GT HVI-P4688-06 / 80026-044-06 Switching Power Supply Module | Replacement, Equivalent & Selection Guide
The GT HVI-P4688-06 (also referenced as 80026-044-06) is a Switching Power Supply Module designed for industrial automation and condition monitoring systems. As a critical power conversion component, it delivers stable, regulated DC output to downstream control and monitoring modules. Konmask.com supplies both original and verified-equivalent units to support your maintenance, upgrade, and replacement needs.
Technical Specifications
- Part Number: HVI-P4688-06 / 80026-044-06
- Module Type: Switching Power Supply Module
- Series: GT / HVI Series
- Manufacturer: GE / Bently Nevada
- Output Type: Regulated DC
- Weight: 260 g
- Mounting: Rack / Backplane
- Operating Environment: Industrial
- Condition: New / Refurbished / Tested Available
Compatible Replacement & Equivalent Models
When the original HVI-P4688-06 is unavailable or discontinued, the following models may serve as functional equivalents depending on your system configuration. Always verify electrical and mechanical compatibility before substitution.
- 80026-044-06 (OEM alternate part number)
- HVI-P4688-05 (prior revision — confirm firmware compatibility)
- HVI-P4688-07 (later revision — confirm backward compatibility)
- Third-party equivalent switching PSU modules with matching output voltage, current rating, and form factor
Contact Konmask.com for cross-reference verification before ordering a substitute.
Why Choose the Original Model
- Guaranteed compatibility with GE / Bently Nevada rack systems
- Validated firmware & hardware revision matching your existing installation
- No re-engineering risk — drop-in replacement with zero configuration changes
- Full traceability — original part numbers, revision codes, and test records available
- Warranty-backed supply from Konmask.com
Typical Applications
- GE / Bently Nevada condition monitoring systems
- Turbine protection and vibration monitoring racks
- Industrial DCS and PLC power distribution backplanes
- Oil & gas, power generation, and petrochemical plant automation
- Rotating machinery protection systems
System Compatibility
The HVI-P4688-06 / 80026-044-06 is designed for use within GE / Bently Nevada modular rack architectures. Confirm the following before installation:
- Rack chassis model and backplane connector pinout
- Input voltage range (AC/DC) supported by your installation
- Output voltage and current load requirements of downstream modules
- Firmware revision compatibility with system controller
Selection Guide
Use this guide to select the correct power supply module for your system:
- Step 1 — Identify your rack: Confirm the chassis model and slot assignment for the PSU.
- Step 2 — Check output specs: Match output voltage (V DC) and current (A) to your load requirements.
- Step 3 — Verify revision: HVI-P4688-XX suffix indicates hardware revision; confirm with your system documentation.
- Step 4 — Confirm redundancy: Determine if your system requires single or redundant PSU configuration.
- Step 5 — Contact Konmask: Share your rack model and existing PSU part number for expert cross-reference support.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels
- 100% functional testing prior to shipment
- Anti-static packaging with full inspection report available on request
- Traceable documentation: OEM part number, serial number, revision code
- Warranty: 12 months from date of shipment
How to Order
- Add the HVI-P4688-06 / 80026-044-06 to your cart on Konmask.com
- Or contact us directly with your PO, rack model, and required quantity
- Bulk and urgent orders welcome — lead time quoted within 24 hours
- Export documentation (CO, packing list, commercial invoice) available for international orders
📧 support@konmask.com | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Is the 80026-044-06 the same as HVI-P4688-06?
A: Yes. 80026-044-06 is the OEM catalog number; HVI-P4688-06 is the module-level part number. Both refer to the same unit.
Q: Can I use a different revision (e.g., -05 or -07) as a replacement?
A: Possibly, but revision changes may affect firmware compatibility or connector pinout. Contact Konmask for a verified cross-reference.
Q: Do you supply refurbished units?
A: Yes. All refurbished units are fully tested and carry the same 12-month warranty as new stock.
Q: What is the lead time for this module?
A: In-stock units ship within 1–3 business days. Out-of-stock units are quoted within 24 hours.
Q: Can Konmask.com help identify a compatible third-party equivalent?
A: Yes. Share your system specs and we will provide a verified equivalent recommendation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


