FANUC A97L-0218-0988/270 Main Servo Drive | Replacement, Equivalent & Selection Guide
This page covers the FANUC Main Servo Drive series used across the R-2000iC, M-2000iB, and R-2000iC/210FJ3 robot platforms — including part numbers A97L-0218-0988/270, A97L-0218-0929450N-270, and A97L-0218-0989#261. Whether you are sourcing an OEM replacement, evaluating compatible equivalents, or selecting the correct drive for your robot model, this guide provides the technical detail and sourcing confidence you need.
Technical Specifications
| Parameter | Details |
|---|---|
| Brand | FANUC |
| Part Numbers | A97L-0218-0988/270 · A97L-0218-0929450N-270 · A97L-0218-0989#261 |
| Component Type | Main Servo Drive Unit |
| Compatible Robot Series | R-2000iC · M-2000iB · R-2000iC/210FJ3 |
| Drive Architecture | AC Servo, Multi-axis |
| Communication Interface | FANUC FSSB (Fiber-optic Servo Serial Bus) |
| Mounting | Controller cabinet integrated |
| Condition Available | New OEM · Refurbished · Exchange |
Compatible Replacement & Equivalent Models
The following part numbers are functionally related or cross-compatible depending on robot generation and controller revision. Always verify against your robot’s controller label and maintenance manual before substitution.
| Part Number | Robot Platform | Notes |
|---|---|---|
| A97L-0218-0988/270 | R-2000iC | Primary OEM reference |
| A97L-0218-0929450N-270 | M-2000iB | Heavy-payload variant |
| A97L-0218-0989#261 | R-2000iC/210FJ3 | Floor/inverted mount variant |
| A06B-6240 series | R-2000iC / R-2000iD | Next-generation servo amplifier — confirm compatibility with FANUC engineer |
Note: Cross-referencing requires matching firmware revision, axis count, and power rating. Contact Konmask for a free compatibility check.
Why Choose the Original Model
- Guaranteed firmware compatibility — OEM drives ship pre-matched to FANUC R-30iB / R-30iB Plus controller firmware without re-parameterization.
- Axis calibration integrity — Original servo drives retain factory torque curves and encoder feedback tuning, eliminating re-mastering downtime.
- Warranty continuity — Using genuine FANUC parts preserves any remaining OEM or integrator warranty on the robot cell.
- Long-term parts availability — FANUC maintains a global spare-parts network; sourcing OEM now avoids obsolescence risk as aftermarket supply tightens.
- Safety certification alignment — CE / UL-listed assemblies remain compliant only when replaced with certified OEM components.
Typical Applications
- Automotive body-in-white welding and assembly lines (R-2000iC)
- Heavy-payload palletizing and press-tending (M-2000iB)
- Overhead and inverted gantry operations (R-2000iC/210FJ3)
- Spot welding, material handling, and machine loading cells
- Servo drive replacement during scheduled preventive maintenance
- Emergency breakdown recovery to minimize production downtime
System Compatibility
| Component | Compatible Models |
|---|---|
| Robot Controller | FANUC R-30iB · R-30iB Plus · R-30iB Mate |
| Robot Arm | R-2000iC series · M-2000iB series · R-2000iC/210FJ3 |
| Servo Amplifier | A06B-6240 / A06B-6220 series (generation-dependent) |
| Teach Pendant | iPendant Touch (A05B-2518-C305 and variants) |
| Power Supply Unit | A16B-1212 / A16B-2203 series |
Selection Guide
Use the following decision flow to select the correct part number for your application:
- Identify your robot model — Check the nameplate on the robot base (e.g., R-2000iC/165F, M-2000iB/1200).
- Identify your controller revision — Open the controller cabinet door; the R-30iB revision label is on the main board.
- Match the part number suffix — The suffix (e.g., /270, #261) encodes the axis configuration and power rating. Do not substitute across suffixes without FANUC confirmation.
- Check firmware version — Drives must match the controller’s servo software version. Konmask can advise on version compatibility.
- Confirm mounting orientation — Floor-mount and inverted-mount variants (210FJ3) use different thermal management configurations.
- Contact Konmask — Send your robot serial number and controller label photo for a definitive part recommendation at no charge.
Quality Assurance & Sourcing
- Verified supply chain — All units sourced from authorized FANUC distributors or certified refurbishment centers with full traceability documentation.
- Pre-shipment inspection — Every drive undergoes power-on functional test, visual inspection, and connector integrity check before dispatch.
- Authenticity documentation — OEM units ship with original FANUC packaging, serial number, and certificate of conformity where available.
- Refurbished units — Carry a minimum 90-day warranty covering manufacturing defects; exchange units available for core-return credit.
- Global logistics — DHL Express / FedEx International Priority with full export documentation (commercial invoice, packing list, HS code 8537.10).
How to Order
- Add the correct part number to your cart, or contact us directly for volume pricing.
- Provide your robot serial number and controller firmware version for compatibility confirmation.
- Receive a proforma invoice with lead time and shipping options within 24 business hours.
- Payment via T/T bank transfer, PayPal, or trade assurance — whichever suits your procurement process.
- Track your shipment with a dedicated AWB number provided upon dispatch.
📧 [email protected] | 📞 +0086 19859288691 | 🌐 konmask.com
Replacement & Compatibility FAQ
Q: Can A97L-0218-0988/270 replace A97L-0218-0989#261 directly?
A: Not without verification. The suffix encodes axis count and power configuration. Contact us with your robot serial number for a definitive answer.
Q: Do you supply refurbished units with warranty?
A: Yes. Refurbished drives carry a 90-day warranty. Exchange programs are available — return your faulty core for a credit against the replacement unit.
Q: How long does shipping take to Europe / North America?
A: Typically 3–7 business days via DHL Express or FedEx International Priority from our warehouse in China.
Q: Can you provide a FANUC-certified repair service?
A: We work with FANUC-authorized repair centers. Contact us to discuss repair-and-return options for your specific unit.
Q: What documentation is included with OEM units?
A: Original FANUC packaging, serial number label, certificate of conformity, and commercial invoice for customs clearance.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691






