HS Code: 9031.80 (precision instruments).
- Bulk / OEM Pricing: Contact support@konmask.com for orders of 5+ units.
Technical FAQ
Q: Is the 330104-00-24-05-01-00 compatible with the 3300 NSv monitor?
A: Yes. The 3300 XL transducer system is backward-compatible with 3300 NSv and standard 3300 series monitors when used with the appropriate proximitor. Verify the proximitor part number matches the cable length and tip configuration.
Q: Can this transducer be used on non-ferrous targets (e.g., aluminum shafts)?
A: Yes, but a target material scale factor correction must be applied. Bently Nevada provides correction curves for common non-ferrous materials. Contact our engineering team for application-specific guidance.
Q: What is the difference between the -01-00 and -02-00 suffix?
A: The last two digits denote the connector/termination style. -01-00 is the standard BNC integral cable configuration. -02-00 typically denotes an armored cable variant. Confirm your existing system configuration before ordering.
Q: How do I verify authenticity upon receipt?
A: Check the OEM label for legible part number, date code, and Bently Nevada branding. Measure open-circuit bias voltage with the proximitor powered — it should read within ±0.5 VDC of the nominal -24 VDC specification. Any deviation warrants further investigation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






