Turbomachinery Vibration Monitoring Solution — Bently Nevada 330104-09-20-10-01-00 | 3300 XL Series
The Bently Nevada 330104-09-20-10-01-00 is a complete 3300 XL Series Proximity Transducer System engineered for continuous, high-accuracy shaft vibration and radial position measurement in rotating machinery. Designed to meet API 670 requirements, this eddy-current-based system is the industry benchmark for turbomachinery protection and condition monitoring.
Where This Product Is Used
This proximity transducer system is specified by rotating equipment engineers and reliability teams across the following critical applications:
- Steam & Gas Turbines — Continuous radial shaft vibration monitoring to detect imbalance, misalignment, and rub conditions before catastrophic failure.
- Centrifugal Compressors — Real-time shaft position and dynamic motion measurement in high-speed compressor trains in LNG, refinery, and petrochemical plants.
- Pumps & Fans (API 610 / API 673) — Bearing housing and shaft proximity sensing for large boiler feed pumps and forced-draft fans in power generation.
- Gearboxes & Expanders — Differential expansion and eccentricity measurement in process expanders and speed-increasing gearboxes.
- Marine Propulsion Systems — Shaft monitoring on vessel propulsion turbines and auxiliary machinery where space and reliability are paramount.
- Hydro Turbines — Axial and radial position monitoring on vertical-shaft hydro generators.
Technical Specifications
| Part Number | 330104-09-20-10-01-00 |
| Series | 3300 XL Proximity Transducer System |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Sensing Technology | Eddy Current (Non-contact) |
| Probe Cable Length | 9 inches (229 mm) |
| Extension Cable Length | 20 feet (6.1 m) |
| Driver/Proximitor | 3300 XL 8mm Proximitor® |
| Output Signal | –24 VDC nominal; linear range –2 VDC to –18 VDC |
| Sensitivity | 200 mV/mil (7.87 V/mm) |
| Frequency Response | DC to 10,000 Hz (–3 dB) |
| Operating Temperature | –35°C to +121°C (probe); –35°C to +85°C (proximitor) |
| Target Material | AISI 4140 steel (standard) |
| Approvals | FM, CSA, ATEX, IECEx |
| Compliance | API 670 (5th Edition) |
| Weight | ~80 g |
Why Engineers Specify This Model
- Complete System Traceability — The SKU 330104-09-20-10-01-00 encodes probe length, cable length, and proximitor type, eliminating configuration ambiguity during procurement and MRO.
- API 670 Compliance Out-of-Box — Pre-matched probe/cable/proximitor system meets the machinery protection standard without additional calibration steps.
- Non-Contact Measurement — Eddy-current technology eliminates mechanical wear, enabling continuous operation across millions of shaft rotations.
- Wide Frequency Bandwidth — DC to 10 kHz response captures both slow-roll runout and high-frequency subsynchronous instabilities.
- Direct Integration with Bently Nevada 3500 Rack — Plug-and-play compatibility with 3500/40M and 3500/42M monitor modules; no signal conditioning adapters required.
- Hazardous Area Rated — ATEX/IECEx certification supports installation in Zone 1 and Zone 2 classified areas common in oil & gas facilities.
Complete System Bill of Materials
A fully functional proximity measurement loop using this part number typically includes:
- 330104-09-20-10-01-00 — Probe + Extension Cable + 3300 XL Proximitor® (this item)
- Bently Nevada 3500 Rack (e.g., 3500/05 Power Supply, 3500/15 I/O Module)
- 3500/40M or 3500/42M Proximitor I/O Module
- Mounting hardware: probe holder, lock nut, and bracket (application-specific)
- Shielded twisted-pair signal cable (field-supplied, per plant standard)
- DCS/PLC interface: 4–20 mA or digital (Modbus/PROFIBUS) output card
Contact Konmask for bundled BOM pricing and cross-reference support.
Compliance & Industry Standards
- API 670 — Machinery Protection Systems (5th Edition, 2014)
- API 670 Annex D — Proximity Probe Installation Guidelines
- IEC 60079 — Equipment for Explosive Atmospheres (ATEX/IECEx)
- ISO 7919 — Mechanical Vibration: Shaft Measurement
- ISO 10816 — Vibration Evaluation of Machines
- FM Class 3610 — Intrinsically Safe Apparatus
Quality Assurance & Sourcing
Konmask.com sources the Bently Nevada 330104-09-20-10-01-00 through verified industrial distribution channels. Every unit is:
- Inspected against OEM part number and label authenticity
- Tested for output voltage linearity prior to dispatch
- Shipped with original manufacturer documentation where available
- Backed by Konmask’s 90-day quality guarantee on new and surplus stock
We maintain traceability records for all serialized units. Certificates of conformance (CoC) and material test reports (MTR) available on request.
How to Source This Part
- Add to Cart — Place your order directly on this page for in-stock units.
- Request a Quote — Email support@konmask.com for volume pricing, lead time, or alternative configurations.
- Cross-Reference Support — Need a different cable length or proximitor type? Our team can identify the correct 330104-XX-XX-XX-XX-XX variant for your application.
- Expedited Shipping — DHL / FedEx international express available. Typical dispatch within 1–3 business days for in-stock items.
Application-Specific FAQ
Q: Can this transducer system be used with a non-Bently Nevada monitor?
A: The 3300 XL Proximitor outputs a standard –24 VDC buffered voltage signal compatible with most third-party vibration monitors that accept eddy-current probe inputs. Verify input impedance and voltage range with your monitor manufacturer.
Q: What shaft materials are compatible?
A: The system is calibrated for AISI 4140 steel. For stainless steel, titanium, or other alloys, a material correction factor must be applied. Contact Bently Nevada or Konmask for recalibration options.
Q: Is this part interchangeable with the 330104-09-20-10-02-00?
A: The last segment (-01-00 vs -02-00) typically denotes connector or housing options. Verify the exact configuration against your system drawing before substitution.
Q: What is the recommended gap voltage for radial vibration measurement?
A: The standard operating gap is set to produce –10 VDC ± 0.5 VDC at the Proximitor output. Refer to Bently Nevada Installation Manual 141536-01 for gap-setting procedures.
Q: Does Konmask offer installation or commissioning support?
A: We provide remote technical guidance and can connect you with certified Bently Nevada service partners in your region. Contact us at support@konmask.com.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






